buzz/docs/nips/NIP-FA.md

NIP-FA

Federated Identity Adapter

draft optional

Depends on: NIP-FI (Federated Identity), NIP-98 (HTTP Auth), NIP-42 (Authentication of Clients to Relays)

Abstract

This NIP defines a provider-neutral HTTP contract between a Nostr client and an enterprise identity adapter. The adapter authenticates a user through a browser login, holds an adapter session for that user, and issues short-lived NIP-FI assertions that bind the user to a Nostr key the client proves it controls with NIP-98.

The adapter MAY use an OIDC or SAML provider, LDAP, or any other upstream identity system behind this boundary. Clients do not implement or depend on that upstream protocol. Discovery of which relays require enterprise identity, and of which adapter serves them, is outside this NIP.

Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 RFC 2119 RFC 8174 when, and only when, they appear in all capitals, as shown here.

• adapter: The HTTP service implementing this NIP. {adapter_base} is its base URL. The adapter is a NIP-FI assertion issuer, or fronts one: the assertions it returns are verified by relays exactly as NIP-FI assertions from that issuer.
• adapter session: The opaque session_token the adapter issues after browser login, and the fixed lifetime it describes.
• handoff secret: A high-entropy random value the client generates per login and reveals only during code exchange.

Browser login

The client MUST generate a high-entropy handoff secret, start a loopback callback listener, and open:

GET {adapter_base}/v1/login/start?return_to={callback_url}&handoff_challenge={base64url(sha256(handoff_secret))}&handoff_challenge_method=S256

The client's callback_url MUST use the http scheme with a loopback IP literal host (127.0.0.1 or [::1]), as defined in RFC 8252 §7.3.

The adapter authenticates the user however the operator chooses, binds the completed browser login to handoff_challenge, and redirects to the exact return_to loopback callback. Adapters SHOULD accept loopback callbacks on any port, as recommended by RFC 8252 §7.3, and MUST reject any return_to whose host is not exactly 127.0.0.1 or [::1], including localhost and other 127.0.0.0/8 addresses. Success redirects to:

{callback_url}?code={single_use_code}

Failures MAY redirect to the same callback with error and optional error_description query parameters.

The code alone is not a credential. The adapter MUST accept it only when the exchange presents the matching handoff secret, MUST accept each code at most once, and SHOULD expire unexchanged codes within minutes. Adapters MUST reject any handoff_challenge_method other than S256.

Browser navigation MAY follow the adapter's identity-provider redirects. The non-browser adapter calls below MUST NOT depend on redirect handling.

Code exchange

The client MUST exchange the browser code with an HTTP client that does not follow redirects, and MUST treat any 3xx response as a failed exchange, so that {code, handoff_secret} is never replayed to a redirect target.

POST /v1/login/exchange
Content-Type: application/json

{
  "code": "single-use-code-from-callback",
  "handoff_secret": "base64url-random-secret"
}

Success response:

{
  "session_token": "opaque-adapter-session-token",
  "expires_at": "2026-09-23T21:00:00Z",
  "email": "employee@example.com",
  "profile_projection": {
    "username": "employee",
    "display_name": "Employee Name"
  }
}

expires_at is an RFC 3339 timestamp. email and profile_projection are OPTIONAL. See Privacy for when a client may publish profile_projection.

The exchange expires_at and a later session-check expires_at MUST describe the same fixed adapter session. After code exchange, the client MUST call /v1/session before committing the login. Clients MUST compare the two values as instants, not as strings, and MUST reject the login when they differ, so a code exchange cannot commit a different session than the one verified by /v1/session.

Session check

The client checks or reuses an adapter session with an HTTP client that does not follow redirects, and MUST treat any 3xx response as a failed session check, so that Bearer session credentials are never replayed to a redirect target.

GET /v1/session
Authorization: Bearer {session_token}

The success response uses the same shape as the exchange response, except session_token is omitted:

{
  "expires_at": "2026-09-23T21:00:00Z",
  "email": "employee@example.com",
  "profile_projection": null
}

The adapter MUST return 401 session_required or session_expired, with the same body shape and meaning as in Denials, when the token is missing, invalid, or expired. The client MUST discard the adapter session, and only the adapter session, on those responses. Clients MUST handle 429, 5xx, and network failures as in Denials: keep the session and retry with bounded backoff. Any other non-success response is a failed check that does not discard the session.

Relay assertion

Before connecting to a NIP-FI-protected relay, the client asks the adapter for a short-lived NIP-FI assertion naming the Nostr key it will connect with. The request carries two credentials: the adapter session, which proves who the user is, and a NIP-98 proof, which proves the client controls the key.

POST /v1/identity/assertions
Authorization: Bearer {session_token}
Nostr-Authorization: Nostr {base64-NIP-98-event}
Content-Type: application/json

{
  "relay_url": "wss://community.example.com",
  "nostr_pubkey": "<64-char lowercase hex public key>"
}

• relay_url selects an adapter-configured relay; the adapter MUST NOT fetch it. An adapter MAY obtain its exact relay list from a configured, authenticated source; it MUST still compare relay_url exactly. Clients MUST send it in the canonical form wss://host[:port], with the scheme in lowercase, a DNS host as its lowercase ASCII (A-label) form with no trailing dot, an IPv4 host in dotted-decimal form, an IPv6 host in brackets in its RFC 5952 text form (for example wss://[2001:db8::1]:8443), the default port omitted, and no trailing slash, path, query, or fragment. Relay authorities on port 80 are not supported: clients MUST NOT send, and adapters MUST NOT configure, a relay_url with port 80. Adapters MUST configure relays in this canonical form and MUST compare relay_url against it exactly. An unknown relay MUST be rejected with 403 authorization_denied.
• nostr_pubkey is the lowercase hex key the client will authenticate to the relay with. The NIP-98 event MUST be signed by this key, use kind 27235, carry exactly one u tag equal to the absolute URL of this endpoint, exactly one method tag of POST, and exactly one payload tag equal to the lowercase hex SHA-256 of the exact request body bytes. Its created_at MUST be no more than 60 seconds old and MUST NOT be more than 5 seconds in the future.
• The request body is limited to 4096 bytes and MUST NOT be content-encoded. A content-encoded body, such as a gzipped body, MUST be rejected with 400 invalid_request. Unknown fields MUST be rejected with 400 invalid_request.
• Credential handling is covered in Security Considerations.

Success response (200, Cache-Control: no-store):

{
  "assertion": "<compact-JWS-assertion>",
  "nostr_pubkey": "<64-char lowercase hex public key>",
  "expires_at": 1790000300
}

expires_at is the assertion exp as Unix seconds. Adapters MUST issue assertions with exp - iat <= 300 seconds and MUST NOT set exp later than the adapter session's expiry. Clients MAY refuse an assertion with more than 300 seconds remaining when it arrives. The 5-minute cap is a rule of this NIP, not a relay constant: the relay enforces the token exp and its own deployment-configured maximum_assertion_age.

Adapters MUST issue dedicated NIP-FI assertions whose protected typ is exactly nip-fi+jwt and that carry the NIP-FI required claims; as NIP-FI requires, sub is never an email address. The assertion's aud MUST be https:// followed by the authority of the canonical relay_url, unchanged: wss://community.example.com maps to https://community.example.com, wss://c.example.com:8443 to https://c.example.com:8443, and wss://[2001:db8::1]:8443 to https://[2001:db8::1]:8443. This is the canonical host URI of the community the relay resolves from the connection's Host. The assertion's nostr_pubkey MUST be the key that signs the NIP-42 relay login; the relay rejects any other key. Clients MUST reject a response whose nostr_pubkey differs from the key sent in the request.

An adapter MUST NOT issue an assertion for an agent key through a user's own authentication. It MUST issue agent-key assertions only under an owner-authorized grant: a durable record, created through the owner's own authentication, that binds the agent key to the owner. A grant MAY be held by the agent as a credential or kept by the adapter for agents it operates. The adapter MUST issue only while the owner authorization recorded in the grant remains valid. Revoking the owner MUST invalidate every grant the owner authorized before the revocation, and a later authentication by the owner MUST NOT revalidate them. Agent-key assertions follow NIP-FI "Agent keys".

A client that rejects a 200 response, including one it cannot parse, MUST treat it as a refusal: keep the session, show it as refused, and not retry automatically.

Denials

Denials return a JSON body {"error": "<code>"} with Cache-Control: no-store. Clients MUST take the client action listed for each code:

Status	error	Meaning	Client action
400	invalid_request	Malformed body, unknown fields, a missing or repeated Nostr-Authorization header, a repeated Authorization header, or any session credential other than exactly one Authorization: Bearer header	Keep the session, show the error, do not retry automatically
401	session_required	No adapter session was presented, or the presented one is not usable	Clear the adapter session and return to browser login
401	session_expired	The adapter session ended	Clear the adapter session and return to browser login
403	authorization_denied	The user or relay is not authorized for assertions	Keep the session, disconnect from that relay, show access denied, do not retry automatically; a manual retry or app restart asks again
403	invalid_proof	The NIP-98 proof failed verification	Keep the session, show the error, do not retry automatically
403	binding_mismatch	The adapter has bound this user to a different Nostr key	Keep the session, show the error, do not retry automatically
413	request_too_large	The body exceeds 4096 bytes	Keep the session, show the error, do not retry automatically
429	rate_limited	Too many requests	Keep the session, retry with bounded backoff
503	issuance_unavailable	The adapter could not issue an assertion	Keep the session, retry with bounded backoff

Clients MUST keep the session and retry 429 and any 5xx status with bounded backoff, whatever the error code. Clients MUST treat any other status, or a 400/401/403/413 with a code this NIP does not define, as a refusal: keep the session, show it as refused, and not retry automatically.

A missing session MUST be reported as 401 session_required, never 400. Clients MUST handle network failures like 429 and 5xx: keep the session and retry with bounded backoff. Clients SHOULD honor Retry-After when present, and SHOULD show the failure to the user after a bounded number of attempts.

An adapter MAY return session_required for an invalid, expired, or revoked credential; adapters that distinguish ended sessions MAY return session_expired. Clients MUST handle both identically.

NIP-FI assertion transport

The adapter session header above is only for client-to-adapter requests. It is not the relay's NIP-FI proof transport, and adapter sessions MUST use only Authorization: Bearer.

For HTTP routes protected by NIP-98, the relay proof uses the headers defined by NIP-FI:

Authorization: Nostr <base64-NIP-98-event>
Nostr-Federated-Identity: Bearer <compact-JWS-assertion>

WebSocket connections send only Nostr-Federated-Identity on the upgrade request and then prove the key with NIP-42 AUTH. Blossom media routes carry a kind 24242 event in Authorization. See NIP-FI for both.

Security Considerations

• Clients MUST send session_token only to the adapter's origin (the scheme, host, and port of {adapter_base}), and MUST NOT send it to a relay or any other origin. A leaked session token lets its holder request assertions for a key they control until the adapter binds the user to a key.
• Clients and adapters MUST NOT log credentials: the Authorization and Nostr-Authorization header values on every adapter request, including /v1/session, and the handoff_secret and session_token values in the code exchange request and response.

Privacy

NIP-FI defines no public identity projection. Adapter responses are private login state by default. Clients MUST NOT publish profile_projection fields to a public Nostr profile unless the operator has explicitly opted into managed public profiles. Operators that want managed public profiles MUST make that an explicit policy choice and provide explicitly publishable profile_projection fields. Raw upstream claims, legal names, emails, issuer identifiers, subjects, and assertion contents MUST NOT be written to public Nostr events implicitly.

Out of scope

• Discovery of which relays require enterprise identity and which adapter serves them.
• The upstream identity protocol between the adapter and its identity provider.