Adds an **Ultracode** session config option. It turns on Claude Code's
dynamic workflows for every task, at any effort level. Clients that
support boolean config options get a native switch; the rest get an
On/Off select. This follows the Fast mode pattern.
## How the CLI handles ultracode (2.1.310, checked against the bundled
binary and a live session)
- **Which models:** ultracode works on exactly the models that support
`xhigh` effort. The CLI uses the same check for both. So Opus 4.7+,
Sonnet 5+, Haiku 5.5 and Fable qualify; Opus 4.6 and Haiku 4.5 don't.
Effort level no longer matters.
- **Workflows:** dynamic workflows must be enabled. They are off by
default on Pro plans, and org or managed policy can turn them off.
- **State reporting:** `query.getSettings()` returns
`applied.ultracodeAvailable` and `applied.ultracodeRequested`. The CLI's
schema says hosts should "offer an Ultracode control only while this is
true". This method exists at runtime but is missing from the SDK's
`.d.ts`, so the adapter reads it with a cast and falls back to settings
and model data when it is absent.
- **Unsupported requests:** `applyFlagSettings({ultracode})` is never
validated. The request is stored and stays in place across model
switches; it takes effect whenever the model supports it.
- **Effort changes:** an `effortLevel` change sent without an
`ultracode` key turns ultracode off.
## Behavior
- **Visibility:** at session start, one `getSettings()` call decides
availability and the starting value. Model switches combine the
workflows result learned at start with the new model's
`supportedEffortLevels`, so the switch path makes no extra control
request.
- **Value:** the session tracks the user's choice, like
`fastModeEnabled`. The option hides on unsupported models and comes back
with the same value.
- **Effort applies:** `effortFlagSettings` now carries the session's
toggle instead of `settings.ultracode`. This applies at the initial
apply, on model switch, and from the effort picker, so effort changes no
longer turn ultracode off.
- **Clear context:** the clear-context restart restores the toggle, as
it does Fast mode.
## Known limitation
If a user types `/effort ultracode on` as a prompt, the toggle does not
update. The adapter already doesn't pick up effort changes typed as
`/effort` commands.
## Testing
- New `src/tests/ultracode-config.test.ts`. It covers the helpers and
session behavior: seeding from the CLI's report, hiding while workflows
are off, following the model's support, keeping the value across effort
and model switches, and rejected applies.
- New clear-context restore test. `effortFlagSettings` tests updated.
- Live probe against CLI 2.1.310 confirmed the `getSettings` fields, the
`xhigh` proxy (`claude-opus-4-6` reports unavailable while the request
stays in place), and the effort/key behavior.
- `npm run check`, `npm run build`, `npm run test:run` all pass.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
#1233 fixed queued prompts folded into task-notification cycles. One
case remains: a steer sent to the active prompt can be folded into an
autonomous cycle, leaving `session/prompt` pending when the result names
only the steer UUID.
Keep queued prompt matching and also match the active turn's steer UUID.
Exclude settled turns and turns held open for background tasks. Preserve
plural UUID precedence.
The six new settlement cases fail on main and pass with the fix; all 11
new tests pass. Build, lint and format checks pass. The full default
suite reports 2,497 passed and 30 skipped with an identical Node binary
at a separate path. At `/usr/bin/node`, it reports 2,496 passed, one
failed and 30 skipped: an unchanged path-normalization test also fails
on main. No test was weakened. No live-provider tests were run.
Co-authored-by: Sean McCullough <sean@mcculloughs.io>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
When Claude uses the advisor server tool, a completed turn can fail with
`ACP error -32603: Internal error: Claude ended the turn without
returning results for tool calls: srvtoolu_...`. `server_tool_use` is
tracked as a foreground call, but the matching `advisor_tool_result` is
discarded, leaving that call unfinished at settlement.
Route advisor results through the existing tool-result handler so they
clear the outstanding call and publish a terminal update. Plaintext
advice is displayed, redacted advice gets a readable completion message
without exposing ciphertext, and advisor error results publish a failed
tool status with the error code. Release the advisor's hook callback
immediately because the server tool has no later client-side
`PostToolUse` hook.
Addresses the result-lifecycle part of #914.
Validation:
- Regression coverage through the real prompt consumer for plaintext,
redacted, and error results, including the complete assistant message
that dispatches the advisor call. All three cases fail without the fix.
A dispatched advisor call without a result still fails with
`incomplete_tool_call`.
- `npm run test:run -- src/tests/incomplete-tools.test.ts`: 59 passed.
- `npm run test:run`: 3,055 passed, 30 skipped.
- `npm run build` and `npm run check`: passed.
- Exact-head Linux CI passed in the fork:
https://github.com/mrmans0n/claude-agent-acp/actions/runs/38595756003.
The upstream PR workflows are waiting for maintainer approval to run.
The required upstream `Build` check remains pending; the fork CI result
does not satisfy that merge gate.
Fixes#1246.
When `availableModels` includes aliases and pinned IDs that inherit the
same SDK display name, name-only model pickers show indistinguishable
rows. Append the selectable model ID to names that remain duplicated
after the existing version-label normalization. For example, the four
`Opus 5.5` rows become `Opus 5.5 (opus)`, `Opus 5.5 (opus[1m])`, and
their explicit-ID equivalents.
Keep every option and its ID, description, selection, and recommendation
behavior. Existing distinct labels stay unchanged. Regression tests
exercise the real allowlist transformation and cover duplicate custom
labels too.
Validation:
- Linux, locked dependencies and the repository's `lts/*` Node
configuration: `npm run check`, `npm run build`, and the full test suite
passed at ba37dd8: **2,491 passed, 30 skipped** ([fix
job](https://github.com/jipeng6036-del/claude-agent-acp/actions/runs/37923655565/job/113797353655)).
- Exact baseline 908c994: **2,489 passed, 30 skipped**; both new
regression tests fail against the original implementation. All existing
test outcomes match ([baseline
verification](https://github.com/jipeng6036-del/claude-agent-acp/actions/runs/37923859076)).
- Windows/Node 24: build and 105 focused tests passed. The full suite
has the same 48 failures on baseline and fix; only the two new tests add
passes. Authenticated SDK and JetBrains UI integration were not run.
Signed-off-by: Jasper <241105014+jipeng6036-del@users.noreply.github.com>
Co-authored-by: Jasper <241105014+jipeng6036-del@users.noreply.github.com>
Fixes#1370
After a compaction in the same turn, the synthetic usage-limit frame is
dropped by the stale-frame suppression before its failure details are
read. The prompt then ends with a generic internal error instead of the
quota error, so clients can't show the limit UI.
The suppression branch now records the usage-limit title and error
before it skips the frame. Only recognized usage-limit frames are read
there, so a stale replayed frame still can't overwrite the failure of
the current turn.
Added a test for a usage-limit frame after a completed compaction, for
both the legacy `errorKind` and the typed session failure, plus a stale
frame arriving after it. It fails without the change. `npm run check`,
`npm run build` and `npm run test:run` pass.
## What breaks
On Windows, `npm run test:run` fails inside `src/tests/acp-v2.test.ts`,
and every failure is raised by the teardown rather than by the behaviour
the test checks. Measured on Windows 11 build 26200, Node 22.22.3,
vitest 5.0.4, two runs:
```
$ node node_modules/vitest/vitest.mjs run src/tests/acp-v2.test.ts
Test Files 1 failed (1)
Tests 45 failed | 91 passed (136)
Duration 11.75s (tests 91%, transform 7%, import 2%)
```
```
Test Files 1 failed (1)
Tests 53 failed | 83 passed (136)
Duration 11.79s (tests 96%, import 2%, transform 2%)
```
Exit code 1 both times. Every failure is the same error, and it comes
from `afterEach`, after the test body has finished:
```
FAIL src/tests/acp-v2.test.ts > ACP v2 prompts > does not report the next turn as waiting for a question that its client never settled
Error: EBUSY: resource busy or locked, rmdir 'C:\Users\...\Temp\acp-v2-TNkkd2\project-J9PwxJ'
FAIL src/tests/acp-v2.test.ts > ACP v2 prompts > the tool calls that a cancel stops > ends a stopped tool call and its subagent's as cancelled, before it reports idle cancelled
Error: EBUSY: resource busy or locked, rmdir 'C:\Users\...\Temp\acp-v2-O3wrrr\project-NgBUMz'
```
The string `EBUSY` occurs 45 and 53 times in those two logs, matching
the two failure counts. The failing set moves between runs; which test
loses the race depends on when Windows releases each directory handle.
CI runs the suite on `ubuntu-latest` only
(`.github/workflows/ci.yml:20`, `:45`), so CI cannot show this. Anyone
who runs the documented `npm run test:run` on Windows gets a red file
and a non-zero exit.
## Why
The per-test teardown at `src/tests/acp-v2.test.ts:156` is:
```ts
await rm(tempDir, { recursive: true, force: true });
```
`force: true` suppresses ENOENT only; it does not retry EBUSY. Each
test's cwd is a child of `tempDir` (`cwd = await
mkdtemp(path.join(tempDir, "project-"))`, line 147), and Windows keeps a
directory busy briefly after the process holding it exits, so `rmdir`
returns EBUSY, `afterEach` rejects, and vitest marks the test failed.
## The fix
```diff
- await rm(tempDir, { recursive: true, force: true });
+ await rm(tempDir, { recursive: true, force: true, maxRetries: 10 });
```
`maxRetries` is Node's own retry loop for `fs.rm`, covering EBUSY,
EMFILE, ENFILE, ENOTEMPTY and EPERM with a backoff between attempts. The
repository already uses it for the same class of problem in
`src/tests/session-hooks.test.ts:150`:
```ts
// The CLI may still write the transcript of the last session after dispose.
if (root) await rm(root, { recursive: true, force: true, maxRetries: 10 });
```
## Measured after
```
$ node node_modules/vitest/vitest.mjs run src/tests/acp-v2.test.ts
Test Files 1 passed (1)
Tests 136 passed (136)
Duration 16.16s (tests 96%, transform 2%, import 2%)
```
A second run after restoring the patched file: `Tests 136 passed (136)`,
`Duration 16.56s`, exit code 0, `EBUSY` count 0. `npm run check` (eslint
plus `prettier --check .`) also passes, and `npm run build` (`tsc`,
whose `include` covers `src/**/*.ts` so the test file is typechecked
too) exits 0.
## Scope
1 file changed, 1 insertion, 1 deletion: `src/tests/acp-v2.test.ts`.
Deliberately not changed:
- No other test file, and no teardown other than this one call.
`session-hooks.test.ts` is untouched.
- No assertion, fixture, mock or production code, so the 136 tests still
check exactly what they checked before.
- No CI change. Adding a Windows job is a separate call about CI time
and runner budget, and this fix can be verified on Windows without one.
## Unproven
- I have one Windows 11 machine. On `ubuntu-latest` the teardown did not
fail here before or after the patch, and I did not run the job on Linux;
the Linux side is "no behaviour change" by inspection, not something I
measured.
- `maxRetries: 10` covers a handle that closes shortly after the process
exits. A handle held for longer than the whole retry window would still
surface EBUSY; I did not observe one.
- I ran only this file, not the full suite, so I cannot say whether
other files fail on Windows for other reasons.
`runCliAuthProbe` builds `["auth", "status", "--json"]` and, when the
session has a settings
override, appends `--settings <json>`. `--settings` is a global option
of the Claude Code CLI;
the `auth status` subcommand only accepts `--json` and `--text` (see
`claude auth status --help`).
So every probe with an override fails with `error: unknown option
'--settings'` and an empty
stdout. The catch branch logs `claude auth status failed: …` on every
call and returns
`undefined`. For sessions that pass `_meta.claudeCode.options.settings`,
the session-creation and
per-prompt refreshes therefore never update the auth status. Only the
initialize probe, which has
no override, still works.
This moves `--settings <json>` in front of the subcommand. Without an
override the argv is
unchanged.
**Reproduce** (no credentials needed; an empty config dir answers "not
logged in"):
```sh
d=$(mktemp -d)
env -i HOME="$d" PATH="$PATH" CLAUDE_CONFIG_DIR="$d/.claude" \
claude auth status --json --settings '{}'
# error: unknown option '--settings'
env -i HOME="$d" PATH="$PATH" CLAUDE_CONFIG_DIR="$d/.claude" \
claude --settings '{}' auth status --json
# {"loggedIn": false, "authMethod": "none", ...}
```
The option is applied in the global position, not just parsed:
`claude --settings '{"apiKeyHelper":"/bin/echo rt-fake-key"}' auth
status --json` reports
`"loggedIn": true, "authMethod": "api_key_helper"`.
Tested with 10 native Claude Code binaries (linux-x64), each in an empty
`HOME`:
| Claude Code | `auth status --json --settings '{}'` | `--settings '{}'
auth status --json` |
|---|---|---|
| 2.1.286 | unknown option | JSON |
| 2.1.294 | unknown option | JSON |
| 2.1.295, 2.1.296, 2.1.299 | unknown option | JSON |
| 2.1.300, 2.1.301, 2.1.302 | unknown option | JSON |
| 2.1.303 (the SDK's `claudeCodeVersion`) | unknown option | JSON |
| 2.1.304 | unknown option | JSON |
The existing test in `auth-status.test.ts` pinned the old order; it now
expects `--settings`
first. Its mock and `statusCalls()` matched probes by `args[1] ===
"status"`, which a leading
global option shifts, so both now locate the subcommand instead.
`npm run build`, `format:check`, `lint` and `test:run` pass, apart from
one test that fails
identically on `main` without this change.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A foreground fork can stream a copied `tool_result` for the Agent call
that launched it. That placeholder completed the call and removed its
tracked state, so the real report arriving later was dropped. Ignore
only results whose tool ID equals the message's parent tool ID, keeping
the launching call open for its actual report.
Keep other results in the same message and discard the message-level
`tool_use_result` sidecar when its launch result was removed, so it
cannot be attributed to a remaining tool result. Regression coverage
exercises plain and Air clients, root and nested launch results, and a
mixed message containing a genuine nested Agent result.
Fixes#1389.
Validation:
- [Linux
CI](https://github.com/agentclientprotocol/claude-agent-acp/actions/runs/40217593917)
passes the full suite: 3,304 passed, 32 skipped (57 test files passed, 4
skipped). All PR checks are green.
- `npm run check` and `npm run build` pass.
- `vitest run src/tests/acp-agent.test.ts --maxWorkers=1`: 712 passed,
10 skipped. The four new regression cases fail on the original code and
pass with the fix.
- Eight actual-SDK runs against localhost fake gateways complete
successfully without model calls: plain and Air foreground forks, native
Air child sessions, nested forks with the background option omitted or
false, the SDK's fork-inside-fork rejection, a background launch
receipt, and history replay. Foreground reports arrive exactly once and
no launch-result tracking warning remains.
The local full-suite run encountered 19 failures in
`session-index.test.ts` and then stopped progressing, so it was
interrupted. A standalone recursive-file-watcher probe also emits
`EMFILE` on this machine. The successful Linux CI run above provides the
complete-suite verification.
Review dependencies (updated 26 October):
| Related proposal | Relationship to this PR |
| --- | --- |
|
[#1408](https://github.com/agentclientprotocol/claude-agent-acp/pull/1408)
— targeted session lookup | Independent. Both orders merge cleanly onto
the checked main and produce the same tree. |
|
[#1422](https://github.com/agentclientprotocol/claude-agent-acp/pull/1422)
— resumed subagents | Complementary, with no dependency on this PR. It
now conflicts with upstream main in `src/acp-agent.ts`; its author needs
to resolve that conflict, integrate the [separately shared AIR routing
patch](https://github.com/agentclientprotocol/claude-agent-acp/pull/1422#issuecomment-6401008862)
and complete its validation. |
<details>
<summary>Additional local integration validation — 25 October</summary>
A local combination of the recorded main, #1408, #1431, #1422 and the
already-reviewed routing patch passed 199 focused
foreground/resume/native-subagent checks (647 other cases filtered or
skipped), TypeScript build, and two replays of previously captured SDK
frames for AIR and standard subagents. The two captured-frame replays
were independently repeated. No new model calls were made.
The combination is a private test tree, not a published change. It does
not replace full CI for #1422 or live Air acceptance. The routing patch
needed three-way application against that recorded main because its
surrounding source had moved; it applied cleanly that way. The
current-main conflict in #1422 means this historical result does not
establish today’s combined compatibility.
Checked main `739dde3`, #1408 `e3b3aa4`, #1431 `8f96f46`, #1422
`dd3bf2c`. The two orders of #1408 and #1431 produce tree `1716d7e`; the
full local test tree is `61c0447`. Refresh this evidence if these inputs
change.
</details>
Co-authored-by: Codex <codex@openai.com>
Updates `@anthropic-ai/claude-agent-sdk` from 0.3.309 to **0.3.310**
(Claude Code **2.1.310**), `@agentclientprotocol/sdk` 2.0.1 → 2.0.2 and
`@anthropic-ai/sdk` 1.1.0 → 1.3.0.
TypeScript stays on 6.0.3, because typescript-eslint 8.72 still requires
`typescript <6.1.0`.
## Behaviour changes ACP users may notice
- **2.1.310:** the Monitor tool and plugin monitors now run on Bedrock,
Vertex and Foundry, and with telemetry or nonessential traffic disabled.
On those setups, long foreground sleeps are now blocked. We already hide
Monitor tasks from the client (`local_monitor` / `HIDDEN_TASK_TOOLS`),
so the only visible change is that a blocked sleep shows up as a failed
Bash call.
- **2.1.310:** when an MCP tool call times out because its elicitation
went unanswered, the error now tells Claude not to repeat the call.
## Upstream fixes this picks up
- Requests behind gateways that reject the `effort-2025-11-24` beta or
mid-conversation system messages are retried without them. This affects
our `providers/set` gateway sessions.
- After a "Prompt is too long" error, compaction now trims dense content
(base64, SVG) properly, so the next request no longer fails again.
Compaction in SDK sessions with very large transcripts also uses less
memory.
- File read permission prompts now show where a symbolic link leads.
- Windows: PreToolUse and PermissionRequest hooks no longer let a tool
call through when Git Bash is missing and the hook's command is only
quoted strings.
## Checked, no change needed
- **Agent SDK 0.3.310:** the `sdk.d.ts` diff is doc text only
(`connectorId` in the `sdkMcpServerConfigs` comment, and the provider
list for `'highlights'` thinking display). Every `CLAUDE_*` env var the
adapter reads is still in the 2.1.310 binary.
- **ACP SDK 2.0.2:** only fixes the HTTP transport (CR line endings in
SSE, request-scoped POST failures), which we don't use.
- **`@anthropic-ai/sdk` 1.2/1.3:** adds API endpoints (message threads,
usage/cost reports, Claude Tag); we only use its types.
Verified: `npm run build`, `npm run check`, `npm run test:run` (3323
passed, 30 skipped), and a typecheck of `examples/`.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
## Summary
Follow-up to #1433, which was merged before these review fixes landed.
- **RFD child models after a load.** On a real `session/load` (session
not live in this process), #1433 also gave `RfdSubagentReplay` no model
list, so after the load response `currentStates` could not map a child's
model to the root session's `model` entry. RFD children kept the raw
model ID. The replay now reads the session's models when needed; only
the in-replay mapping is off while the load replays.
- **Retry after a failed publish.** `reportModel` skipped a model that
matched the stored options, which are written before the publish. A
failed publish then blocked every later report of the same model. It now
compares with the last model the client actually received.
- **Failed load replay.** The replayed child models are also dropped
when the replay itself fails.
- The buffer of an unannounced child collapses only model reports from
`reportModel`; other config updates stay as they are.
## Tests
- `replayRfd` gained a `load` option that replays like a real load;
"sends the model of each child's responses, and after the load response
only a changed entry" uses it (fails without the fix).
- A retry after a failed publish, for the RFD and AIR forms.
- "refines an ended AIR child's model" now goes through the load path.
- `npm run build`, `npm run check`, `npm run test:run`: 3323 passed, 30
skipped.
## Related
- Follow-up to #1433 and #1432
- RFD change:
https://github.com/agentclientprotocol/agent-client-protocol/pull/2482
- RFD section: [Child
configuration](https://github.com/agentclientprotocol/agent-client-protocol/blob/main/docs/rfds/subagents.mdx#child-configuration)
- JetBrains issue:
[IJAI-4754](https://youtrack.jetbrains.com/issue/IJAI-4754)
## Summary
#1432 made an AIR `session/load` replay wait for the CLI start before it
sent the children's models. So the end of every such replay
(`loadReplayEnd` and the children's `subagent_state_update`) came only
after the CLI started, also for a history without subagents.
- The replay no longer waits. It sends each child's model as the replay
reaches it. During a load the session's model list is not known yet, so
the model goes as its id.
- After the load response, each replayed child whose model the list maps
to another entry gets that entry. This also applies to a child that the
replay already ended. It is a more exact snapshot of the same
configuration.
- `modelEntryFor` and `modelDisplayName` keep their results per model
list. `reportModel` skips a model that the child already has.
- The buffer of a child that is not announced yet keeps only its latest
configuration update, so model reports do not crowd out the child's
output.
- AIR: the runtime forgets the configuration of an ended child.
## Validation
- `npm run build`, `npm run check`
- `npm run test:run`, two runs: 3321 passed, 30 skipped.
- `src/tests/acp-scenarios.test.ts`, 30 runs in 6 parallel workers: no
failure.
- New tests: the load end event before the CLI start, with and without
subagents (both fail on `main`); the post-load refinement of an ended
child; the buffer; the cleanup; the memo after a list change.
- Microbenchmark of 10,000 child responses over 200 children, with 51
models:
| | before | after |
|---|---|---|
| `modelEntryFor`, last entry | 12.16 µs | 0.23 µs |
| `modelEntryFor`, no match | 64.60 µs | 0.08 µs |
| `reportModel`, AIR | 13.66 µs | 4.03 µs |
| `reportModel`, RFD | 12.80 µs | 3.23 µs |
## Related
- Follow-up to
https://github.com/agentclientprotocol/claude-agent-acp/pull/1432
- RFD change:
https://github.com/agentclientprotocol/agent-client-protocol/pull/2482
- JetBrains issue:
[IJAI-4754](https://youtrack.jetbrains.com/issue/IJAI-4754)
## Summary
A native subagent child session gets its model only from what the child
reports. The update is a `config_option_update` with the child's session
id and a single `model` select option. This follows the subagents RFD,
[Child
configuration](https://github.com/agentclientprotocol/agent-client-protocol/blob/main/docs/rfds/subagents.mdx#child-configuration)
(see also agentclientprotocol/agent-client-protocol#2482).
## Relation to #1417#1417 reports a child's model from its responses, in the `rfd` form
only, with the raw model id as the name. This PR keeps that source and
extends it:
- The `air` form gets the same update.
- History replay sends each child's model from its transcript.
- The value maps to an entry of the root session's `model` option, so a
client can compare the child's model with the session's.
There is no model at spawn. The adapter cannot tell the model that
Claude Code picks for a new child, for example with
`CLAUDE_CODE_SUBAGENT_MODEL_FORCE`, or when an alias runs on the
parent's exact model. So the first update comes with the child's first
real response (`message.model`, not `<synthetic>`). A new update goes
only when the entry changes.
The configuration hooks of #1417 (`PostModelSwitch` and the others) now
also run for `air` clients. A hook names the SDK agent id, so in the
`air` form its options go to the agent's current generation session
(`<agent id>:generation:<n>`). In the `air` form, no configuration goes
after a child's end.
## Notification
```json
{
"sessionId": "<child session id>",
"update": {
"sessionUpdate": "config_option_update",
"configOptions": [{
"id": "model", "name": "Model", "category": "model", "type": "select",
"currentValue": "opus[1m]",
"options": [{ "value": "opus[1m]", "name": "Opus 4.6 (1M context)" }]
}]
}
}
```
- The client cannot change a child's configuration, so the select offers
only the current value.
- No field is added to `subagent_spawned` or `subagent_update`.
## Matching a model id to an entry
Best first:
1. the root session's current entry, when it runs the same model up to a
context hint, such as `opus[1m]` or `default` for `claude-opus-4-6`;
2. the listed entry whose value or resolved model is the id;
3. a listed entry that runs the same model up to a context hint.
When several entries run the model, a concrete entry comes before
`default`, unless `default` is the current entry. A model id is compared
as it is, so a dated or provider id (`claude-haiku-4-5-20251001`,
`eu.anthropic.claude-sonnet-5`) matches only the same id:
`ModelInfo.resolvedModel` is the wire id that a response reports. A
model that matches no entry goes as its full id, with its display name
when the session's model list has one. A `PostModelSwitch` hook of a
child uses the same matching.
## Replay
- A child without responses in its transcript gets no model.
- `rfd` form: the replay sends a child's model right after its
announcement, from its first response, and again when a later response
changes it. During a load, the session's model list can be unknown, so
the replay can send the full id. After the load response, a child's
model goes again only when the list maps it to another entry.
- `air` form: the replay ends every child, and nothing may follow the
end. So each child's latest response model goes once the session
creation ended, just before the child's end, as the entry of the
session's model list.
## Validation
- `npm run build`
- `npm run check`
- `npm run test:run`, three runs: 3315 passed, 30 skipped.
- `src/tests/acp-scenarios.test.ts`, 30 runs in 6 parallel workers: no
failure.
New tests cover:
- no model before the child's first response, in both forms;
- an update only when the entry changes;
- no update to an ended `air` child, also with an update in flight at
the end;
- a hook's options under the current `air` generation;
- matching for `opus[1m]` and `default`, concrete entries before
`default`, listed entries, dated and provider ids, and unlisted ids;
- the `PostModelSwitch` entry, in both forms;
- an `air` load replay that maps a child's model only once the session
exists;
- `rfd` replay with an unlisted full id, and no duplicate update after
the load response.
The scenario snapshots for both forms and v2 are updated.
In the subagents RFD form, a `SendMessage` call to a child now becomes a
message between the two sessions, as a launch's prompt already does
(#1405). Before, it was a tool call of its sender plus an unlinked
message in the child. Every delegation now has a parent-side message,
which a client can anchor a per-delegation card on, and both views name
each other with `senderMessageId`/`recipientMessageId`.
## Live
- The call is held until its final update. The SDK reports that the
message resumed a child before it reports the call's result.
- **Message reached an announced child:** the sender gets the outgoing
view and the child the incoming one (`linkedSessionMessages`). The
call's result isn't shown.
- **Message reached no announced child**, for example one sent to the
parent: the call is shown after all, with its final status
(`unexposedControlFallback`).
- **Call a permission request already showed:** it keeps its updates,
and its message goes only to the child.
## Replay
- A child's history replays right after its launch, so a call from a
parent to its child is always matched to its delivery first.
- The child's view then names the call, and the sender's view goes out
where the call sits.
- A call the replay reaches before its delivery stays a tool call,
unlinked. That can happen with a child's message to a sibling whose
history replays later.
`publishPrompt`'s `replacesLaunch` option is now `replacesCall`.
## Testing
- **Live:** the existing `SendMessage` tests in
`native-subagents.test.ts` and `acp-agent.test.ts` now expect both views
and check that the call and its completed result are hidden. A new test
checks that a call reaching no announced child is shown with its final
status.
- **Replay:** the existing test expects the linked views in place of
`root tool_call toolu_send`. A new test covers a call reached before its
delivery, and fails if delivery ignores that the call was already shown.
- `npm run check`, `npm run build` and `npm run test:run` (3301 tests)
pass locally.
Not tried against a real Claude Code run yet.
The subagents RFD makes the response to a load (v1 `session/load`, v2
`session/resume` with replay) the freshness boundary. Work states and
`cancel` grants sent before it are history, and "current snapshots are
sent after the response". The adapter sent each replayed child's end
only during the replay, so a client that follows the RFD strictly showed
every child as unknown after a reload. This replaces the RFD carve-out
proposed in agentclientprotocol/agent-client-protocol#2475.
After the response, each replayed child now gets one current
`subagent_update`:
- **A child still running in this process**, as when a live session is
loaded again, reports its live state and `capabilities.cancel`, as it
did live.
- **Any other child** can't be running, because the process that ran it
is gone. Its replayed end becomes its current state, with no grant.
When it's sent:
- **v1:** with the commands, in the timer that follows the setup
response (`afterSetupResponse`).
- **v2:** the surface sends it only once its own resume response is out,
after `setupCommands`. A timer set inside `loadSession` could fire
before that response.
`RfdSubagentReplay.finish` and the new `currentStates` share one
`endState`. `NativeSubagentRuntime.liveWorkState` exposes the live
state.
## Testing
- `sends each child's current state after the load response`: a live
child and a finished one, after the replay and its response.
- `replays a subagent's history to its own session…` (v2) now records
when the client receives the response. It checks that the child's
current `state_update` arrives after it, and that the parent's copy
grants nothing. It fails without the v2 change.
- `npm run check`, `npm run build` and `npm run test:run` (3300 tests)
pass locally.
Not tested end to end: the v1 timer path. It reuses the timer that
already sends v1 commands after the setup response.
## Summary
Expose the observed configuration of RFD subagent sessions using the
same config-option IDs as ordinary sessions, without granting
client-initiated configuration changes.
- Report model from child responses and model-switch hooks, and mode,
applied reasoning effort, and agent type from child-attributed SDK
hooks.
- Merge partial observations into complete, ordered config snapshots;
buffer early observations until truthful child announcement and
serialize concurrent publications.
- Advertise only each observed current value. Do not inherit parent
settings or invent child Fast-mode state.
- Keep child plan-mode and model-switch hooks from changing the parent's
configuration.
- Cover initial/changed settings, announcement ordering, publication
failures, root isolation, and hook registration in both protocol
versions; update v2 scenario snapshots.
## Related
Protocol clarification:
https://github.com/agentclientprotocol/agent-client-protocol/pull/2468
Zed client implementation:
https://github.com/zed-industries/zed/pull/66058
## Validation
Passed after rebasing onto current `main`:
- `npm run build`
- `npm run check`
- `npm run test:run -- --silent`: 3,294 passed, 30 skipped.
No live Claude-to-Zed smoke test was run. Settings are reported only
when observed from the SDK; availability depends on runtime support and
events received.
Removes `ts-node` 10.9.2 from devDependencies. Nothing in the repo uses
it: no script, config or test references it. `npm run build` uses `tsc`,
tests run through vitest, and `npm run example:simple-client` uses `node
--experimental-strip-types`.
Verified: `npm run build`, `npm run check`, `npm run test:run`.
Updates `@anthropic-ai/claude-agent-sdk` from 0.3.303 to **0.3.309**
(Claude Code **2.1.309**), `@agentclientprotocol/sdk` 2.0.0 → 2.0.1,
`@anthropic-ai/sdk` 0.135.0 → 1.1.0 and typescript-eslint 8.71.2 →
8.72.0.
TypeScript stays on 6.0.3. typescript-eslint requires `typescript
<6.1.0` and has no TS 7 support yet
(typescript-eslint/typescript-eslint#10940), so we wait for that rather
than running two TypeScript versions side by side.
## Uses new SDK features
- **`/usage` recommendations (0.3.305):** our structured `/usage`
Markdown now lists Claude Code's per-window suggestions (`- **41%**
Disable my_server · /mcp`) above the MCP server table, in the order
Claude Code sends them. `fix` is not rendered: its messages must be
queued at priority `later` with `client_composed` set, which an ACP
prompt cannot express. A malformed recommendation makes the response
fail validation, so we fall back to Claude Code's own `/usage` text.
- **`wakeup_source` on `command_lifecycle` "started" (0.3.307):** when a
ScheduleWakeup or another scheduled task starts a turn with no prompt
open, the async-task (AIR) "Claude is working" task now says `A
scheduled wakeup fired (set for <UTC time>).` or `A scheduled task
fired.` instead of `Claude Code started a turn without a prompt.` It
works whether the frame arrives before or after `session_state_changed:
running`; older CLIs and unknown values behave as before.
## Fixes for changes in the new CLI
- **Fork transcripts (2.1.307):** the placeholder `tool_result` text in
a fork's copied prefix changed (`Fork started — that fork is you.` /
`This is the parent's call, not yours. …`). `stripForkPrefix` matches
only the directive text, so behaviour is unchanged; its doc comment and
the replay fixture now describe both formats.
## Behaviour changes ACP users may notice
- **2.1.304:** tool search is on by default behind a custom
`ANTHROPIC_BASE_URL` (our `providers/set` gateway sessions), and a
gateway that rejects it is retried without it (2.1.305).
- **2.1.304:** `rm -r` of a mounted drive or a top-level folder on it
(`/Volumes/…`, `/media/…`, `/mnt/c/…`) now asks for permission, even in
bypass mode, without an always-allow option.
`CLAUDE_CODE_DISABLE_MOUNTED_DRIVE_RM_PROMPT` turns it off.
- **2.1.309:** with `sandbox.enabled` but no runnable sandbox, commands
in `sandbox.excludedCommands` now ask before writing to the sandbox's
write-list paths, and the unsandboxed fallback is refused.
- **2.1.304:** `allowedMcpServers` no longer filters `managed-mcp.json`
stdio servers that use `${VAR}` only in `env`.
## Upstream fixes this picks up
- Model switches, prompts and interrupts no longer wait behind our
background `getContextUsage` call (2.1.304); `setModel()` waits up to 15
s for the API to confirm a model (2.1.307).
- A PreToolUse hook's deny reason is no longer replaced by a timeout of
our `Edit|Write` preview callback hook (2.1.304).
- Host-supplied `managedSettings` no longer drop `disableAllHooks`,
`disableSkillShellExecution` and empty HTTP hook lists (0.3.309).
- Gateway fixes: `context_management` rejections are retried without the
field (2.1.304); no `prompt-caching-scope` header behind custom gateways
(2.1.307).
- A disabled MCP server is no longer reconnected by a later permission
prompt in SDK sessions; HTTP MCP tool calls are no longer sent twice
when the connection drops (2.1.307/2.1.309).
- Bash permission and sandbox hardening (2.1.309), fewer "prompt is too
long" and autocompact-thrashing errors, and faster resume of large
compacted sessions.
## Checked, no change needed
- **ACP SDK 2.0.1** only changes the client-side `createHttpStream`
transport, which we don't use.
- **`@anthropic-ai/sdk` 1.x** (API version 2026-10-21, Bearer auth,
sampling params removed): we only use its types, none of which changed
in a way that affects us. Neither our `dist/` nor the Agent SDK runtime
imports it, and the bundled CLI carries its own client. It is Apache-2.0
from 1.0.0 (previously MIT).
- **`sed -i` (2.1.309)** runs as plain Bash; SDK sessions already did,
since `_simulatedSedEdit` only exists in the TUI preview.
- The remaining type changes (`liveReply`, context-usage row `id`s,
`pluginId`/`path` on agents and skills, new settings keys) are additive
and unused.
Verified: `npm run build`, `npm run check`, `npm run test:run` (3277
passed, 30 skipped), and a typecheck of `examples/`.
Bumps [fast-uri](https://github.com/fastify/fast-uri) from 3.1.8 to
3.1.9.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/fastify/fast-uri/releases">fast-uri's
releases</a>.</em></p>
<blockquote>
<h2>v3.1.9</h2>
<h2>Security</h2>
<p>This security release fixes four URI parsing and normalization
vulnerabilities in fast-uri 3.x. Applications that process untrusted URI
input should upgrade to v3.1.9.</p>
<ul>
<li><strong>Medium — URI scheme spoofing through percent-encoded
schemes</strong> (<a
href="https://github.com/fastify/fast-uri/security/advisories/GHSA-w74x-v6f9-j3xg">GHSA-w74x-v6f9-j3xg</a>,
CVE-2026-110306): percent-encoded scheme input is now rejected instead
of being decoded into a live scheme.</li>
<li><strong>Medium — Host confusion during domain-host
canonicalization</strong> (<a
href="https://github.com/fastify/fast-uri/security/advisories/GHSA-wjr9-j795-jxcr">GHSA-wjr9-j795-jxcr</a>,
CVE-2026-110180): malformed domain hosts containing ambiguous delimiters
or stripped control characters are now rejected instead of being
silently rewritten.</li>
<li><strong>Low — Incorrect relative-reference normalization</strong>
(<a
href="https://github.com/fastify/fast-uri/security/advisories/GHSA-xhq7-xmqj-769h">GHSA-xhq7-xmqj-769h</a>,
CVE-2026-110095): dot-segment removal now preserves the resolution
semantics of relative references.</li>
<li><strong>Low — Scheme injection in suffix references</strong> (<a
href="https://github.com/fastify/fast-uri/security/advisories/GHSA-333x-w4r6-6crp">GHSA-333x-w4r6-6crp</a>,
CVE-2026-110725): first-segment colons in path-only suffix references
are now escaped so the output is not reparsed as a scheme.</li>
</ul>
<p>Upgrade with:</p>
<pre lang="sh"><code>npm install fast-uri@3.1.9
</code></pre>
<p>Thanks to <a href="https://github.com/zekth"><code>@zekth</code></a>
for reporting the scheme, host, and relative-reference issues, and to <a
href="https://github.com/UlisesGascon"><code>@UlisesGascon</code></a>
for finding the suffix-reference issue and reviewing the
remediations.</p>
<h2>What's Changed</h2>
<ul>
<li>ci: enable trusted publishing releases (v3.x) by <a
href="https://github.com/mcollina"><code>@mcollina</code></a> in <a
href="https://redirect.github.com/fastify/fast-uri/pull/229">fastify/fast-uri#229</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/fastify/fast-uri/compare/v3.1.8...v3.1.9">https://github.com/fastify/fast-uri/compare/v3.1.8...v3.1.9</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="0def70338a"><code>0def703</code></a>
Bumped v3.1.9</li>
<li><a
href="a1d0da2f5c"><code>a1d0da2</code></a>
test: generate only relative path references</li>
<li><a
href="9eb8759a98"><code>9eb8759</code></a>
fix: preserve relative paths in suffix and relative resolution</li>
<li><a
href="54c30f7589"><code>54c30f7</code></a>
docs: note suffix-reference authority ambiguity</li>
<li><a
href="39e6493c13"><code>39e6493</code></a>
fix: escape a first-segment colon in suffix references</li>
<li><a
href="745183c1d9"><code>745183c</code></a>
test: cover first-segment colon in suffix references</li>
<li><a
href="ddfc6a5112"><code>ddfc6a5</code></a>
fix(SEC-03): reject non reg-name characters in domain hosts</li>
<li><a
href="d86a8d29f4"><code>d86a8d2</code></a>
fix: keep a colon-first segment behind "./" in relative
normalization</li>
<li><a
href="eb483b5da2"><code>eb483b5</code></a>
test: cover colon-first relative references in normalization</li>
<li><a
href="b110a3571c"><code>b110a35</code></a>
fix(SEC-02): preserve meaning of relative references during
normalization</li>
<li>Additional commits viewable in <a
href="https://github.com/fastify/fast-uri/compare/v3.1.8...v3.1.9">compare
view</a></li>
</ul>
</details>
<details>
<summary>Maintainer changes</summary>
<p>This version was pushed to npm by <a
href="https://www.npmjs.com/~GitHub%20Actions">GitHub Actions</a>, a new
releaser for fast-uri since your current version.</p>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
## Summary
For a client on the subagents RFD (every ACP v2 client, and v1 clients
that declare `subagents`), session messages now replace the Agent/Task
call that launches a child. The parent no longer sees that tool call.
AIR's form is unchanged.
- **Prompt.** The launch's prompt is a `session_message` in both
transcripts: the parent's outgoing view and the child's incoming one.
Both use the launch's tool use id, and each names the other with
`recipientMessageId` / `senderMessageId` from
agentclientprotocol/agent-client-protocol#2465.
- **Answer.** A foreground child's answer, from the launch's result, is
the child's `session_message` to the parent (`<launch id>:reply`). It
uses the result as `AgentReporter` renders it, so the model-facing
`agentId: …` line and `<usage>` block are gone. A failure or
cancellation comes from the child's `idle` stop reason, which it already
reported. A background launch's result gets no reply.
- **Hand-back mode.** Claude Code (seen with 2.1.303) can have the child
hand its report back with a `SubagentHandback` call; the Agent result
then only says that the report "was delivered to you as a message". That
call is reported as the child's message to the parent, in both
transcripts and linked the same way, and the launch's reply is skipped
for that run. A failed hand-back delivered nothing, so it stays a tool
call of the child.
- **Unexposed work.** A launch whose child is never exposed is shown as
a tool call after all, with its final status
(`unexposedControlFallback`, the former `failedControlFallback`).
- **Hidden launches by id.** The adapter's own report that closes an
unfinished call (for example at a forced cancel) carries no `toolName`,
so the runtime tracks hidden launches by id to keep that report from
reaching the client for a call it never saw.
- **Replay** sends the same messages from the child's transcript: the
launch's prompt, the reply, and hand-backs. A launch without Claude
Code's metadata file keeps its tool call and the missing-history notice.
Replay can't tell a child's runs apart, so any hand-back in its
transcript suppresses its launch's reply.
- **SendMessage** calls stay tool calls of their sender, and the child
gets the incoming view without references, as before.
- README's subagent section describes the new behavior.
Do not merge before agentclientprotocol/agent-client-protocol#2465
settles the field names: a merge to `main` publishes a preview right
away. Clients on the published schema ignore the two fields (no
`deny_unknown_fields` in the Rust schema; the scenario validation with
the SDK's zod schema passes).
## Testing
- `npm run build`, `npm run check` and `npm run test:run` pass (57
files, 4 skipped as before).
- The six v2 `subagent-*.jsonl` scenario snapshots changed: the launch's
tool-call updates are gone, the parent gets the outgoing view, the
child's view carries `senderMessageId`, and foreground results became
`:reply` messages. AIR snapshots are unchanged.
- New unit tests cover hidden launches, nested launches, replies, failed
and background launches, unexposed launches with both final statuses,
the close report without a tool name, and hand-back success and failure,
live and on replay.
- A real run: the built adapter driven over v2 stdio with Claude Code,
one foreground subagent asked to answer PONG, then `session/resume` with
replay in a fresh process. Live and replay both showed the linked prompt
(parent → child), the linked hand-back "PONG" (child → parent), and no
Agent tool call.
## Summary
Session titles showed up only after the first turn ended. With
background subagents, that could be minutes or hours later. Now the
adapter asks for the title when the prompt is sent to the CLI. In a live
run the title arrived **0.8s** after the prompt, compared with **17.9s**
(at turn end) on `main`.
## Why
- **The CLI already titles SDK sessions.** The bundled CLI (2.1.303)
titles a new session from its first prompt within seconds and stores it
as an `ai-title` transcript entry. `getSessionInfo` returns it as
`customTitle`. The header comment in `session-titles.ts` said the CLI
never titles SDK sessions; that is out of date. The CLI's off switch
only applies to the `sdk-cli` entrypoint without
`CLAUDE_AGENT_SDK_VERSION`, and the TS SDK sets `sdk-ts` and that
variable.
- **No message carries an AI title.** The CLI's internal
`system/session_title_changed` covers only `/rename`-style names, and
its schema says so.
- **The adapter only checked at `idle`.** `SessionTitles.onTurnEnd` ran
at `session_state_changed: idle`, which comes after the whole turn.
Since CLI 2.1.270 it also waits for background subagents to finish. In
the common case, `onTurnEnd` just picked up the title that had been on
disk for the whole turn.
## Change
- **New `SessionTitles.onPromptQueued`**, called right after the prompt
is pushed to the SDK. Until the session has a title, it:
1. reads the session file, and publishes a stored title if there is one
(a resumed session, or a `/rename`);
2. otherwise sends `generate_session_title` with the prompt text only,
in the background, and publishes the result.
- **No second model call.** The CLI runs this request alongside the turn
instead of queuing it behind it. Its handler returns the stored custom
title, then the AI title, and otherwise waits for the CLI's own title
call already in flight.
- **One try per prompt, like the CLI.** After a prompt-time request, the
turn end does not ask again. If nothing came back, it publishes the
stored summary as before, and the next prompt tries again.
- **Unchanged:**
- the turn end still titles a prompt too short to title from (under 10
characters, like "hi") from the prompt plus the reply;
- the turn end still picks up a later `/rename`;
- a title the client set still wins.
## Verification
- `npm run check` and `npm run test:run` pass (3275 passed, 30 skipped).
- New tests:
- the title is published while the first turn is still running;
- the raw prompt is not published at turn end while a title is still
pending;
- a short "hi" prompt is titled at turn end from the prompt and the
reply.
- The latch-release test now pins one request per prompt. Removing the
new call site makes two of the tests fail.
- Live check: one real text-only turn against this branch and against
`main`, both on the bundled CLI 2.1.303, timing `session_info_update`
against the prompt response:
| build | title published | prompt response |
| --- | --- | --- |
| this branch | 0.8s | 17.1s |
| `main` | 17.9s | 17.9s |
Both runs got the same title, and both transcripts contain the same two
`ai-title` entries. So the change adds no title generation; the CLI
itself writes the entry twice.
## Risks
- **Undocumented CLI behaviour.** This depends on the CLI answering
`generate_session_title` mid-turn and returning the title it is already
generating, which `sdk.d.ts` does not document. If a future CLI changes
that, the worst case is one extra small-model call per session. The
latch still limits it to one success.
- **Titles now arrive mid-turn.** Clients that expected
`session_info_update` only between turns should be checked.
- **Steering is not covered.** Messages injected with
`_session/steering` don't trigger a title request.
## Summary
- Enable `check-latest: true` for all three Node setup steps: CI, stable
publishing and preview publishing.
- Preserve the existing `lts/*` policy, action pins, npm settings,
package version and `engines.node` requirement.
## Why
The latest sampled
[CI](https://github.com/agentclientprotocol/claude-agent-acp/actions/runs/39865544394)
and [preview
publishing](https://github.com/agentclientprotocol/claude-agent-acp/actions/runs/39865544489)
runs both selected cached Node **24.21.0**. That predates **24.22.1**,
the fixed Node 24 release for the [October 21 security
updates](https://nodejs.org/en/blog/vulnerability/october-2026-security-releases),
including CVE-2026-111497.
## Validation
The same checks passed before and after:
- Baseline on local Node **24.22.0**: `npm ci && npm run check && npm
run build && npm run test:run`.
- After on official Node **24.22.1** (archive SHA-256 verified): `npm ci
&& npm run check && npm run build && npm run test:run`.
- Both runs: **3,272 passed, 30 skipped**; the skipped/integration
coverage remains unverified.
- Parsed workflow configuration to verify all three setup steps keep
`lts/*` and enable `check-latest`.
- Tests ran natively on macOS; GitHub runner selection remains to be
confirmed by PR CI. No publish or release commands were run.
## Risk / rollout
Low-risk CI-only runtime freshness change. Verify the next
CI/stable/preview job's setup-node log resolves at least **24.22.1** for
Node 24. Reverting restores cache-first selection, which can restore an
unpatched runtime; it is not a mitigation.
This patches the build/publishing environment, not end users' separately
installed Node runtimes. No application-code or release-version changes
are included.
## What
This PR adds the AIR client capability `backgroundSubagents`. A client
declares it in
`initialize.clientCapabilities._meta.jetbrains.air.capabilities`.
With the capability, an ACP v1 prompt turn ends at its result. This is
also true while background subagents of the turn still run, including a
subagent that SendMessage resumed. Subagent updates, permission requests
and elicitations then go out after the prompt response. Their routing
does not change. The agent advertises the capability only to ACP v1 AIR
clients.
## Why
The hold of #864/#866 keeps `session/prompt` open until the subagents
finish. The Claude CLI ends the model turn at `result`, and only `idle`
waits for the background agents. In AIR the hold hides the end of the
answer, and the next user message steers into an old turn. One
SendMessage-resumed subagent kept a turn open for about two hours.
## Unchanged
- A client without the capability keeps the hold exactly. So #866 stays
fixed for clients that stop listening at the prompt response.
- ACP v2 keeps the hold too.
## Related changes
- Out of a turn, the ExitPlanMode request of such a client does not
offer the clear-context option. The fresh query must continue an ACP
turn, and there is none.
- An ExitPlanMode interruption of an autonomous cycle with no held turn
now clears its markers.
## Docs
`docs/air-extensions.md` has a new "Background subagents" section.
## Tests
New capability cases:
- a fresh subagent;
- a SendMessage-resumed subagent;
- a permission request after the prompt response, with the
`parentToolUseId` attribution;
- an autonomous followup that does not end the queued next prompt;
- ExitPlanMode out of a turn, with and without a reset;
- the exclusion of a running subagent from the incomplete-tool check.
The existing tests cover the path without the capability. When the gate
is disabled, 7 of the 8 new cases fail. The eighth is the in-turn
control case and passes in both configurations.
`npm run build`, `npm run check` and `npm run test:run` pass. The
exception is 4 `providers.test.ts` cases. They depend on the environment
(a local proxy `baseUrl`) and fail on `main` too.
Bumps the minor group with 1 update:
[postcss](https://github.com/postcss/postcss).
Updates `postcss` from 8.5.30 to 8.5.31
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/postcss/postcss/releases">postcss's
releases</a>.</em></p>
<blockquote>
<h2>8.5.31</h2>
<ul>
<li>Fix better source map on <code></style></code> escaping (by <a
href="https://github.com/firefoxic"><code>@firefoxic</code></a>).</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/postcss/postcss/blob/main/CHANGELOG.md">postcss's
changelog</a>.</em></p>
<blockquote>
<h2>8.5.31</h2>
<ul>
<li>Fix better source map on <code></style></code> escaping (by <a
href="https://github.com/firefoxic"><code>@firefoxic</code></a>).</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d1908579d6"><code>d190857</code></a>
Release 8.5.31 version</li>
<li><a
href="4ef6d8cc03"><code>4ef6d8c</code></a>
Update dependencies</li>
<li><a
href="6abd674231"><code>6abd674</code></a>
Call the builder with every node when the output is escaped (<a
href="https://redirect.github.com/postcss/postcss/issues/2175">#2175</a>)</li>
<li>See full diff in <a
href="https://github.com/postcss/postcss/compare/8.5.30...8.5.31">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
A message typed in claude.ai or the Claude mobile app while Remote
Control is on never appeared in the client that hosts the session, even
though Claude's reply to it did. This makes both sides of that
conversation show up.
Two causes, one commit each:
- **Messages from other clients were dropped.** Claude Code echoes them
to the adapter as a replayed user message with `origin: { kind: "human"
}` and a uuid the adapter never created. That matched no turn, so it
fell into the "unrelated replay" branch and was ignored. Human-origin,
top-level, non-synthetic messages that match no turn are now forwarded
as `user_message_chunk` (mapped to `user_message` on ACP v2). The echoes
of the adapter's own prompts still match their turn first and stay out
of the feed.
- **The stream reader was not running after `/remote-control`.** The
reader that forwards Claude Code's output starts with the first prompt,
and `/remote-control` answers without a turn. In a thread where it was
the first thing run, nothing read the stream, so neither the phone's
message nor Claude's reply reached the client. The command now starts
the reader. This also fixes the reply side for #1197.
## Testing
- `npm run check`, `npm run build` and `npm run test:run` pass, with new
tests in `remote-user-messages.test.ts` and `remote-control.test.ts`.
The tests for both fixes fail without them.
- Ran the built adapter as a custom agent in Zed: after
`/remote-control`, a message sent from the Claude iOS app showed up in
the Zed thread along with Claude's reply.
- Not tested: messages with images or attachments, and whether resuming
a session can replay old human messages through the same path.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
## Summary
A Claude Code session can start a background shell command or a
background sub-agent, and then end its turn. When a task ends, Claude
Code wakes the session for a short turn. The session index reported
`idle` at each turn end, so a client saw one completion for each task.
Now the index finds the open background tasks in the transcript. A turn
end with an open task stays `running`, also after 10 minutes. The
session gets one `idle`, when the last task ends. The rules are the same
as in the native Claude provider of AIR (IJAI-3744).
## Rules
- A task opens with a tool result that has `backgroundTaskId`, or
`isAsync` with an `agentId`.
- A task closes with its `<task-notification>` (a user record or a queue
`remove`), or with a `TaskStop` result.
- The wait ends when no live process holds the session, or when the
registry status is `idle`.
- A task can start before the tail window. A later scan applies the tail
on top of the earlier task set. When it cannot, the index reads the
whole transcript, but only for a finished turn of a live session.
## Not in this PR
- A background task that a sub-agent starts. Its start record is only in
the transcript of the sub-agent.
- A session that this connection runs. Its state comes from the SDK.
## Tests
- `background-tasks.test.ts`: the record orders of the native provider
tests, in a small transcript and in one longer than the tail window. The
tests also cover a task before the tail window, the end of the wait, and
the count of whole-file reads.
- A real check with Claude Code 2.1.306 in a terminal. With two
background shells or two background sub-agents, `main` gave three `idle`
and this change gave one.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
## Summary
The draft ACP v2 is no longer opt-in. The adapter always connects
through the SDK's protocol router (as codex-acp does), so a client that
asks for protocol version 2 or later in `initialize` gets v2, and every
other client gets v1 as before. v2 is still experimental and follows the
draft as it changes.
- Removes `CLAUDE_AGENT_ACP_EXPERIMENTAL_V2`, which only turned on what
is now the default.
- Adds `CLAUDE_AGENT_ACP_PROTOCOL` to limit the adapter to one version:
- unset, empty, or `auto`: both, picked by the client's `initialize`.
- `v1`: a client that asks for v2 is negotiated down to v1. This is the
escape hatch if a client's v2 handling breaks.
- `v2`: a v1 client's `initialize` is rejected with `-32022 Unsupported
protocol version`.
- Any other value fails at startup, so a typo like
`CLAUDE_AGENT_ACP_PROTOCOL=1` doesn't silently serve both.
- Fixes the comment in `src/acp-subagents.ts` that said v2 clients don't
get subagents.
Note: a client that already sends `protocolVersion >= 2` switches to the
v2 surface as soon as this lands on `main`, which publishes a preview.
## Testing
- New routing tests: down-negotiation to v1, rejecting v1 when limited
to v2, env parsing.
- `npm run check`, `npm run build`, `npm run test:run` pass.
- Ran the built binary over stdio with each setting: default → v2 for a
v2 client, `v1` → protocol version 1, `v2` → `-32022` for a v1 client,
invalid value → exits with an error at startup.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
## Motivation
Claude Code can start a turn of its own after a prompt has ended, for
example to answer the notification of a finished background task. ACP v1
has no session state, and the client already got `end_turn` for its last
prompt. The output of that turn just keeps arriving as session updates,
and the client has no signal that the agent is working again, or when it
stops.
## Change
The adapter now publishes such a turn as an async task (AIR async tasks
extension) with the id `autonomous-turn-<uuid>`, the name `Claude is
working`, `taskType: "turn"` and `showInTranscript: false`. Its
description is the summary of the last task notification, when there is
one.
- **Start:** the SDK moves to `running` while no prompt is active or
queued. From CLI 2.1.270 the state stays `running` while background
agents run, so the task also starts at the first root output with no
prompt open.
- **End:** the task ends `completed` at the turn's result or at `idle`,
and `failed` at an error result. A coalesced placeholder result
(`num_turns: 0`) does not end it.
- **Folded prompt:** a prompt that the turn takes in ends the task,
because that prompt owns the turn now.
- **Stop:** `_session/async_task/stop` on this task interrupts the turn,
since the SDK has no task to stop. It returns `{ "stopped": false }`
while a prompt waits for its turn, because the interrupt would drop that
prompt.
- **Lifecycle:** the SDK task list does not end the task, because the
SDK does not know about it. Shutdown fails it like other open tasks.
Clients without the async tasks capability get nothing new. The behavior
is documented in `docs/air-extensions.md` under "Autonomous turn".
## Tests
`acp-agent.test.ts` covers the start at `running` and at the first
output, the end at the result, the folded prompt, stop as an interrupt,
and a client without async tasks. `async-tasks.test.ts` covers the SDK
task list reconciliation and shutdown.
Updates `@anthropic-ai/claude-agent-sdk` from 0.3.300 to **0.3.303**
(Claude Code **2.1.303**), along with dependabot's minor-group bumps
(`@anthropic-ai/sdk`, eslint, vitest and transitive packages). 0.3.304
is only on the `next` dist-tag, so it is not included.
## Fixes for changes in the new SDK
The Agent SDK turns on fork subagents (`subagent_type: "fork"`) by
default in SDK sessions (0.3.302). Before this, ACP sessions never got
them. Live streaming already handles forks. History replay did not:
- **Replay showed the parent's launching message inside the fork.** A
fork's transcript starts with a copy of the parent's launching assistant
message (with the same API message id and every `tool_use`), then a user
message with a `"Fork started — processing in background"` result per
`tool_use` and a `<fork-boilerplate>…Your directive: <prompt>` text. On
`session/load`, the parent's text, tool calls and those results appeared
in the fork, and the fork's prompt showed the full boilerplate.
Replaying the copy also consumed the parent's tool-use cache entries, so
the parent's real Agent/parallel tool results were dropped. In the AIR
form, sibling forks were re-registered under the fork.
`readSubagentMessages` now drops everything before the directive message
and reduces it to the prompt (`stripForkPrefix`).
- **Lineage scan** (`subagentLineage`) ignores launch calls in a fork's
copied prefix, so it no longer attributes the parent's launches to the
fork.
- **Agent title** no longer shows `(high effort)` for a fork: a fork
ignores `effort` and runs at the parent's effort.
## Changelog review: nothing else to change
- **0.3.302: an omitted `permissionMode` now starts in `default` on
third-party providers.** The agent always passes `permissionMode`
explicitly, so this does not apply.
- **0.3.301: a full-disk login refresh now reports `invalid_request`
instead of `authentication_failed`/401.** This now maps to `bad_request`
rather than `auth_required`. That's the right outcome, since `/login`
cannot fix a full disk. Its text has no "Please run /login", so the
synthetic-login check does not catch it.
- **0.3.301: `setModel()` no longer fails at the usage limit.** This is
a free fix for model switches.
- **0.3.302: structured output refusals are now error results.** These
are covered by the existing result handling.
- **New APIs not adopted:**
- Per-tool `permission_policy` on sdk MCP servers: we register none.
- `reloadPlugins({ addPlugins })`: there's no plugin reload surface.
- `BUILTIN_TOOL_NAMES`/`LEGACY_TOOL_NAME_ALIASES`: `@alpha`, and nothing
here needs them.
- MCP `_meta.ui`: unused.
Verified: `npm run build`, `npm run check`, `npm run test:run` (3205
passed). New tests cover the fork replay trace (RFD form),
`stripForkPrefix`, the lineage scan with a fork transcript (it fails
without the fix), and the fork title.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Updates `@agentclientprotocol/sdk` from 1.9.0 to 2.0.0.
SDK 2.0.0 makes the default entrypoints stable-only and removes the
legacy connection classes ([migration
guide](https://github.com/agentclientprotocol/typescript-sdk/blob/main/MIGRATION_STABLE_UNSTABLE.md)).
- Protocol imports move to `@agentclientprotocol/sdk/unstable` and
`@agentclientprotocol/sdk/experimental/v2/unstable`. The agent uses
unstable features (session forking, `systemPrompt`, turn usage,
subagents, v2 draft extras), so this keeps the same protocol surface as
1.9.0. No wire changes.
- The scenario schema validator loads `schema/v1/schema.unstable.json`,
because the unversioned `schema/schema.json` export was removed.
- `remote-control.test.ts` uses the repo's own `AcpClient` type instead
of the removed `AgentSideConnection`.
- Runtime code already used the `agent()` app API, so it needed no
migration.
Verified: `npm run build`, `npm run test:run` (3199 passed), `npm run
check`, and a separate typecheck of `examples/`.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`main` has failed CI since #1361, on one test: `ACP v2 prompts > ends a
resume with replay with one end event for a client with loadReplayEnd`.
Two PRs that merged separately collided:
- #1366 made a v2 resume send a `state_update` snapshot after the replay
and before the response ("v2 requires a snapshot of the foreground state
after the replay", in `src/v2/agent.ts`).
- #1361 added the `loadReplayEnd` end event and this test, which
expected the end event to be the last update of the response. The test
predates the snapshot, so each PR passed CI on its own.
The snapshot is required by the v2 spec, so the code is right and the
test is stale. The test now expects the end event followed by the
snapshot, and still checks that the end event is sent once. Only
`src/tests/acp-v2.test.ts` changes.
## Testing
- `npm run check`, `npm run build` and `npm run test:run` pass (3199
passed, 30 skipped).
- The same test fails on `main` at `bcf74c2` without this change.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
The model picker was empty behind OpenRouter: `normalizeModelId` did not
match `anthropic/claude-opus-5.5:batch[1m]` to `claude-opus-5-5`. It now
strips a leading `anthropic/` and a `:variant` suffix, and maps `5.5` to
`5-5`.
## What
A client that declares the AIR capability `loadReplayEnd` gets one extra
`session/update` after the history replay of `session/load`:
```json
{
"sessionId": "<loaded session>",
"update": {
"sessionUpdate": "session_info_update",
"_meta": { "jetbrains": { "air": { "version": 1, "loadReplayEnd": true } } }
}
}
```
The client declares the capability in
`clientCapabilities._meta.jetbrains.air.capabilities`, as it declares
the other AIR extensions. The agent does not advertise it.
## Why
ACP has no signal that the history replay of `session/load` is over,
other than the response. This adapter replays the transcript while the
Claude Code CLI starts, and the CLI start takes most of the load time.
So the history is whole long before the response. With this event, the
client can show the history at once.
The protocol side is the RFD
https://github.com/agentclientprotocol/agent-client-protocol/pull/2407.
## Design change
The first version of this PR marked each replayed notification with an
index (`loadSessionReplayIndex`) and the last one with
`loadSessionEndOfRecordedHistory`. To know the last one, it held the
latest update and queued every other outbound message of the session
behind it. That design is replaced with a capability-gated single end
event. The replay sends as before. Only one event is added at its end.
There are no indexes, no held update and no queue.
## When the event is sent
- After every replayed update, the subagent history that the parent
replay sends to the child sessions included, and before the
`session/load` response.
- Also for an empty history.
- For `session/load` of a session that starts while the replay runs, for
`session/load` of a session that is already live, and for the ACP v2
`session/resume` with `replayFrom: {type: "start"}`.
It is not sent:
- When the replay stops (the CLI start failed during the replay) or
fails.
- For a live update.
- To a client without the capability.
The update has no `title` and no `updatedAt`. A `null` there would clear
the value. The load can still fail after the event, for example when the
CLI start fails after the replay. The event means that the recorded
history arrived whole.
## Client status
JetBrains Air shows the history before the load answer only after the
Kotlin SDK delivers the updates of a loading session before the answer.
An SDK PR for this is in progress.
## Tests
- `create-session-options.test.ts`: the event comes once after the
replay and before the response; before the CLI start finishes; for an
empty history; for an already live session; not when the CLI start fails
part way; not when the replay fails; not without the capability. The
event has no `title` and no `updatedAt` key.
- `acp-agent.test.ts`: the subagent history from its own transcript file
comes before the event.
- `acp-v2.test.ts`: v2 `session/resume` with a replay ends with the
event before the response; a resume without a replay sends none.
- `docs/air-extensions.md`: a new "Load replay end" section, and the
capability and key rows.
## Problem
Claude Code advertises a skill by the `name:` of its `SKILL.md`
frontmatter, which does not have to match the name of the directory — or
of the symlink — that holds the file. `resolveSkillPath` joined the
advertised name into each container path and only checked whether the
result exists, so every such skill resolved to nothing.
For an AIR client the consequence is visible:
`getAvailableSlashCommands` attaches `_meta.jetbrains.air.kind =
"skill"` and the `SKILL.md` path only when the path resolves, so the
skill reached the client as a plain command and disappeared from the
skill completion, while `/name` kept working. Symlinked skills hit this
most often, because the link name is usually chosen independently of the
skill's declared name.
Reproduced with a project whose `.claude/skills/mismatch/SKILL.md`
declares `name: frontname`, and with `.claude/skills/aliased2 ->
…/target2` declaring `name: front2`: both were advertised without any
`_meta`. The same happens in a large repo where
`.claude/skills/rubymine` declares `name: rubymine-workflows`.
## Fix
The existing join-by-name probe stays the first attempt, so nothing
changes for the common layout. When it misses, the same containers are
scanned, in the same order, for a `SKILL.md` whose frontmatter declares
the requested name:
- `statSync`/`existsSync` follow links, so a skill behind a symlinked
directory is scanned like any other;
- each container is listed per lookup, and a `SKILL.md` whose
modification time has not changed keeps the name of the previous scan,
so an unchanged file is parsed once;
- only the frontmatter block of at most 8 KB is parsed, so a `name:` in
the body is not a name;
- a directory that is itself named like the skill still wins over
another skill that merely declares the name.
## Tests
Eight cases in `src/tests/tools.test.ts` cover a directory/declared-name
mismatch, a symlink with a differing link name in both `.claude/skills`
and `.agents/skills`, the precedence of the directory that carries the
name, scoped and plugin spellings resolved by declared name, a file
without frontmatter, and a declared name that changes after the first
resolution.
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Happy <yesreply@happy.engineering>
Adds a `/remote-control [name]` command (alias `/rc`) so a session
hosted over ACP can be continued from claude.ai/code or the Claude
mobile app. Addresses #459.
The CLI's own `/remote-control` is terminal-bound and isn't advertised
to SDK hosts, and `remoteControlAtStartup` only applies to interactive
sessions. The SDK does expose a runtime `enableRemoteControl(enabled,
name?)` on the query object, which returns the session URL. See
anthropics/claude-agent-sdk-typescript#460.
- The adapter handles the command itself in `prompt()`, calls
`enableRemoteControl(true, name)`, and replies with the session URL as
an agent message. The turn ends without going to the model.
- Failures (for example Remote Control disabled by policy) are reported
to the user in the same way.
- The command is added to `available_commands_update` only when the
query exposes the method.
- `enableRemoteControl` is not in the published `Query` types yet, so it
is typed locally the same way as `mcpAuthenticate`.
## Testing
- `npm run check`, `npm run build` and `npm run test:run` pass,
including new tests in `src/tests/remote-control.test.ts`.
- Ran the built agent through `examples/simple-client.ts` against a real
Claude Max session: the command was advertised, `/remote-control`
returned a working `claude.ai/code` URL, and prompts sent from the
Claude iOS app ran in the session and were answered.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Noah Eisenbruch <noaheisenbruch@gmail.com>
Co-authored-by: Andrey Bragin <andrey.bragin@jetbrains.com>
## Problem
`session/fork` copies the transcript and then starts the forked session,
which takes several seconds. Meanwhile the list subscription sees the
new transcript and sends `_session/list/changes` with the fork row
before the fork response. The client meets an unknown session and lists
it as a session of its own. JetBrains Air then refuses the fork
(IJAI-4105).
## Fix
- `ForkHolds` (in `session-index/list-subscriptions.ts`, owned by the
session index service) holds the row of a fork until the `session/fork`
response is out:
- by `forkedFrom`, for an unsent row, while the transcript is copied;
- by the fork id after the copy. This covers a fork whose first record
is over 64 KB, because the scan reads `forkedFrom` from the head only.
- `session/list` leaves a held fork out too.
- The v1 and v2 fork handlers run in `forking(...)`. A `setTimeout(0)`
releases the rows after the SDK has written the response.
- The holds live in the service, so a subscription that starts during a
fork holds that fork too.
## Tests
`holds a fork back until the response of its session/fork is out`
(session-index.test.ts). It fails without the fix.
Updates `@agentclientprotocol/sdk` to 1.9.0 (schema v1.26.0,
v2.0.0-alpha.9) and adapts the agent to the v2 spec clarifications in
that release.
## Changes
**Client-provided system prompt (unstable)**
- Advertises `sessionCapabilities.systemPrompt` with `mode.override` on
v1 and `session.systemPrompt` on v2.
- Accepted on `session/new`, `load`, `resume`, and `fork`:
- `append` adds the text after the Claude Code preset.
- `override` replaces the preset with the text. Tools, MCP servers,
permissions, and settings (including CLAUDE.md through `settingSources`)
are unchanged.
- An unsupported mode or non-text content fails with `invalid_params`
before any session is created, reused, or forked.
- Takes precedence over the `_meta.systemPrompt` extension. AIR custom
instructions still follow the client text.
- A different prompt on resume recreates a live session. Claude Code
reuses its saved system prompt until the next compaction, which the RFD
allows.
**v2 session/resume state snapshot**
- Sends the current foreground state (`idle`, `running`, or
`requires_action`) after any replay and before the response, as the
clarified spec requires. This applies even without a replay.
**v2 replay of subagents**
- No longer replays a child's past `running`/`idle` as current activity.
Each replayed child gets one `state_update` with its last state after
the replay.
**v2 tool call `_meta` patches**
- Reports carry only the top-level keys that changed. `claudeCode` is
still sent whole, since clients don't merge nested objects.
- A removed key is sent as `null`.
- A tool call id that starts again removes the old keys.
- A replayed tool call this connection has not reported sends `_meta:
null` first, then the current keys.
**Cancellation and close**
- A `session/close` whose turns don't end within the teardown timeout
settles them as cancelled. The client gets `idle` with `cancelled`, or
`-32800` for a prompt never inserted, before the close response.
- A prompt racing `session/close` ends as cancelled (`-32800` on v2)
instead of `-32603`. On v1 it now returns `stopReason: cancelled`,
matching a prompt queued just before the close.
- A stream error after a cancel ends the work as `cancelled` instead of
`error`.
## Not in this PR
- After a URL-mode MCP elicitation is accepted, the session reports
`running` right away. The spec asks for `requires_action` until the
external interaction finishes, but a server may never send
`elicitation_complete`, so this needs its own design.
- `requires_action` is reported while one foreground subagent waits,
even if other foreground work can continue. This is SHOULD-level in the
spec.
## Testing
- `npm run build`, `npm run check`, and `npm run test:run` pass.
- Golden files changed because of the new capability and the resume
snapshot. `compare.ts` allows the new capability against origin/main.
- `session index cost > reads only the changed transcript for a
subscription` failed intermittently locally (about 3 in 15 runs) on a
loaded machine. This PR doesn't touch the session index, but watch it in
CI.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
After a restart the AIR subagent map is empty, so a SendMessage resume
opened no generation and the child's messages stayed buffered under the
old launch id. Restore the agent from the session history on a resume
signal or on a message with an unseen parent_tool_use_id, with a
generation id that can't collide with ids the client stored before.
AIR gets `_meta.jetbrains.air.mcp = {server, tool}` on MCP tool calls,
so the MCP card does not depend on the title format.
The adapter splits the `mcp__<server>__<tool>` tool name the way Claude
Code does. `server` is the normalized name. Clients other than AIR get
nothing new.
Split from IJAI-872. The SDK does not expose MCP progress yet, so this
PR does not forward it.
## What
The Claude Code CLI can predict the prompt the user is likely to send
next. This adapter asked for nothing and dropped the `prompt_suggestion`
message. It now asks for the prediction (`promptSuggestions: true`) and
forwards the one prediction of a turn.
ACP has no field for a composer prefill, so the value travels as
```json
{
"sessionUpdate": "session_info_update",
"_meta": { "promptSuggestions": { "suggestions": [{ "text": "Run the tests" }] } }
}
```
The key names no vendor, so another client can read it. AIR already
renders the first non-blank text as gray text in an empty composer,
where Tab fills the composer and sends nothing.
## Behavior
- `suggestions: []` clears the prediction the client holds: at the next
`session/prompt`, because that turn's prediction is spent, and on a
`conversation_reset`, because the transcript it was drawn from is gone.
- A prediction the next prompt outran — the user sent the next prompt
before the adapter read the prediction off the SDK stream — is dropped
instead of published mid-turn.
- A blank prediction never goes on the wire.
- The update is sent only to an AIR client, like the other extension
keys, so non-AIR traffic is unchanged (the key is added to
`AIR_ONLY_META_KEYS`; the `origin/main` scenario baselines stay
byte-identical).
- The CLI predicts nothing on the first turn, after an API error, in
plan mode, and at the usage limit, so a turn without a prediction is
normal. A caller can opt out with
`_meta.claudeCode.options.promptSuggestions: false`.
Documented in `docs/air-extensions.md`.
## Tests
`src/tests/prompt-suggestions.test.ts` covers the wire shape, the
publish after the turn's result, the clear at the next prompt, the
dropped stale prediction, the blank prediction, and a non-AIR client.
`src/tests/create-session-options.test.ts` covers the SDK option and the
caller opt-out.
`npm run check`, `npm run build` and the touched suites are green; the
full `test:run` has pre-existing flakiness on this machine
(session-index watchers, providers) unrelated to this change.
Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Happy <yesreply@happy.engineering>
## Summary
`agentFileChangeReport` took its path list only from Claude's file
checkpoints (`rewindFiles` dry run). A checkpoint tracks only the files
that the root agent edits with its own file tool. So a file that only a
subagent edited never appeared in the report. Air then showed no "Since
last turn" row for it, and Last Turn review could not include it.
- Collect the `file_path` / `notebook_path` of successful
`Edit`/`Write`/`MultiEdit`/`NotebookEdit` results from subagent messages
in the stream. Store them on the active turn. This also covers
background subagents, because the turn stays open until they finish.
- Merge these paths with the checkpoint list. When the checkpoint
preview times out or is unavailable, report the subagent paths instead
of `unavailable`.
Updates `@anthropic-ai/claude-agent-sdk` from 0.3.296 to 0.3.300 (parity
with Claude Code v2.1.300), and `@anthropic-ai/sdk` from 0.133.0 to
0.134.0.
No code changes needed. The new types are an optional `property_order`
on elicitation requests, `nextFireAt` on the CronCreate/CronList
outputs, and `owned` on Artifact outputs. We don't need any of them.
Fixes picked up that affect this agent:
- `importSessionToStore` (used for session forks) no longer skips
transcript rows containing U+2028/U+2029 on Node 24.
- Resuming an SDK session after a compaction no longer loses the recent
messages or the compaction summary in some cases.
- Background subagents in auto mode no longer send their final report
twice or merge it into another turn.
- Queued content-block prompts merged into one turn are now separated by
a line break.
- `ScheduleWakeup` now fires while a background task is running.
Behaviour change: `MAX_THINKING_TOKENS=0` (sent as `thinking: { type:
"disabled" }`) now runs adaptive thinking on models that can't turn
thinking off.
`npm run build`, `npm run check` and `npm run test:run` all pass.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
## What
Marks `session/list` and `_session/list/changes` rows whose session runs
in a linked Git worktree that Claude Code itself created (`claude
--worktree`, the `EnterWorktree` tool), as
`_meta.jetbrains.air.agentWorktree: true`. A new agent capability
`sessionWorktrees`, advertised together with `sessionIndex`, tells the
client that rows carry the field, so a missing field means "not made by
the agent" rather than "unknown".
## Why
With `includeWorktrees`, a client gets sessions from every linked
worktree with nothing to tell them apart. A worktree Claude Code made
for a session belongs to the project the user started it from; a
worktree the user made by hand is a separate checkout. Only the agent
knows which is which.
## How
- The rule reads the transcript's `worktree-state` records: the latest
one wins; the session counts only when `worktreeSession` is non-null and
`enteredExisting` is not `true`. `environment.isWorktree` is not used,
since plain git detection is also true for user-made worktrees.
- The record is parsed in the existing head/tail transcript scan, so no
extra file reads. The row is marked only when its `cwd` is in a linked
worktree (`<common-dir>/worktrees/<name>`), never for the main checkout
or a submodule.
- The row's `cwd` stays the session's own directory. The field is `true`
or absent.
Proposed as `SessionInfo.agentWorktree` plus a `agentWorktrees`
capability marker in the session list extensions RFD:
agentclientprotocol/agent-client-protocol#2323. Docs:
`docs/air-extensions.md`.
## Tests
`src/tests/session-index.test.ts`: marked worktree, `enteredExisting`,
no record (user worktree), a later `null` record, main checkout,
`_session/list/changes` rows, capability negotiation, and scan windows.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Found by running the ACP TCK's v2 suite against the adapter
(ACP-ADDDIRS-202). The code is shared, so it also fixes v1's
`session/load` and `session/resume`.
## The bug
A `session/resume` or `session/load` can change a live session's
settings: its `cwd`, additional directories, MCP servers, or the other
settings in its fingerprint. When that happens, `getOrCreateSession`
tears the live query down and starts a new one with `resume: sessionId`.
Claude Code writes the conversation only at the first prompt, so for a
session that was never prompted, the resume failed with `-32002`
"Resource not found". The live session was already torn down by then, so
the client lost a session it had a moment earlier.
## The fix
The sign-out path already handled the same case: it tries `resume`, and
on `resourceNotFound` it starts a fresh query under the same id with
`reuseSessionId`. That logic is now one helper, `recreateLiveSession`,
used by both:
- **`getOrCreateSession`** uses it when the session was live. A session
that was never prompted then starts a fresh query under its own id. It
loses no history, because it had none, and it keeps its mode.
- **A session that isn't loaded here** still resumes directly. If it has
no stored conversation, that still fails with `-32002`, since the
session really is unknown.
- **`recreateSignedOutQuery`** keeps its own handling: if both attempts
fail, it puts the old session object back.
## Checks
- **ACP TCK v2** (`agentclientprotocol/acp-tck` at `fa00ccd`) against
this build: ACP-ADDDIRS-202 now passes, where it failed before.
ACP-ADDDIRS-201 and ACP-RESUME-201 to 205 still pass.
- **Live v1 `session/load`**, Claude Code 2.1.296: create a session,
then load it with a new additional directory before any prompt.
- On `main`, the load failed with `-32002`.
- With this fix, the load succeeds. A prompt then read a file that
exists only in the new directory, and the transcript was saved under the
same session id.
- **Tests:** three new tests:
- a live session that was never prompted starts a fresh query with its
mode;
- an unknown session still fails;
- another failure of a live session's resume doesn't start a fresh
query.
Removing the fallback, applying it to every error, or applying it to
sessions that aren't loaded each fails a test. The sign-out tests pass
through the shared helper.
- **Suite:** `npm run check`, build and all 3068 tests pass, with no
golden changes.
**Not covered:** a model chosen with `session/set_config_option` before
the first prompt resets to the default when such a session is recreated,
as it already did after a sign-out. The mode is kept.
Found by running the ACP TCK's v2 suite against the adapter
(ACP-DELETE-201 and ACP-DELETE-203). The code is shared, so v1 clients
get the fix too.
## The bug
ACP says: "Deleting an already-deleted session, or a session that never
existed, **SHOULD** succeed silently." For a client that is neither AIR
nor a `sessionIndex` client, `session/delete` instead failed with
`-32603` "Internal error" in three cases:
- **A session this connection ran but never prompted.** Claude Code
writes the transcript at the first prompt. So the adapter closed the
live session, then the SDK delete threw "not found in any project
directory".
- **An unknown session.** The SDK delete throws the same "not found"
error.
- **An id that isn't a UUID.** The SDK delete throws "Invalid
sessionId".
## The fix
A new `deleteSessionIfStored` in `src/session-index/service.ts` handles
every other client's delete:
- An id that isn't a session id can't name a transcript, so it returns
`{}` without calling the SDK.
- The SDK's own "not found" means nothing is on disk, so that also
returns `{}`. It's recognised by the existing `isSdkNotFound`.
- Any other SDK failure, such as a permission error, still fails the
request.
The two AIR paths are unchanged, because `docs/air-extensions.md`
documents their errors: `-32002` for an unknown session on a
`sessionIndex` client, and the SDK's error for AIR without
`sessionIndex`. The doc now describes the plain client's behavior.
## Checks
- **ACP TCK v2** (`agentclientprotocol/acp-tck` at `fa00ccd`) against
this build: ACP-DELETE-201 and ACP-DELETE-203 now pass, where both
failed before. ACP-DELETE-202 is still skipped, because `session/list`
doesn't show a session that was never prompted.
- **Tests:** three new tests: a never-prompted live session, an unknown
session, and an id that isn't a UUID. Removing either rule, or
swallowing every error, fails a test. The existing delete tests now use
UUID ids, which is what real sessions have.
- **Suite:** `npm run check`, build and all 3068 tests pass, with no
golden changes.
Stacked on #1347, which gives each running child the `cancel`
capability. Merge #1347 first; this PR's base is its branch.
## What changes
On a client that gets the subagents RFD form (v1 with
`clientCapabilities.subagents` and not AIR, and v2), `session/cancel` on
the parent now spares background subagents. They keep running, as
acp#2308 prescribes ("a background child that the cancelled work did not
wait on may continue"), and the client can stop each one with its
child's `cancel` from #1347. Foreground subagents that the turn waits on
still stop.
Plain v1 clients and AIR are unchanged: the interrupt still stops their
background subagents, since they have no way to stop one.
## How
- **The declaration.** Claude Code's interrupt kills background
subagents and workflows unless the query declares
`perTaskStopAffordance`. The SDK describes it as "this consumer renders
a per-task stop control", and an RFD client now has that control. The
adapter declares the option for those clients. It comes before
`_meta.claudeCode.options`, so a client can turn it off.
- **Workflows.** The declaration also spares background workflows
(`local_workflow`). A workflow's agents are not subagent tasks and get
no child session, so a client can't stop a workflow unless it is AIR
with `asyncTasks`. When a session declares the option and the client has
no such control, `session/cancel` stops each live background workflow
with `Query.stopTask` after the interrupt. Workflows therefore behave as
they did before.
- **Background commands** survive an interrupt with or without the
declaration (checked live and in the CLI code), so nothing changes for
them.
Where I read Claude Code 2.1.296's CLI: without the declaration, the
interrupt runs a kill of every running background `local_agent` and
`local_workflow` task. With it, the interrupt kills only observer tasks.
Adapter interrupts name no prompt, so this runs on every
`session/cancel`, including one with no turn running. The declaration's
only other effect is on requests with `interrupt_if_running`, which the
adapter never sends.
## Checks
**Live, Claude Code 2.1.296, through the built adapter.** Every update
was checked against the schema, and no run had a violation or left a
tool call open. Survival was checked by whether the background command's
process was alive 2 s after the cancel.
| Client | Background work at the cancel | Result |
|---|---|---|
| v1 RFD | subagent running a command | Prompt `cancelled` 9 ms after
the cancel. The child kept running, completed its command and reported
`idle end_turn`. Claude Code's follow-up cycle then streamed to the
root. |
| v1 RFD | subagent with an open permission request | The request stayed
open through the cancel. The client allowed it 5 s later, and the child
ran the command and ended `idle end_turn`. |
| v1 RFD | workflow | The workflow and its command stopped, with no
follow-up cycle. Same as the plain client. |
| v1 plain | subagent | Unchanged: the interrupt killed the child, and
its command's tool call ended `failed`. |
| v1 plain | workflow | Unchanged: stopped, no follow-up. |
| v2 | subagent | Root `idle cancelled` 11 ms after the cancel. The
child kept running and later reported `idle end_turn`, and the root went
`running`, then `idle end_turn`, for the follow-up. |
| v2 | workflow | Stopped, no follow-up. |
**Direct SDK probes** decided the design:
- With the declaration, an interrupt spares a background workflow.
- Without it, the interrupt kills the workflow.
- A `stopTask` on a workflow, before or after the interrupt, stops it
and its command, and Claude Code starts no follow-up cycle, the same as
when the interrupt killed it.
**Tests:**
- Option tests: the declaration for each client form, a caller's
override, and when a cancel stops workflows.
- Cancel tests: only workflows are stopped, after the interrupt and only
when the flag is set.
- Removing any of the eight rules fails a test.
- `npm run check`, build and all 3020 tests pass, with no golden
changes.
## Not covered
- A paused background workflow (one Claude Code restored on a resume)
would also be stopped at a cancel, where the interrupt left it alone. I
didn't check whether such a workflow reports `task_started`.
- Standard ACP has no control to stop background work that is not a
session, such as a workflow or a background command. Only AIR has one,
through its async tasks extension.
A client on the subagents RFD can now stop one subagent without
cancelling the turn. Each running child is announced with `capabilities:
{ cancel: {} }`, and `session/cancel` with the child's session id stops
that child's current work.
## What Claude Code does
From direct SDK probes of `Query.stopTask(taskId)` and runs through the
adapter (Claude Code 2.1.293 and 2.1.296):
| Case | What Claude Code sends |
|---|---|
| Foreground subagent running a command | At once: `task_updated`
`killed` and `task_notification` `stopped` for the subagent, `stopped`
for its command's task, the command's interrupted result, then the Agent
call's interrupted result (`non_execution_kind: "interrupted"`). The
parent's turn goes on and ends normally. |
| Background subagent | The same events and result, then Claude Code's
follow-up cycle about the stop. |
| Subagent with an open permission request | The request is withdrawn
(its `AbortSignal` fires), and both calls get results. |
| Subagent waiting on its own foreground subagent | The grandchild is
stopped too, with its own `killed` and `stopped`, which is the cascade
the RFD requires. |
## The change
- **The grant:** `announceNativeSubagent` grants `cancel` to each live
RFD child. A replayed child gets no capabilities, since it no longer
runs (the RFD's freshness rule for reconnection). A routing-only
ancestor that a restore announces gets none either.
- **The cancel:** `cancel` checks first whether the session id is a
child of one of its sessions (`NativeSubagentRuntime.cancelChild`), and
if so calls `Query.stopTask` with the child's agent id. It sends no
interrupt, so the parent's work goes on. A stop that Claude Code refuses
is logged.
- **The report comes from the SDK's events,** `killed` or `stopped`,
which `finishTask` already turns into `idle` with `cancelled`. Accepting
the stop is no evidence, as the RFD says, and a cancel that races with a
child's end does not rewrite its outcome.
- **Requests:** a request that the stop withdraws reports no `running`
before `idle cancelled`. `awaitingUser` now counts cancels of the child
and of its ancestors, as it counted the root's (#1337). An ancestor's
cancel stops the foreground subagents under it.
- **Unchanged:** AIR keeps its draft and grants nothing, and a cancel of
a root session works as before.
## Evidence
**Live, through the adapter** (Claude Code 2.1.296, Sonnet), every
update checked against the schema, with no violations:
| Run | Child | Parent |
|---|---|---|
| v1 RFD, foreground child running a command | `running`,
`requires_action`, `running`, `idle cancelled` 9 ms after the cancel;
its command `failed` | Agent call `failed`; turn ends `end_turn` |
| v1 RFD, background child while v1 holds the turn | `idle cancelled`;
its command `failed` | the held turn settles with `end_turn` |
| v1 RFD, child with its permission request open | `requires_action`,
then `idle cancelled`, with no `running` between | turn ends `end_turn`
|
| v2, foreground child | `idle cancelled` on the root's stream and its
own | Agent call `cancelled`; root `idle end_turn` |
No tool call was left open in any run.
**Tests:**
- `native-subagents.test.ts`:
- `cancelChild` stops the child's task and reports nothing itself, and
the SDK's `killed` reports `idle cancelled`;
- no stop for a session that is no child, or for AIR;
- no `running` for a request that the child's own cancel withdraws, or
that its parent's cancel withdraws.
- `acp-agent.test.ts`: `session/cancel` on a child calls `stopTask`, not
`interrupt`, and the turn ends `end_turn`; a refused stop is logged;
nothing happens for an unknown session id or an AIR child.
- `acp-v2.test.ts`: the same over v2, with the child's `idle cancelled`
on both streams.
- **Golden files:** the six v2 subagent golden files gain `capabilities:
{ cancel: {} }` on each announcement, and nothing else. No AIR golden
file changes.
- **Mutation checks:** removing each of these fails at least one test:
- the grant;
- the routing to the child;
- the child's cancel count;
- the ancestors in the count;
- the AIR exclusion;
- the error handling.
So does reporting `idle cancelled` as soon as the stop is accepted.
`npm run check`, build and the full suite (3014 tests) pass.
## Not changed, and a decision
- **A parent cancel still stops background subagents.** Claude Code does
that because the adapter does not declare the SDK's
`perTaskStopAffordance` option. Declared, an interrupt spares background
agents and background shell commands (checked live: both ran to
completion after the interrupt), as
agentclientprotocol/agent-client-protocol#2308 prefers. Background shell
commands would then outlive a cancel too, and ACP has no control to stop
them, so declaring it is left for a separate decision.
- **Order:** Claude Code sends the stopped child's command result right
after its `killed` event, so the client sees `idle cancelled` a few
milliseconds before that call ends. The RFD has the client mark the
child's unfinished calls cancelled at that point and still accept later
updates.
- **On v2,** the stopped child's command ends `failed`, not `cancelled`:
Claude Code's result for a subagent's command carries no non-execution
kind.
### Summary
Addresses [IJAI-1783](https://youtrack.jetbrains.com/issue/IJAI-1783).
An organization can restrict the models its JetBrains gateway serves,
but a session routed through `providers/set` offered the whole Claude
Code catalogue, so the picker showed models the gateway then refused.
`providers/set` now lists the gateway's models before it responds, and
the model picker offers only the SDK models the gateway lists.
- `anthropic`: `GET {baseUrl}/v1/models?limit=1000`, paginated by
`has_more`/`last_id`, with the provider headers and `anthropic-version`.
- `bedrock`: `GET {baseUrl}/foundation-models` (`ListFoundationModels`,
`modelSummaries[].modelId`), the listing the JetBrains gateway answers
on its Bedrock route. Only `anthropic.` ids count. The cross-region
prefix `global` when listed, else that of the first listed id, becomes
the session's `ANTHROPIC_BEDROCK_REGION_PREFIX`, so the CLI calls the
models under the prefix the gateway serves; ids of other prefixes, and
SDK rows resolved to another prefix, are dropped.
- Rows match by `resolvedModel` (or `value`) without dates, `-vN:M`
suffixes, `[1m]` hints and provider prefixes; the narrowing runs after
the `availableModels` allowlist. When the gateway does not list the
model a session runs (the dropped default, or a resumed or recreated
session's last model), the session switches to the first listed one with
`setModel`, so the CLI does not keep running an unlisted model.
- The listing runs in the provider-update queue, so `providers/set` and
`providers/disable` apply in the order they arrive; logout also clears a
`providers/set` that is still listing.
- A 4xx answer means the gateway has no listing: `providers/set`
succeeds and nothing is narrowed. Any other failed listing (network
error, 5xx, unexpected body, 10 s timeout) fails `providers/set` with
`internal_error`, and the previous provider stays in effect. An invalid
header or a base URL with credentials fails without repeating the value.
A listing that matches no SDK model leaves the session with no model to
offer: there is no model config option.
- `vertex`, gateways set through `authenticate`, and native routing are
not listed. Setting the same gateway again reuses its listing;
`providers/disable` and logout drop it.
- `docs/model-configuration.md` describes the narrowing.
### Not covered
Background haiku requests, subagents, and a `/model` typed into the
prompt choose their own model and are not checked against the listing.
### Verification
```bash
npm run check
npm run build
npm run test:run -- --no-file-parallelism # 2964 passed, 5 failed, 30 skipped; all 5 in session-index.test.ts, flaky on main too
```
Tests stub `fetch` (`src/tests/setup-no-network.ts` answers an empty
listing by default) and cover the listing requests and pagination, the
Bedrock region prefix and its env, region-aware matching, the dropped
default, the failing `providers/set`, and the empty picker. The
JetBrains Bedrock gateway's `/foundation-models` answers
`global.anthropic.claude-{haiku,opus,sonnet}-5-5` (seen through Junie,
which lists the same route); this adapter has not yet been run end to
end against it.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
## Problem
On ACP v2 the adapter reports a session's foreground work as
`state_update`s: `running`, then `requires_action` while a permission
request or question that blocks the work is open, then `running` again,
and finally `idle` with a stop reason. A request that ends because
`session/cancel` or `session/close` stopped the work is not an answer,
but it still reported `running`. #1337 fixed that for a subagent's child
session and listed the session's own request under "Not covered". That
request did not change, and since #1338 neither did its AskUserQuestion,
which now ends at the abort too.
On `main`, with Claude Code 2.1.296, v2, a Bash permission request that
the client holds open, and then a cancel or a close:
| What stops the work | States the session reported |
| --- | --- |
| `session/cancel` | `running`, `requires_action`, **`running`**, `idle
cancelled` |
| `session/close` | `running`, `requires_action`, **`running`**, `idle
cancelled`, all before the close response |
Claude Code's interrupt withdraws the request, so the SDK aborts the
signal of the `canUseTool` call, the request's `finally` calls
`syncAwaitingUser`, and with no blocking request left it reports
`running`. The result that ends the work comes 2 to 9 ms later in these
runs, so the client shows work that is being stopped as working.
## Cause
`syncAwaitingUser` reported `running` whenever the last blocking request
ended, whatever ended it. A request ends when the user answers it or
when Claude Code withdraws it, and a withdrawal alone does not say
whether the work was stopped. A `PermissionRequest` hook that answers
also makes Claude Code withdraw the request, and the work goes on (9 s
more in a live run), as #1337 found. So "a withdrawn request reports no
`running`" is wrong. The rule that fits is #1337's: no `running` when
the request was withdrawn after a cancel that came while it was open.
## Change
- `cancelTurns` (called for `session/cancel`, and by the teardown of
`session/close`) marks each request that is open, in
`Session.openUserInputs`.
- `withPendingUserInput` takes the request's `signal`. When the request
ends with its signal aborted and the mark set, `syncAwaitingUser` stops
waiting but reports no `running`. The four callers pass their signal:
permission requests, AskUserQuestion, MCP elicitation, and the refusal
fallback prompt. (#1337 counts the parent's cancels and compares the
count when the request ends. Here each open request is already an entry
of `openUserInputs`, so the cancel marks it. Same rule.)
- Everything else is as before:
- an answered request reports `running`, also after the cancel;
- a withdrawal without a cancel reports `running`;
- with two requests open, only the last one to end reports, by how that
one ended;
- a request that opens after the cancel is judged on its own, so a hook
that withdraws it still reports `running`.
- A foreground subagent's request blocks the turn, so it behaves like
the turn's own. A background subagent's request does not block it
(`blocksForeground`), so the root's states do not change for it. #1337's
child states are unchanged.
- `ForegroundEvents.running` and `v2Foreground` say when `running` is
not reported.
v1 reports no session state, so nothing changes there. AIR is unchanged:
the scenario golden files do not change.
## Evidence
Live runs against Claude Code 2.1.296 (Sonnet), driving `dist/index.js`
over stdio as a v2 client (`CLAUDE_AGENT_ACP_EXPERIMENTAL_V2=1`) that
holds the request and ignores `$/cancel_request`, with the session's cwd
in default permission mode. Every update and request validated against
the SDK's v2 JSON schema: 0 violations in all runs. The root's states:
| Run | `main` | This PR |
| --- | --- | --- |
| `session/cancel`, Bash permission request | `running`,
`requires_action`, `running`, `idle cancelled` | `running`,
`requires_action`, `idle cancelled` |
| `session/cancel`, AskUserQuestion | `running`, `requires_action`,
`running`, `idle cancelled` | `running`, `requires_action`, `idle
cancelled` |
| `session/close` | `running`, `requires_action`, `running`, `idle
cancelled` | `running`, `requires_action`, `idle cancelled` |
| `session/cancel`, request of a foreground subagent (#1337's run) |
root as above; child `running`, `requires_action`, `idle cancelled` |
root `running`, `requires_action`, `idle cancelled`; child the same |
| `PermissionRequest` hook allows after 3 s, no cancel | `running`,
`requires_action`, `running`, `idle end_turn` | the same |
| the client answers after 2 s | `running`, `requires_action`,
`running`, `idle end_turn` | the same |
| `kill -9` of Claude Code, no cancel | `running`, `requires_action`,
`running`, `idle error` | the same (see below) |
The hook run is why a withdrawal alone cannot mean "stopped": Claude
Code withdrew the request 3 s in, and the command then ran 9 s more. A
v1 run of the cancel (no state updates there) is identical on both
builds.
Tests, in `acp-v2.test.ts`, through the v2 client app, which validates
every update:
- For each of the four kinds of request (permission request,
AskUserQuestion, an MCP server's elicitation, the refusal fallback
prompt): a `session/cancel` withdraws it, a `session/close` withdraws it
(the harness gets a `close` hook, as the SDK's cleanup of a closed query
aborts open requests), and Claude Code withdraws it without a cancel.
- The user answers after the cancel; a request that opens after the
cancel and is then withdrawn; two requests open together (both withdrawn
by the cancel, and one withdrawn and the other answered, in each order);
a request of a cycle that Claude Code started.
- Subagents: a foreground subagent's request also holds the root (an
assertion added to #1337's test); a background subagent's request
changes nothing of the root's states, alone and next to the turn's own
request.
13 of them fail on `main` (12 new tests and the extended one); the other
8 new tests pass there and guard what must not change.
Removal checks, each run against `acp-v2.test.ts`:
| Removed or changed | Tests that fail |
| --- | --- |
| no rule: the end always reports `running` | 13 |
| the cancel marks no request | 13 |
| a mark is enough, the signal is not required | 2 (answered after the
cancel) |
| the simple rule "any withdrawal means stopped" | 5 (the hook cases,
and the request after the cancel) |
| `session.cancelled` in place of the mark of a cancel that came while
the request was open | 1 (the request after the cancel) |
| sticky: after one request was withdrawn by a cancel, no later request
reports `running` | 1 (answers the one the cancel did not withdraw) |
| permission requests do not pass their signal | 6 |
| AskUserQuestion does not pass its signal | 3 |
| MCP elicitation does not pass its signal | 2 |
| the refusal fallback prompt does not pass its signal | 2 |
`npm run check`, `npm run build` and `npm run test:run` pass (2999 tests
passed, 30 skipped; the scenario golden files do not change).
## Not covered
- **A stream end without a cancel.** If Claude Code exits by itself, the
SDK's cleanup aborts every request before the consumer reads the end of
the stream, and nothing at that moment tells it from a hook's
withdrawal. Live (`kill -9` of the CLI, table above): `running` 2 ms
before the `idle`, and the session is dead right after. Left as it is,
for the reasons #1337 gives for children.
- The rule assumes, like #1337's, that the work reports its end right
after such a withdrawal. A turn always does (the force-cancel backstop
ends a wedged one); a cycle with no active turn has no such backstop.
- Open PRs #1344 and #1345 also change `src/acp-agent.ts`; this branch
merges cleanly with each (checked with `git merge-tree`).
A model cycle that Claude Code starts on its own now closes, at its end,
the tool calls that Claude abandoned before they ran, as a turn's end
already does.
## The bug
Claude can start a tool use and never finish the message that holds it,
for example when the stream is cut off. The tool never runs, and no
result comes. At a turn's end, `settleActive` closes such a call
(`closeUnfinished`: "Claude stopped this tool call before it ran.",
`failed` on v1, `cancelled` on v2). A cycle that Claude Code started on
its own, such as its follow-up after a background command finished, has
no turn. So nothing closed its abandoned calls, and the client kept them
open.
## The fix
`closeCancelledCycleToolCalls` becomes `closeCycleToolCalls` and runs at
every end of a cycle: its result, or an idle that no result precedes.
- **After a cancel:** unchanged (#1339, #1342).
- **At any other end:** every call that ran already has its result. What
is open is a call of the main conversation that was never dispatched,
which is closed with the same report a turn's end sends. A subagent's
calls are not the cycle's: a background subagent runs on.
On v2 the report comes before the cycle's `idle`.
## Evidence
**Tests:**
- v1, a cycle that runs a command, starts a background subagent that is
streaming a tool use as the cycle ends, and abandons a tool use: only
the abandoned call is closed, once. The command keeps its one result,
and the subagent's call stays open.
- v1, a cycle that ends at an idle with no result (the stream dropped
mid-cycle): its abandoned call is closed there.
- v2: the abandoned call goes `pending`, then `cancelled`, before the
cycle's `idle end_turn`.
- **Mutation checks:** each of these fails at least one test:
- no closing at a normal end;
- closing a subagent's calls;
- closing dispatched calls (an existing test catches it);
- closing only at the result, not at the idle.
`npm run check`, build and the full suite (2982 tests) pass, with no
golden changes.
**Not checked live:** Claude abandons a tool use only when something
cuts its message off, such as a steer or a dropped stream, which a live
run cannot set up reliably.
After a cancel, the output of a background subagent that the cancel did
not stop now reaches the client: its tool results, its new tool calls,
and its permission requests.
## The bug
The adapter has one rule for work that a cancel does not stop, as
agentclientprotocol/agent-client-protocol#2308 asks: a background
subagent that still runs (`runsInBackground`). The closing at the cancel
leaves that subagent's tool calls open for their results
(`closedAtCancel`). But the window after the cancel dropped the same
subagent's output, results included:
- **A subagent that completes after the cancel** kept its calls open.
Its commands' results came after the cancel was reported and were
dropped, and since it was not stopped, nothing closed them.
- **A subagent that runs on** after the cancel showed nothing more: new
tool calls were dropped, and its permission requests were denied as the
stopped work's (#1334).
Claude Code currently stops background subagents at an interrupt, as
live runs show, so today this applies only to the output that comes
before the SDK reports a subagent's end. It decides the rest once Claude
Code lets them run.
## The fix
`isRunningBackgroundSubagentOutput` uses the closing's predicate for the
three places the window applies:
- the drop of streamed output;
- the record that `canUseTool` and the v2 preview hook read (#1334);
- the guard of the user/assistant messages.
A subagent's output after the SDK reported its end is still dropped, and
#1336 closes its calls.
## Evidence
**Tests** (`src/tests/incomplete-tools.test.ts`):
- **A command's own result,** for a subagent that completes after the
cancel, reaches the client, for a held turn and with no turn. This
replaces "leaves the command of a subagent that completed after the
cancel as it is", whose fixture sent no result at all.
- **New work after the cancel was reported:** a command's streamed
start, complete message and result reach the client.
- **Permission requests after the cancel:** they are allowed, for a tool
use that streamed first and for one that only its complete message
holds.
- **Unchanged:** a stopped subagent's late result is still dropped, and
its call closed.
- **Mutation checks:** removing each of the three uses, or widening the
predicate to every subagent, fails at least one test.
**Live, Claude Code 2.1.296,** a v1 cancel of a turn held for a
background subagent that runs a command, on a plain client and an RFD
client: Claude Code stopped the subagent, and its command was closed
after the cancelled response, as on `main`. No schema violations. A
subagent that survives a cancel cannot be set up live today.
`npm run check`, build and the full suite (2983 tests) pass, with no
golden changes.
## Not covered
- **A foreground subagent nested in a background one:** its own Agent
call is not backgrounded, so the closing closes its calls at the cancel,
and the window drops its output, both as before. The two stay
consistent.
On v1, when a cancel stops a model cycle that Claude Code started on its
own, the cycle's open tool calls now end. Before, they stayed `pending`
for good.
## The bug
Example, from a live run (Claude Code 2.1.296, a v1 client):
1. A prompt starts a background command, and its turn ends.
2. The command finishes, and Claude Code starts a cycle on its own: it
launches a foreground subagent, which runs a command.
3. The client sends `session/cancel` while no prompt runs.
Claude Code stops both and sends the Agent call's interrupted result
(`user-rejected`). The client never got it, and the Agent call stayed
`pending`. Before #1336, the subagent's command stayed `pending` too.
**Why:** the window after a cancel drops output once the client has been
told that the stopped work ended (#1313). On v1 that report is the
prompt response, read as "no active turn". A cycle never has a turn, so
from the cancel on, everything it sent counted as late output, including
Claude Code's results for its own tool calls. v2 tracks a cycle as
foreground work and closes its calls before `idle cancelled` (#1339). v1
tracked nothing.
## The fix
- **The agent tracks foreground work on every connection.** Only v2
reports it, through the `foreground` option; v1 gets events that do
nothing (`UNREPORTED_FOREGROUND`). The rules for when a cycle starts and
ends are the ones v2 already uses.
- **On v1, a cycle's end is its result or its idle**
(`workEndReported`). Until then, Claude Code's interrupted results reach
the client. At that end, `closeCancelledCycleToolCalls` closes the calls
that got none, as on v2. After it, the window drops what comes, as
before. A v1 turn's rule is unchanged: no active turn.
- **A held turn's follow-up shares the held turn's closing.** v1 holds a
turn for its background subagents, and the held turn's follow-up is a
cycle too, now on v1 as well. When a second cancel settled the held turn
in `cancelTurns` while the cycle's closing was in flight, the two ran
separate passes. The response then came before the cycle's first report,
and on v2 a call could be closed twice. `closeCancelledCycleToolCalls`
now uses the held turn's closing (`Turn.closingCancelledToolCalls`),
which every settle of the turn waits for. The existing test "closes each
tool call once, before the response, when a cancel settles a held turn
that the consumer is closing" caught this.
## Evidence
**Live, Claude Code 2.1.296, the scenario above**, every update checked
against the schema (no violations):
| Client | Agent call | Subagent's command |
|---|---|---|
| v1, before | `pending` | `failed` (closed by #1336) |
| v1, this PR | `failed`, with Claude Code's own `user-rejected` result
| `failed`, closed at the cycle's end |
| v1 RFD client, this PR | the same | the same, in the child's session |
| v2, this PR | `cancelled`, before `idle cancelled` | `cancelled`,
before `idle cancelled` (unchanged) |
A v1 cancel with a queued prompt, followed by the next prompt, still
left no tool call open, and the next prompt's Write asked for its
permission and ran.
**Tests** (`src/tests/incomplete-tools.test.ts`):
- **#1339's test for v1 now asserts the fix:** a cycle's command gets
Claude Code's interrupted result.
- **New:** the live scenario, where the Agent call gets Claude Code's
result and the subagent's command is closed; and a cycle that ends at an
idle with no result, where its call is closed at the idle and Claude
Code's later result is dropped.
- **#1336's "no turn" fixture** launched the background subagents in a
cycle it never ended before the cancel, so v1 now delivered Claude
Code's real result there. The fixture now ends that cycle, which is the
"cancel while nothing runs" case the tests mean.
- **Mutation checks:** each of these fails at least one test:
- the v1 rule without the cycle;
- no cycles on v1;
- no foreground tracking on v1;
- a separate closing for a held turn's follow-up.
`npm run check`, build and the full suite (2979 tests) pass, with no
golden changes.
## Not covered
- A cycle that ends normally with a `tool_use` that Claude abandoned
keeps that call open.
- A subagent that completes after a cancel keeps its calls open.
## Problem
A permission request is abandoned when Claude Code withdraws it: its
`signal` is raced against the client's answer
(`requestPermissionFromClient`), because the SDK only sends
`$/cancel_request` and keeps waiting for the client's reply, which a
client that ignores the cancel never sends. An elicitation is not raced.
A question that the client leaves open after Claude Code cancels it
never settles, and its request stays open on our side:
- **The session** keeps the question in `openUserInputs`
(`withPendingUserInput`) for good. Steering stays non-interrupting
(`priority: later`) for the rest of the session, and on v2 the next turn
starts as `requires_action` though nothing is open.
- **A child** that asked keeps its `openRequests` up. When it is resumed
later, `resumeChild` reports `requires_action` instead of `running`.
Live, on `main` (Claude Code 2.1.296, v2): the main conversation asks
with AskUserQuestion, the client holds the elicitation and ignores
`$/cancel_request`, the user cancels, then sends a second prompt, "Reply
with just the word hi.":
| | States of the second turn |
| --- | --- |
| `main` | `running`, **`requires_action`**, `idle end_turn` (the answer
"hi" streams while it waits) |
| This PR | `running`, `idle end_turn` |
## Change
One helper, `elicitFromClient`, sends the elicitation and races it
against the callback's `signal`, as `requestPermissionFromClient` does.
The three places that send an elicitation for a callback of Claude Code
use it:
- AskUserQuestion (`handleAskUserQuestion`), the one that a child can
send;
- MCP elicitations (`onElicitation`, `handleMcpElicitation`);
- the refusal-fallback dialog (`onUserDialog`, `handleUserDialog`).
They had the same defect, each tracks its request with
`withPendingUserInput`, and their handlers already read an abort as a
cancel (`{ action: "cancel" }`, `{ behavior: "cancelled" }`, "Tool use
aborted"), so only the wait changes.
Nothing else in the flow needs the answer to arrive. After the
elicitation, a question's tool call ends with Claude Code's own
`tool_result`. A url-mode elicitation completes with the SDK's
`elicitation_complete`, not with the answer. A client that does reply to
the cancel still settles it first, to the same outcome as before.
AIR is unchanged, and the golden files do not change.
## Tests
All of them fail without the helper (checked by removing the race, and
then by reverting each of the three call sites alone):
- `acp-agent.test.ts`, "does not wait for … when its client ignores
cancellation": each of the three paths ends as aborted and leaves
nothing open.
- `acp-agent.test.ts`, "uses priority:'now' again once … is withdrawn":
the existing table of every request that waits for the user (permission,
AskUserQuestion, MCP elicitation, refusal dialog, and a child's
permission request and question), with a client that never settles. The
permission rows are controls that already passed. I moved the table into
a constant so both tests use it.
- `acp-agent.test.ts`: a child's question that Claude Code withdraws,
and a SendMessage resume after its end, reports `running`.
- `acp-v2.test.ts`: the live scenario above: the next turn does not
report `requires_action`.
Removal checks: no race in the helper (9 tests fail), the
AskUserQuestion site reverted (5), the MCP site (2), the dialog site
(2).
`npm run check`, `npm run build` and `npm run test:run` pass (2935
tests).
## Not covered
- **A child's question live.** Claude Code 2.1.296 does not give
subagents AskUserQuestion: a general-purpose subagent, and a custom
agent with `tools: AskUserQuestion`, both reported that they could not
ask. So the child's path is covered by the unit test only. The root's
question runs the same `handleAskUserQuestion`, which the live run above
covers.
- **The root session at a cancel.** Now that the question settles at the
abort, the root reports `requires_action`, `running`, `idle cancelled`
for it, as it already does for a permission request (live, v2). That
flicker comes from `syncAwaitingUser`, and is not changed here.
- A signal that already aborted when the elicitation is sent still sends
it, and cancels it at once. A permission request checks first. Nothing
depends on it.
- The URL elicitation of an MCP server's sign-in
(`authenticateMcpServer`) keeps its own race against the authentication,
and is not a tracked request.
Related, and independent: #1337 reports no `running` for a child's
request that a cancel withdraws. The two PRs touch the same call site
and merge cleanly in either order (checked with `git merge-tree`).
## Problem
For a subagents RFD client, a subagent's child session reports
`requires_action` while one of its permission or question requests is
open, and `running` again once its last open request ends (#1322,
`NativeSubagentRuntime.awaitingUser`). A request that ends because the
work was **stopped** is not an answer, but it still reported `running`.
On `main`, with Claude Code 2.1.296, a foreground child whose Bash
permission request is open, and a cancel on the parent:
| What stops the work | States the child reported |
| --- | --- |
| `session/cancel` (v1, and v2 on the child's own stream) | `running`,
`requires_action`, **`running`**, `idle cancelled` |
| `session/close` | `running`, `requires_action`, **`running`**, and
then nothing: a closed session reports no `idle` |
Claude Code's interrupt withdraws the request, so the SDK aborts the
signal of the `canUseTool` call, the adapter sends `$/cancel_request`,
and the request's `finally` reports `running`. The SDK's own report of
the child's end (`task_updated killed`) comes a few ms later (3 to 4 ms
in these runs), so the client shows a child that is being stopped as
working. After a `session/close` nothing corrects it.
## Cause
`awaitingUser` reported `running` whenever the last open request ended,
whatever ended it. A request ends in two ways, the user answers it or
Claude Code withdraws it, and a withdrawal alone does not say whether
the work was stopped. Claude Code also withdraws a request when
something else answers it, and then the child runs on. I ran one such
case, a `PermissionRequest` hook that allows the command after 3 s: the
child worked for 9 more seconds after the withdrawal, and `running` was
right. (The CLI also re-checks a pending ask when its permission context
changes, and withdraws it if that now allows the call. I did not manage
to trigger that: `session/set_mode` to `bypassPermissions` left the
request open in my run.) So "a withdrawn request reports no `running`"
is wrong: that child would sit on `requires_action` for the rest of its
run. Waiting for the child's next update instead does not help either:
in that run the child's first update after the withdrawal came 8 s
later, with the tool's result.
## Change
A request reports no `running` when it was **withdrawn after a cancel
that came while it was open**. Then Claude Code's interrupt withdrew it
as it stopped the child, and the SDK's events report the child `idle`.
- `NativeSubagentRuntime.parentCancelled` (called for `session/cancel`,
and by the teardown of `session/close`) counts the cancels in the RFD
form. It still reports nothing, so #2308 is unchanged: a child that
keeps running keeps its requests and its state.
- `awaitingUser` takes the request's `signal`, which the agent passes
for permission requests and AskUserQuestion (`withChildAwaitingUser`). A
request records the count when it opens. If its signal aborted and the
count changed, its end reports no `running`.
- Everything else is as before: a request that the user answers, also
after the cancel, reports `running`; a withdrawal without a cancel
reports `running`; two overlapping requests report once, when the last
one ends, by how that one ended.
- README: one clause in the work-state bullet of "Subagent sessions".
AIR is unchanged: `awaitingUser` only runs in the RFD form, and the AIR
golden files do not change.
## Evidence
Live runs against Claude Code 2.1.296 (Sonnet), driving `dist/index.js`
over stdio with a client that holds the child's permission request,
validating every update and request against the SDK's JSON schema (0
violations in all runs):
| Run | `main` | This PR |
| --- | --- | --- |
| v1, `session/cancel` | `running`, `requires_action`, `running`, `idle
cancelled` | `running`, `requires_action`, `idle cancelled` |
| v2, `session/cancel` (child's stream) | `running`, `requires_action`,
`running`, `idle cancelled` | `running`, `requires_action`, `idle
cancelled` |
| v1, `session/close` | `running`, `requires_action`, `running` |
`running`, `requires_action` |
| v1, hook allows after 3 s, no cancel | `running`, `requires_action`,
`running`, `idle end_turn` | the same |
Tests (all fail without the rule, as checked by removing it):
- `native-subagents.test.ts`: the cancel withdrawal (and the child's
`idle cancelled` after it); a withdrawal without a cancel (the hook
case, which a simpler "abort means stopped" rule fails); a request that
outlives a cancel and is answered later; a cancel that came before the
request opened; two overlapping requests, in each order.
- `acp-agent.test.ts`: through `canUseTool`, with `agent.cancel` and
`agent.closeSession` aborting the request as Claude Code does, and the
hook case.
- `acp-v2.test.ts`: the child's own `state_update` stream and the
parent's copy.
Removal checks, each run against the three test files: no rule (6 tests
fail), the cancel not counted (6), the agent not passing the signal (3:
agent cancel and close, v2), and the simple "any withdrawal" rule (3:
the hook cases).
`npm run check`, `npm run build` and `npm run test:run` pass (2935
tests; the scenario golden files do not change).
## Not covered
- **A stream end without a cancel.** If Claude Code exits by itself, the
SDK's cleanup aborts every request before the consumer reads the end of
the stream, and nothing at that moment tells it from a hook's
withdrawal. Live (`kill -9` of the CLI): `running`, then `idle`, 1 ms
apart. The session is dead right after. A rule for it would be a timing
one: report `running` for a withdrawal with no cancel one event-loop
turn later, so that `finishAll` goes first. I tried it (`await new
Promise((resolve) => setImmediate(resolve))` before the check in
`awaitingUser`'s `finally`): the `kill -9` run then reports `running`,
`requires_action`, `idle`, and the hook run still reports `running` 1 ms
after the withdrawal. I did not include it. It only works when the end
of the stream reaches `finishAll` in the same turn (a worker shutdown
publishes its failure notice first, for one), and it hides an ordering
assumption about the consumer. Your call.
- **Claude Code stopping a child on its own** (the model's TaskStop)
while its request is open: the same shape, no cancel.
- **The root session on v2** has the same flicker for its own request:
`requires_action`, `running`, `idle cancelled` (live, v2). It comes from
`syncAwaitingUser`, not from this runtime, and is not changed here.
- A background child that outlives a cancel and whose still-open request
a hook then withdraws would report no `running`. Claude Code stops
background children at an interrupt today, so it does not arise.
Related, and independent: a child's AskUserQuestion is not abandoned on
an abort when its client ignores `$/cancel_request` (#1338). The two PRs
touch the same call site and merge cleanly in either order (checked with
`git merge-tree`).
## Problem
On ACP v2, a model cycle that Claude Code starts on its own, such as its
follow-up after a background command finished, is foreground work:
`state_update` `running`, then `idle`. When a cancel stops such a cycle,
the tool calls that it left open can stay `pending` after `idle`
`cancelled`.
Claude Code answers each tool of the main conversation with an
interrupted result, and the adapter delivers it before the cycle's
`idle`. It sends nothing for what a foreground subagent of the cycle
ran, nor for a tool call that Claude abandoned before it ran. No turn
settles at the cycle's end, so `closeCancelledToolCalls` (#1327, #1221)
never runs for it.
Example, live (Claude Code 2.1.296, Sonnet): a background `sleep 6` ends
its turn. When it finishes, Claude Code's follow-up runs a foreground
subagent, which runs a 60 s command, and the client cancels while it
runs:
```
root state_update running <- Claude Code's own cycle
child tool_call gKT4K4 (the subagent's command) pending
... session/cancel ...
root tool_call_update PLh9rB (Agent call) cancelled <- Claude Code's result
child state_update idle cancelled
root state_update idle cancelled
child gKT4K4: still pending, for good
```
## Change
- `closeCancelledCycleToolCalls` ends the open tool calls with the
cancelled report before the cycle's end is reported, at the cycle's
result and at the idle that ends it when no result comes. The calls are
the ones the turn's closing takes: every open call except those of a
background subagent that still runs.
- It applies when a cancel is in effect (`session.cancelled`) and the
cycle is the foreground work (`runsAutonomousCycle`). A turn that took
the cycle over closes its own calls when it settles.
- The loop of `closeCancelledToolCalls` is now `closeOpenToolCalls`, and
its filter is named `closedAtCancel`. These two hunks are the same as in
#1336, so that the PRs merge in any order.
- The follow-up cycle of a turn that v1 holds for its background
subagents is a cycle on v2, and its closing now comes before its `idle`.
It came at the held turn's settle, after it.
## Evidence
**Tests** (6 new):
- `acp-v2.test.ts`: the command of the cycle's foreground subagent ends
`cancelled` in the child's session, after the child's idle and before
the cycle's, once; a tool call that Claude abandoned in the cycle ends
before `idle` `cancelled`; so does one at the idle that ends a cycle
without a result; the follow-up cycle of a held turn closes before
`idle` `cancelled`, and a background subagent that keeps running keeps
its command open; a cycle that the SDK aborted without a cancel is left
to Claude Code's result, which still reaches the client.
- `incomplete-tools.test.ts`: on v1, which reports no cycle, a cancelled
cycle's tool call is not closed (see below).
**Removal checks.** Each of these fails at least one test: no closing at
the result (3), none at the idle (1), closing a cycle that no cancel
stopped (1), without the cycle being the foreground work (2), closing a
running background subagent's calls (1), closing after the cycle's end
is reported (3), the turn's closing taking those calls too (5).
**Live**, every update validated against the SDK's v2 JSON schema (0
violations):
| cancel while Claude Code's cycle runs | `main` | this PR |
| --- | --- | --- |
| a foreground subagent's command | `pending` in the child's session,
after the root's `idle cancelled` | `cancelled` in the child's session,
after the child's idle and before the root's |
| a command of the cycle itself | Claude Code's result, `cancelled`,
before `idle` | the same, unchanged |
`npm run check`, `npm run build` and `npm run test:run` (2930 tests)
pass. No golden file changes. With #1335 and #1336 merged into it, in
any of the six orders, the branches merge without conflicts and all 2948
tests pass.
## Not covered, and a decision for the maintainer
- **v1.** Nothing tracks a cycle on v1, and with no turn active every
result after the cancel is dropped, Claude Code's for the cycle's own
commands too. In the same live run on v1 the Agent call and the
subagent's command both stay `pending`. Closing at the cycle's cancelled
result there would end both, with a made-up status for the Agent call
too. I left it: it changes what v1 clients see for a cancel while idle,
and one existing test (a held turn that the consumer closes while a
cancel settles it inline) fails once the cycle check is removed, so it
is not only a gate. It also touches the post-cancel window of #1061,
which another change owns.
- A cycle that ends without a cancel keeps an abandoned `tool_use` open.
`settleActive` closes that for a turn, and no turn owns a cycle.
- A session that ends or closes with a cycle running ends the cycle as
cancelled without closing its calls.
## Problem
After `session/cancel`, the tool call of a **background** subagent's
command stays `pending` for good when no turn is left to settle.
Example, live (Claude Code 2.1.296, Sonnet): a background subagent runs
`python3 -c "import time; time.sleep(60)"`, and the client cancels while
it runs. Either the session is idle, or v1 holds the prompt open for the
subagent and the cancel settles it at once. Claude Code's interrupt
stops the subagent: the SDK reports `task_updated` `killed` and
`task_notification` `stopped`, and the RFD form reports the child `idle`
`cancelled`. The command's call is never closed, in the root session or
in the child's.
## Cause
#1327 closes a cancelled turn's open tool calls when the turn settles
(`closeCancelledToolCalls`), and leaves a background subagent's calls
open, because the interrupt may not stop it. Here the turn is already
settled (the cancel settled the held turn before the interrupt) or there
is none, and the stop comes after that. Nothing closes the calls then.
Claude Code does send the command's interrupted result. It comes after
the stop reports, so it is output after the work's end, and the
`session.cancelled` check of the user/assistant case drops it, as it
drops everything after that. The raw stream, in the order Claude Code
sends it:
```
task_updated agent patch killed
task_notification agent stopped
task_notification the command's task stopped
user (ptu=agent) tool_result for the command, is_error <- dropped
```
## Change
- **A subagent's stop closes its open tool calls**
(`closeStoppedSubagentToolCalls`), at `task_notification` `stopped` and
at `task_updated` `killed`, after `finishTask` has reported the child
idle. It closes the calls whose recorded parent is that subagent's Agent
call (`Session.toolCallParents`) with the cancelled report that #1327
sends, naming the subagent so that every client form routes it like the
call's other updates.
- **Only where nothing else will end the calls**: a cancel is in effect
(`session.cancelled`), and the client was told that the work ended
(`workEndReported`: the prompt response on v1, `idle` on v2). While the
work runs, a stopped subagent's calls get Claude Code's own result or
`closeCancelledToolCalls` at the work's end, as before.
- The loop of `closeCancelledToolCalls` is now `closeOpenToolCalls`,
which takes the filter for the calls: the turn's closing, named
`closedAtCancel`, skips a running background subagent's calls, and this
closing takes one subagent's. These hunks are the same as in #1339,
which closes the calls of a cycle that Claude Code started, so that the
PRs merge in any order.
- README: one sentence on when such a call ends.
Nothing is closed twice: a closing forgets the call before it reports
it, so a later closing, and the result that Claude Code sends after the
stop, find nothing. The cancel settles a held turn and closes its calls
before it interrupts Claude Code, so the stop reports always come after
that closing.
## Per client form
- **v1 without subagents:** the call goes to the root session, after the
response when the cancel settled a held turn.
- **RFD:** the call ends in the child's session right after the child's
`idle` `cancelled`, as #1327 does at a turn's settle.
- **AIR:** the cancel already ended every child, so the runtime drops
the report (`ignoring late update for terminal subagent`). The call's
state is released, which it was not before.
- **v2:** as RFD. The root reports nothing, since it had no work.
## Evidence
**Tests** (10 new):
- `incomplete-tools.test.ts`: for a held turn and for no turn, the
command ends once with the cancelled report, after the cancel's
response, and the other subagent's command stays open; each of the two
reports ends it alone; a subagent that completed after the cancel is
left alone; one that stopped without a cancel, and one that stopped
while the work still runs, get Claude Code's result, not a made-up
report.
- `acp-agent.test.ts`: the RFD form (the child's session, after its
idle, after the response) and AIR (nothing reaches the ended child).
- `acp-v2.test.ts`: the child's command ends `cancelled` in its session
after its `idle cancelled`, and the root reports nothing more.
**Removal checks.** Each of these fails at least one test: no closing at
the notification (2), none at the patch (1), closing without a cancel
(1), before the work's end is reported (2), at any status of the
notification (1), of the patch (1), every subagent's calls (4), calls of
another parent (7), the turn's closing no longer skipping a running
background subagent (7), the report without the subagent's name (7), and
the closing before the child reports idle (2).
**Live**, 60 s command in a background subagent, cancel 4 s after its
permission request was answered, every update validated against the
SDK's JSON schema (0 violations):
| client | cancel while | `main` | this PR |
| --- | --- | --- | --- |
| v1, no capabilities | the held turn waits for the subagent |
`pending`, response `cancelled` | `failed` 4 ms after the response |
| v1, no capabilities | no turn runs | `pending` | `failed` after the
SDK's first stop report |
| v1, RFD | no turn runs | `pending` in the child's session | `failed`
in the child's session, after its `idle` `cancelled` |
| v1, RFD | the held turn | not run on `main` | `failed` in the child's
session, after the response |
| v1, AIR | the held turn | not closed | report dropped by the runtime,
state released |
| v2 | root idle | `pending` in the child's session | `cancelled` in the
child's session, after its `idle cancelled` |
`npm run check`, `npm run build` and `npm run test:run` (2934 tests)
pass. No golden file changes. With #1335 and #1339 merged into it, in
any of the six orders, the branch merges without conflicts and all 2948
tests pass.
## For the maintainer
- **Closing, not delivering.** Claude Code 2.1.296 sends the result, so
delivering it after the work's end would also end the call, with Claude
Code's text. I closed instead: 2.1.293 sent none for a subagent's call
(#1327), the result comes after the response in the window #1313 closes,
and closing works for both. The cost is the made-up text ("The turn was
cancelled before this tool call returned a result.") in place of Claude
Code's.
## Not covered
- A background subagent that the interrupt does not stop keeps running,
and its calls stay open. Its output after a cancel is dropped until the
next prompt, as before.
- A subagent that completes after a cancel: Claude Code's results for
its calls were dropped, and the calls stay open. Nothing says they were
cancelled, so none is reported. Delivering those results would end them.
- A subagent that a SendMessage resumed: its calls carry the id of the
call that launched it, while the registry holds the SendMessage id.
`runsInBackground` has the same limit.
- The calls of a cycle that Claude Code started on its own are #1339.
## Problem
A tool call that ends without a tool result is closed by a report that
only sets its status (`AcpToolCallRenderer.unfinished`). That happens
after `session/cancel`, for a subagent's command (Claude Code sends no
result for it) or a call that Claude abandoned, and when a turn ends
with a call that has no result (`closeUnfinished` in `settleActive`).
A client that renders terminals (the `terminal_output` /
`terminal_output_delta` extension, and the display terminals of ACP v2)
holds a terminal for a Bash command, which its `tool_call` started with
`_meta.terminal_info`. The closing report did not end it, so the call
shows as ended next to a terminal that never exits.
Example, live (Claude Code 2.1.296, Sonnet): a foreground Agent call
whose subagent runs `python3 -c "import time; time.sleep(45)"`, and
`session/cancel` while it runs. Claude Code answers the Agent call and
sends nothing for the subagent's command, so the adapter closes that
call itself:
- v1 client with `_meta.terminal_output`: `tool_call_update` `failed`,
with no `terminal_exit`.
- v2 client: `terminal_update` with the command, then `tool_call_update`
`cancelled`, and no `terminal_update` that carries an exit.
## Change
- `closeToolCall` is the one function that every closing report goes
through (the cancelled-turn closing and the end-of-turn closing today,
and any closing added later). It now also ends the call's terminal, in
the same update, as the result of a command does. It reads the tool from
the tool use cache before it drops the entry.
- The closings that #1336 and #1339 add go through `closeToolCall` too,
so they end the terminal as well once merged.
- `AcpToolCallRenderer.terminalExit` decides whether the call has a
terminal. It uses the rule that `toolCall` uses to start one, a command
on a client that renders terminals, which is now one private method
(`hasTerminal`) that `toolCall`, `toolUseContent` and `terminalExit`
share.
- The exit code is unknown, since the command ended without a result:
`exit_code: null`, as `endBackgroundTerminal` sends for a background
command. AIR always gets a number and reads 1 for a command that did not
succeed (#1252), so it gets 1. A v2 client gets `terminal_update` with
an empty `exitStatus`.
- `docs/air-extensions.md`: one line in the terminal conventions.
## Evidence
**Tests** (8 new):
- `incomplete-tools.test.ts`: the cancel's closing of a subagent's
command ends its terminal, still names the subagent, and sends
`exit_code: null`; AIR gets `exit_code: 1`; a client without terminals
gets no exit; a subagent's `Read` gets none; a command that ran but got
no result by the end of the turn gets the exit; so does one that Claude
abandoned before it ran.
- `tools.test.ts`: `terminalExit` for Bash, PowerShell, v2, AIR, a
client without terminals, and tools that are not commands.
- `acp-v2.test.ts`: the stopped subagent's terminal exits in the child's
session, after the command's terminal started and before the root's
`idle cancelled`, and the call ends `cancelled`.
**Removal checks.** Each of these fails at least one test: no exit in
`closeToolCall` (5), AIR gets null (2), an exit for a client without
terminals (2), an exit for a tool that is not a command (3), another
terminal id (5), the exit replacing the parent meta (1), the tool read
after the cache entry is dropped (5).
**Live**, each update validated against the SDK's JSON schema (v1
`SessionNotification`, v2 `session/update`), 0 violations. The Agent
call and the subagent's command from the example, cancelled 4 s after
the command's permission request was answered:
| client | `main` | this PR |
| --- | --- | --- |
| v1, `_meta.terminal_output` | closing report `failed`, no
`terminal_exit` | the same update carries `terminal_exit {exit_code:
null, signal: null}` |
| v1, AIR with `terminal_output` | not run on `main` (same code path) |
`terminal_exit` with `exit_code: 1` |
| v2 | `cancelled`, no terminal update | `terminal_update` with
`exitStatus: {}`, then `cancelled`, before the root's `idle cancelled` |
`npm run check`, `npm run build` and `npm run test:run` (2932 tests)
pass. No golden file changes. With #1336 and #1339 merged into it, in
any of the six orders, the branch merges without conflicts and all 2948
tests pass.
## Not covered
- A call that only a permission request announced, whose tool use never
streamed before it was closed, has no entry in the tool use cache. Its
tool is unknown here, so its terminal stays open. This is the lookup
that `AsyncTaskRuntime` uses too (`toolUseCache`, then
`resolvedToolNames`). Covering it needs the tool name where the
permission request emits the call.
- The fallback for a tool result without a tool use
(`toAcpNotifications`) still reports the status only, with no exit.
- The end-of-turn closing is covered by a test only: Claude Code does
not end a turn with an unanswered call on demand.
Closes#1061.
## Where #1061 stands
The incident in #1061 was tool starts streamed after `session/cancel`
that never got a final status, so a client's ledger of open tool calls
kept them forever. Since that report:
- **#1313** drops streamed text, thinking and tool calls of the stopped
work once the client has been told that the work ended (the cancelled
response on v1, `idle cancelled` on v2), while the window after the
cancel is open.
- **#1327** and **#1221** close the tool calls that streamed before that
report, before it is sent.
So a late streamed tool start no longer reaches the client. This PR adds
regression tests for that, and closes the one path that still produced
such a tool call. #1313 named it as not changed: a tool call that the
stopped work creates outside the stream.
## The remaining path
Example: the user sends a second prompt while the first runs, then
cancels. Claude Code had already taken the second prompt off its queue,
so it still runs it, and its answer writes a file. The consumer drops
the stream and the messages of that answer (#1313). But Claude Code asks
for the Write's permission on its control channel:
- **`canUseTool`** created the tool call (`ensureToolCallEmitted`) and
sent the permission request. AskUserQuestion's elicitation goes the same
way.
- **The v2 PreToolUse preview hook** created the tool call with the
Write's patch.
The tool's result is dropped too, so that tool call never ended: the
ghost of #1061, now for tools that need a permission.
## The fix
- **The consumer records each tool use it reaches,** at its streamed
start or, for one that did not stream, at its complete message, with
whether it dropped it. The condition is the stream's existing one, now
`dropsStoppedWorkOutput`: the client was told that the stopped work
ended, and the window after the cancel is open.
- **`canUseTool` denies a dropped tool use without showing anything:**
no tool call, no permission request, no elicitation. The model gets "The
user cancelled this prompt." The **preview hook** sends nothing for it.
- **The control channel runs ahead of the consumer,** which is why #1313
left this open. While a cancel's window may be open, `canUseTool` and
the hook wait until the consumer reaches the tool use. Claude Code
streams the tool use before it asks, so the consumer is usually there
within a few ticks. Example: the next prompt's tool asks while the
session still looks cancelled, because the consumer has not reached that
prompt's echo yet. The wait sees the consumer reach the echo, which
closes the window, and then the tool use, which it shows, so the request
goes out.
- **The wait is bounded:** 2 s, or until Claude Code withdraws the
request. The stream never shows some tool uses, such as
SandboxNetworkAccess's, and those then go out as before.
- **Without a cancel, nothing changes,** not even timing: the check
answers synchronously and adds no tick before the permission request.
## Evidence
**Tests** (`src/tests/acp-agent.test.ts`, "output after a cancel";
`src/tests/acp-v2.test.ts`):
- An abandoned prompt's Write: nothing reaches the client, and the tool
is denied. Claude Code asks before the consumer reaches the tool use,
between its streamed start and its message, after its message, or for a
tool use that did not stream. The same on v2, with Claude Code running
the registered PreToolUse hooks and then `canUseTool`.
- The next prompt's tool, asked while the window still looks open: its
request goes out once the consumer reaches it.
- A tool use the stream never shows: the wait ends when the request is
withdrawn (before it asked, or while it waits), or after the bound, and
then the request goes out.
- **Mutation checks:** removing each of the 11 rules fails at least one
test. That covers the `canUseTool` check, the hook check, the wait,
waiting instead of denying, the stream record, the message record, the
stream's dropped flag, the abort exit, the aborted-signal guard, the
timeout, and the synchronous answer.
**Live, against Claude Code** (v1 and v2, `default` permission mode,
every update checked against the schema):
- After a cancel, the next prompt's Writes asked for their permissions
at once and ran. Nothing was denied, and no tool call stayed open; on v2
the turn went `idle cancelled`, `running`, `requires_action`, `running`,
`idle end_turn`. No schema violations.
- The abandoned prompt's race did not happen live: Claude Code folded
the queued prompt into the cancelled request, and the cancel stopped
both. #1313 could not reproduce it either. The tests follow the order a
direct CLI probe recorded for #1309.
`npm run check`, build and the full suite (2931 tests) pass, with no
golden changes.
## Not covered
- On CLIs without `request_marker_lists_v1`, the window still lasts
until the next prompt's echo, as before.
- A tool that runs without a permission, in `acceptEdits` or
`bypassPermissions` mode, still runs for an abandoned prompt. Nothing of
it reaches the client, since its output is dropped. Stopping such tools
would need the adapter to block tools it is not asked about, which this
PR does not do.
After `session/load` or `session/resume`, Claude Code can resume an
agent that ran before the reload: a SendMessage to it runs it again from
its transcript. The adapter did not know that agent, so it was never
exposed, and its activity was dropped. Now it runs in its session from
before, the agent id, for every subagents RFD client: v1 clients that
declare `subagents` and are not AIR, and every v2 client.
## What Claude Code sends
From a live run, after a resume in a new adapter process:
- `task_started` with the agent id, the **SendMessage** call's id as
`tool_use_id`, and the message as `prompt`.
- The resumed run's messages under `parent_tool_use_id` = the agent's
**original Agent launch id**, from before the reload (the `toolUseId` in
`subagents/agent-<id>.meta.json`), not the SendMessage id.
- The SendMessage result with `resumedAgentId`, then `task_updated` /
`task_notification` as usual.
The runtime found no child for the agent id, and a SendMessage call
establishes no parent, so the child waited for a parent that never came
and was withdrawn when it ended.
## What changes
- **The signal:** an agent that the runtime does not know, resumed by a
SendMessage call that it saw. A new launch never counts: its
`task_started` names an Agent or Task call.
- **`subagentLineage`** (`subagent-history.ts`) reads the agent and its
ancestors from the session's history, root first. The metadata names
each launch call but not who made it, so a launch's parent is the
session whose transcript has the call: the root's, or an agent's. That
is the rule the replay (#1328) uses, so live restore and replay agree.
An agent or ancestor the history cannot place gives an empty lineage.
- **The runtime** (`NativeSubagentRuntime.restore`) registers the agent
and its ancestors under their agent ids and their launch ids. Then it
announces, parent before child, each ancestor that the client was not
told about in this connection, as the RFD requires before the agent's
traffic. An ancestor is announced with no work state, since nothing says
that it runs. Then the agent, as `running`. From there the resume goes
through the existing path (#1321): the SendMessage text is the child's
`session_message`, and its end is `idle`.
- **Unchanged:** an agent the history cannot place stays unexposed, as
the RFD forbids guessing a parent.
- **Load and replay:** after `session/load`, the replay has already
announced the agent. The live resume announces it once more, as
`running`, which repeats an association the client has (the RFD allows
it).
- **Refactor:** `subagentLaunchIds` moves from `acp-agent.ts` to
`subagent-history.ts`, so the replay and the lineage find launches the
same way.
## Evidence
**Live, against Claude Code, with every update checked against the
schema** (no violations):
| Run | Result |
|---|---|
| v1, `session/resume`, SendMessage to a root-level agent |
`subagent_update` running under its old id, the message from the root,
its `PING` in its own session, `idle end_turn` |
| v1, `session/load`, same | The replay announces it; the live resume
after the response runs in the same session |
| v1, `session/resume`, root → coordinator → echoer, SendMessage from
the root to echoer | coordinator announced under the root with no state,
then echoer under coordinator as running, its run in its session, its
`idle` on coordinator |
| v2, `session/resume` without replay, same nested session | as above;
echoer also reports `running` and `idle` as its own `state_update`,
coordinator has none |
Before this change, the first run showed no `subagent_update` at all,
and the child's `PING` was dropped.
**Tests:**
- `native-subagents.test.ts`: restore under the agent id, with routing
by the launch id; ancestors first and with no state; an ancestor
announced once for two agents; output that waited is delivered; restore
at the SendMessage result alone; an agent the history cannot place or
read stays unexposed; no history read for a new launch or a known child.
- `subagent-history.test.ts` (real transcripts on disk): a root-level
agent, a nested agent next to a sibling, an agent whose launch no
transcript has, a nested agent whose ancestor no transcript placed, an
agent without metadata.
- `acp-agent.test.ts`: the agent's own runtime restores an agent from a
history on disk, from the stream Claude Code sends.
- **Mutation checks:** removing each of the 12 rules fails at least one
test.
`npm run check`, build and the full suite (2922 tests) pass, with no
golden changes.
## Not covered
- **AIR** is unchanged: this PR changes only the RFD form, so on AIR an
agent from before a reload still stays unexposed.
- **A fork** cannot resume an agent of the original session, since the
SDK's `forkSession` copies no `subagents/` history.
Bumps the minor group with 14 updates:
| Package | From | To |
| --- | --- | --- |
|
[@anthropic-ai/claude-agent-sdk](https://github.com/anthropics/claude-agent-sdk-typescript)
| `0.3.293` | `0.3.296` |
|
[@anthropic-ai/sdk](https://github.com/anthropics/anthropic-sdk-typescript)
| `0.132.1` | `0.133.0` |
|
[@types/node](https://github.com/DefinitelyTyped/DefinitelyTyped/tree/HEAD/types/node)
| `26.6.4` | `26.6.5` |
| [prettier](https://github.com/prettier/prettier) | `3.9.9` | `3.9.10`
|
| @anthropic-ai/claude-agent-sdk-darwin-arm64 | `0.3.293` | `0.3.296` |
| @anthropic-ai/claude-agent-sdk-darwin-x64 | `0.3.293` | `0.3.296` |
| @anthropic-ai/claude-agent-sdk-linux-arm64 | `0.3.293` | `0.3.296` |
| @anthropic-ai/claude-agent-sdk-linux-arm64-musl | `0.3.293` |
`0.3.296` |
| @anthropic-ai/claude-agent-sdk-linux-x64 | `0.3.293` | `0.3.296` |
| @anthropic-ai/claude-agent-sdk-linux-x64-musl | `0.3.293` | `0.3.296`
|
| @anthropic-ai/claude-agent-sdk-win32-arm64 | `0.3.293` | `0.3.296` |
| @anthropic-ai/claude-agent-sdk-win32-x64 | `0.3.293` | `0.3.296` |
| [express](https://github.com/expressjs/express) | `5.2.1` | `5.3.0` |
| [vite](https://github.com/vitejs/vite/tree/HEAD/packages/vite) |
`8.3.3` | `8.3.4` |
Updates `@anthropic-ai/claude-agent-sdk` from 0.3.293 to 0.3.296
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/anthropics/claude-agent-sdk-typescript/releases">@anthropic-ai/claude-agent-sdk's
releases</a>.</em></p>
<blockquote>
<h2>v0.3.296</h2>
<h2>What's changed</h2>
<ul>
<li>Added <code>claude_code_version</code> to the
<code>initialize</code> control response so clients know the CLI version
before the first turn</li>
<li>Added <code>autoCompactWindow</code> to
<code>AgentDefinition</code>, so a subagent can auto-compact earlier
than the main conversation's window</li>
<li>Fixed the <code>sandbox</code> option discarding an inline
<code>settings.sandbox</code> block: the two now merge, the option's
values win, and deny and credential lists from both sides are
combined</li>
<li>Changed the default limit on MCP tool descriptions sent up front and
on MCP server instructions, in-process SDK servers included, from 2,048
to 4,096 characters</li>
<li>Changed permission answers that arrive after a restart to be parsed
like live ones: over 4,096 <code>updatedPermissions</code> entries count
as a denial, and a malformed list is ignored as a whole</li>
<li>Updated to parity with Claude Code v2.1.296</li>
</ul>
<h2>Update</h2>
<pre lang="sh"><code>npm install @anthropic-ai/claude-agent-sdk@0.3.296
# or
yarn add @anthropic-ai/claude-agent-sdk@0.3.296
# or
pnpm add @anthropic-ai/claude-agent-sdk@0.3.296
# or
bun add @anthropic-ai/claude-agent-sdk@0.3.296
</code></pre>
<h2>v0.3.295</h2>
<h2>What's changed</h2>
<ul>
<li>Added <code>overageEnabled</code> to <code>SDKRateLimitInfo</code>:
on usage-limit warnings, whether the account has extra usage turned
on</li>
<li>Fixed an MCP server added with <code>mcp_set_servers</code>
sometimes keeping an outdated tool list when another server in the same
request connected later</li>
<li>Fixed assistant text blocks losing their <code>citations</code> in
streamed responses</li>
<li>Fixed Claude being told "disabled by the user" about an
in-process MCP server that was switched off with
<code>toggleMcpServer()</code></li>
<li>Fixed <code>rate_limit_event</code> with status
<code>allowed_warning</code> omitting <code>overageStatus</code>,
<code>overageResetsAt</code> and <code>overageDisabledReason</code>,
which <code>allowed</code> and <code>rejected</code> events already
carry</li>
<li>Changed MCP tool descriptions the model loads through tool search,
including those from in-process SDK servers, to be cut at 16,384
characters instead of 2,048</li>
<li>Changed a permission answer whose <code>updatedPermissions</code>
holds over 4,096 updates, rules and directories to count as a
denial</li>
<li>Changed <code>tool_result_meta[].non_execution_kind</code> to be
absent when a mod withheld the result of a tool that ran without error;
it was <code>permission-rule</code></li>
<li>Changed <code>pasted_content</code> on user messages to be ignored
when it holds over 1,000 entries and blocks in all</li>
<li>Changed how the SDK passes option values to Claude Code: the values
of its named options are now sent in the same argument as their flag
(<code>--flag=value</code>)</li>
<li>Changed <code>tool_use_result</code> for MCP Apps tools:
<code>structuredContent</code> or <code>_meta</code> over 8,388,608 JSON
characters is left off, and <code>_meta.ui</code> with no
<code>ui://</code> resource no longer lifts the ordinary caps</li>
<li>Changed <code>tool_use_result</code> for MCP tools: when a long
result is saved to a file, or cut because it could not be, the text kept
past 500,000 characters is dropped, with a note of how much</li>
<li>Changed <code>tool_use_result</code> for MCP tools: a result
<code>_meta</code> over 1,048,576 JSON characters is left off, except
for SDK-server tools; so is text blocks' <code>_meta</code> that totals
over 65,536</li>
<li>Updated to parity with Claude Code v2.1.295</li>
</ul>
<h2>Update</h2>
<pre lang="sh"><code>npm install @anthropic-ai/claude-agent-sdk@0.3.295
# or
yarn add @anthropic-ai/claude-agent-sdk@0.3.295
# or
pnpm add @anthropic-ai/claude-agent-sdk@0.3.295
# or
bun add @anthropic-ai/claude-agent-sdk@0.3.295
</tr></table>
</code></pre>
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/anthropics/claude-agent-sdk-typescript/blob/main/CHANGELOG.md">@anthropic-ai/claude-agent-sdk's
changelog</a>.</em></p>
<blockquote>
<h2>0.3.296</h2>
<ul>
<li>Added <code>claude_code_version</code> to the
<code>initialize</code> control response so clients know the CLI version
before the first turn</li>
<li>Added <code>autoCompactWindow</code> to
<code>AgentDefinition</code>, so a subagent can auto-compact earlier
than the main conversation's window</li>
<li>Fixed the <code>sandbox</code> option discarding an inline
<code>settings.sandbox</code> block: the two now merge, the option's
values win, and deny and credential lists from both sides are
combined</li>
<li>Changed the default limit on MCP tool descriptions sent up front and
on MCP server instructions, in-process SDK servers included, from 2,048
to 4,096 characters</li>
<li>Changed permission answers that arrive after a restart to be parsed
like live ones: over 4,096 <code>updatedPermissions</code> entries count
as a denial, and a malformed list is ignored as a whole</li>
<li>Updated to parity with Claude Code v2.1.296</li>
</ul>
<h2>0.3.295</h2>
<ul>
<li>Added <code>overageEnabled</code> to <code>SDKRateLimitInfo</code>:
on usage-limit warnings, whether the account has extra usage turned
on</li>
<li>Fixed an MCP server added with <code>mcp_set_servers</code>
sometimes keeping an outdated tool list when another server in the same
request connected later</li>
<li>Fixed assistant text blocks losing their <code>citations</code> in
streamed responses</li>
<li>Fixed Claude being told "disabled by the user" about an
in-process MCP server that was switched off with
<code>toggleMcpServer()</code></li>
<li>Fixed <code>rate_limit_event</code> with status
<code>allowed_warning</code> omitting <code>overageStatus</code>,
<code>overageResetsAt</code> and <code>overageDisabledReason</code>,
which <code>allowed</code> and <code>rejected</code> events already
carry</li>
<li>Changed MCP tool descriptions the model loads through tool search,
including those from in-process SDK servers, to be cut at 16,384
characters instead of 2,048</li>
<li>Changed a permission answer whose <code>updatedPermissions</code>
holds over 4,096 updates, rules and directories to count as a
denial</li>
<li>Changed <code>tool_result_meta[].non_execution_kind</code> to be
absent when a mod withheld the result of a tool that ran without error;
it was <code>permission-rule</code></li>
<li>Changed <code>pasted_content</code> on user messages to be ignored
when it holds over 1,000 entries and blocks in all</li>
<li>Changed how the SDK passes option values to Claude Code: the values
of its named options are now sent in the same argument as their flag
(<code>--flag=value</code>)</li>
<li>Changed <code>tool_use_result</code> for MCP Apps tools:
<code>structuredContent</code> or <code>_meta</code> over 8,388,608 JSON
characters is left off, and <code>_meta.ui</code> with no
<code>ui://</code> resource no longer lifts the ordinary caps</li>
<li>Changed <code>tool_use_result</code> for MCP tools: when a long
result is saved to a file, or cut because it could not be, the text kept
past 500,000 characters is dropped, with a note of how much</li>
<li>Changed <code>tool_use_result</code> for MCP tools: a result
<code>_meta</code> over 1,048,576 JSON characters is left off, except
for SDK-server tools; so is text blocks' <code>_meta</code> that totals
over 65,536</li>
<li>Updated to parity with Claude Code v2.1.295</li>
</ul>
<h2>0.3.294</h2>
<ul>
<li>Updated to parity with Claude Code v2.1.294</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="85d8f8e077"><code>85d8f8e</code></a>
chore: Update CHANGELOG.md</li>
<li><a
href="da321bbe62"><code>da321bb</code></a>
chore: Update CHANGELOG.md</li>
<li><a
href="799dc78749"><code>799dc78</code></a>
chore: Update CHANGELOG.md</li>
<li>See full diff in <a
href="https://github.com/anthropics/claude-agent-sdk-typescript/compare/v0.3.293...v0.3.296">compare
view</a></li>
</ul>
</details>
<br />
Updates `@anthropic-ai/sdk` from 0.132.1 to 0.133.0
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/anthropics/anthropic-sdk-typescript/releases">@anthropic-ai/sdk's
releases</a>.</em></p>
<blockquote>
<h2>sdk-v0.133.0</h2>
<h3>Features</h3>
<ul>
<li><strong>api:</strong> add types for the Chat and Cowork unified
analytics metrics</li>
<li><strong>api:</strong> add workflows, multiagent configuration and
thread status filtering to Managed Agents</li>
</ul>
<h3>Chores</h3>
<ul>
<li><strong>internal:</strong> remove the next branch rule from
CLAUDE.md</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/anthropics/anthropic-sdk-typescript/blob/main/CHANGELOG.md">@anthropic-ai/sdk's
changelog</a>.</em></p>
<blockquote>
<h2><a
href="https://github.com/anthropics/anthropic-sdk-typescript/compare/sdk-v0.132.1...sdk-v0.133.0">0.133.0</a>
(2026-10-09)</h2>
<h3>Features</h3>
<ul>
<li><strong>api:</strong> add types for the Chat and Cowork unified
analytics metrics</li>
<li><strong>api:</strong> add workflows, multiagent configuration and
thread status filtering to Managed Agents</li>
</ul>
<h3>Chores</h3>
<ul>
<li><strong>internal:</strong> remove the next branch rule from
CLAUDE.md</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="2979ed5cef"><code>2979ed5</code></a>
release: . 0.133.0</li>
<li><a
href="8486d9bd22"><code>8486d9b</code></a>
Merge pull request <a
href="https://redirect.github.com/anthropics/anthropic-sdk-typescript/issues/908">#908</a>
from anthropics/synced/published</li>
<li><a
href="e0995e4bde"><code>e0995e4</code></a>
feat(api): add workflows, multiagent configuration and thread status
filterin...</li>
<li><a
href="31eb3bea68"><code>31eb3be</code></a>
codegen metadata</li>
<li><a
href="5127b320bd"><code>5127b32</code></a>
codegen metadata</li>
<li><a
href="f702a46d87"><code>f702a46</code></a>
codegen metadata</li>
<li><a
href="d64e976b4e"><code>d64e976</code></a>
codegen metadata</li>
<li><a
href="9f754653fd"><code>9f75465</code></a>
codegen metadata</li>
<li><a
href="6ec2ea17ac"><code>6ec2ea1</code></a>
chore(internal): remove the next branch rule from CLAUDE.md</li>
<li><a
href="373c33dedf"><code>373c33d</code></a>
codegen metadata</li>
<li>Additional commits viewable in <a
href="https://github.com/anthropics/anthropic-sdk-typescript/compare/sdk-v0.132.1...sdk-v0.133.0">compare
view</a></li>
</ul>
</details>
<br />
Updates `@types/node` from 26.6.4 to 26.6.5
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/DefinitelyTyped/DefinitelyTyped/commits/HEAD/types/node">compare
view</a></li>
</ul>
</details>
<br />
Updates `prettier` from 3.9.9 to 3.9.10
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/prettier/prettier/releases">prettier's
releases</a>.</em></p>
<blockquote>
<h2>3.9.10</h2>
<ul>
<li>Markdown: Update <code>micromark-extension-gfm-table</code> to fix
the table parse issue on performance (<a
href="https://redirect.github.com/prettier/prettier/pull/20266">#20266</a>
by <a href="https://github.com/fisker"><code>@fisker</code></a>)</li>
</ul>
<p>🔗 <a
href="https://github.com/prettier/prettier/blob/3.9.10/CHANGELOG.md#3910">Changelog</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/prettier/prettier/blob/main/CHANGELOG.md">prettier's
changelog</a>.</em></p>
<blockquote>
<h1>3.9.10</h1>
<p><a
href="https://github.com/prettier/prettier/compare/3.9.9...3.9.10">diff</a></p>
<h4>Markdown: Update <code>micromark-extension-gfm-table</code> to fix
the table parse issue on performance (<a
href="https://redirect.github.com/prettier/prettier/pull/20266">#20266</a>
by <a href="https://github.com/fisker"><code>@fisker</code></a>)</h4>
<p>See <a
href="4f43ead37b</a>
for details.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="1172b82c29"><code>1172b82</code></a>
Release 3.9.10</li>
<li><a
href="d0142273af"><code>d014227</code></a>
Update <code>micromark-extension-gfm-table</code> to fix the table parse
issue on perfor...</li>
<li><a
href="953b908432"><code>953b908</code></a>
Bump Prettier dependency to 3.9.9</li>
<li><a
href="ad8a6bf4fa"><code>ad8a6bf</code></a>
Clean changelog_unreleased</li>
<li>See full diff in <a
href="https://github.com/prettier/prettier/compare/3.9.9...3.9.10">compare
view</a></li>
</ul>
</details>
<br />
Updates `@anthropic-ai/claude-agent-sdk-darwin-arm64` from 0.3.293 to
0.3.296
Updates `@anthropic-ai/claude-agent-sdk-darwin-x64` from 0.3.293 to
0.3.296
Updates `@anthropic-ai/claude-agent-sdk-linux-arm64` from 0.3.293 to
0.3.296
Updates `@anthropic-ai/claude-agent-sdk-linux-arm64-musl` from 0.3.293
to 0.3.296
Updates `@anthropic-ai/claude-agent-sdk-linux-x64` from 0.3.293 to
0.3.296
Updates `@anthropic-ai/claude-agent-sdk-linux-x64-musl` from 0.3.293 to
0.3.296
Updates `@anthropic-ai/claude-agent-sdk-win32-arm64` from 0.3.293 to
0.3.296
Updates `@anthropic-ai/claude-agent-sdk-win32-x64` from 0.3.293 to
0.3.296
Updates `express` from 5.2.1 to 5.3.0
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/expressjs/express/releases">express's
releases</a>.</em></p>
<blockquote>
<h2>v5.3.0</h2>
<h2>Highlights</h2>
<h3>🐞 Bug fixes</h3>
<ul>
<li>
<p>Fixed HTTP header conflict between Content-Length and
Transfer-Encoding in res.send - by <a
href="https://github.com/YuryShkoda"><code>@YuryShkoda</code></a> in <a
href="https://redirect.github.com/expressjs/express/pull/4893">#4893</a></p>
<p>Fixed the behavior of <code>res.send()</code> to prevent conflicts
between <code>Content-Length</code> and <code>Transfer-Encoding</code>
HTTP headers in responses. The <code>Content-Length</code> header in
<code>res.send()</code> is now only added when a
<code>Transfer-Encoding</code> header is not present, complying with the
HTTP specification that states both headers should not coexist in the
same response. ETag generation is unaffected by the presence of a
<code>Transfer-Encoding</code> header - by <a
href="https://github.com/cuishuang"><code>@cuishuang</code></a> in <a
href="https://redirect.github.com/expressjs/express/pull/7459">#7459</a></p>
</li>
</ul>
<ul>
<li>
<p>Upgrade <code>qs</code> to <code>^6.16.0</code>, which fixes <a
href="https://www.cve.org/CVERecord?id=CVE-2026-2391">CVE-2026-2391</a>
(<a
href="https://github.com/ljharb/qs/security/advisories/GHSA-w7fw-mjwx-w883">GHSA-w7fw-mjwx-w883</a>),
<a
href="https://www.cve.org/CVERecord?id=CVE-2026-82417">CVE-2026-82417</a>
(<a
href="https://github.com/advisories/GHSA-4mjr-xmp4-gh2g">GHSA-4mjr-xmp4-gh2g</a>)
and <a
href="https://www.cve.org/CVERecord?id=CVE-2026-82562">CVE-2026-82562</a>
(<a
href="https://github.com/advisories/GHSA-x5fp-wj9c-mxmx">GHSA-x5fp-wj9c-mxmx</a>):
<code>arrayLimit</code> bypasses in comma parsing and a denial of
service via an attacker-controlled <code>isBuffer</code> - by <a
href="https://github.com/davetashner"><code>@davetashner</code></a> in
<a
href="https://redirect.github.com/expressjs/express/pull/7057">#7057</a>
and <a
href="https://redirect.github.com/expressjs/express/pull/7478">#7478</a>,
and <a
href="https://github.com/cyphercodes"><code>@cyphercodes</code></a> in
<a
href="https://redirect.github.com/expressjs/express/pull/7305">#7305</a></p>
</li>
<li>
<p>Upgrade <code>proxy-addr</code> to <code>^2.0.8</code>, which fixes
<a
href="https://www.cve.org/CVERecord?id=CVE-2026-90711">CVE-2026-90711</a>
- by <a href="https://github.com/lazerg"><code>@lazerg</code></a> in <a
href="https://redirect.github.com/expressjs/express/pull/7474">#7474</a></p>
</li>
</ul>
<h3>🚀 Improvements</h3>
<ul>
<li>
<p>Allow conditional revalidation for QUERY requests.
<code>req.fresh</code> previously only validated freshness for GET and
HEAD requests, so QUERY responses never returned 304 despite a matching
validator. Since QUERY is a safe, idempotent, and cacheable method that
supports conditional requests, it is now included in the freshness check
- by <a href="https://github.com/Cherry"><code>@Cherry</code></a> in <a
href="https://redirect.github.com/expressjs/express/pull/7366">#7366</a></p>
<pre lang="js"><code>// QUERY /reports with If-None-Match:
"12345"
app.query('/reports', (req, res) => {
res.set('ETag', '"12345"');
res.send(results); // now responds 304 Not Modified
});
</code></pre>
</li>
<li>
<p>Improve HTML structure in <code>res.redirect()</code> responses when
HTML format is accepted by adding <code><!DOCTYPE html></code>,
<code><title></code>, and <code><body></code> tags for
better browser compatibility - by <a
href="https://github.com/Bernice55231"><code>@Bernice55231</code></a>
in <a
href="https://redirect.github.com/expressjs/express/pull/5167">#5167</a></p>
</li>
<li>
<p>When calling <code>app.render</code> with options set to null, the
locals object is handled correctly, preventing unexpected errors and
making the method behave the same as when options is omitted or an empty
object is passed - by <a
href="https://github.com/AkaHarshit">AkaHarshit</a> in <a
href="https://redirect.github.com/expressjs/express/pull/6903">#6903</a></p>
<pre lang="js"><code>app.render('index', null, callback); // now works
as expected
</code></pre>
</li>
<li>
<p>Upgrade <code>content-type</code> to <code>^2.0.0</code>, bringing a
faster parser (~1.5x quicker <code>Content-Type</code>
parsing/formatting in <code>res.send()</code>) along with a behavior
change: <code>res.send()</code> now keeps any existing parameters when
adding the charset and no longer throws on a <code>Content-Type</code>
that fails to parse. <code>type-is</code> is upgraded to
<code>^2.1.0</code> as part of the same change - by <a
href="https://github.com/blakeembrey"><code>@blakeembrey</code></a> in
<a
href="https://redirect.github.com/expressjs/express/pull/7234">#7234</a></p>
<pre lang="js"><code>res.set('Content-Type', 'text/plain;
foo=bar').send('hey');
// -> Content-Type: text/plain; foo=bar; charset=utf-8
</code></pre>
</li>
<li>
<p>The default error handler now logs the full error object instead of
only its stack trace, so nested details such as <code>Error.cause</code>
and library-specific properties (e.g. Sequelize's
<code>parent</code>/<code>original</code>) are no longer swallowed - by
<a
href="https://github.com/Nitin-Mohapatra"><code>@Nitin-Mohapatra</code></a>
in <a
href="https://redirect.github.com/expressjs/express/pull/6464">#6464</a></p>
</li>
<li>
<p>Upgrade <code>content-disposition</code> to <code>^2.0.1</code>,
which changes the <code>Content-Disposition</code> header emitted by
<code>res.download()</code>, <code>res.attachment()</code>, and
<code>res.sendFile()</code>: file names that are valid HTTP tokens are
no longer wrapped in quotes. This is equivalent per RFC 6266, but
applications asserting on the exact header bytes should update their
expectations - by <a
href="https://github.com/blakeembrey"><code>@blakeembrey</code></a> in
<a
href="https://redirect.github.com/expressjs/express/pull/7233">#7233</a></p>
<pre lang="js"><code>res.attachment('user.html');
// before -> Content-Disposition: attachment;
filename="user.html"
// after -> Content-Disposition: attachment; filename=user.html
</code></pre>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/expressjs/express/blob/master/History.md">express's
changelog</a>.</em></p>
<blockquote>
<h1>5.3.0</h1>
<h2>🐞 Bug fixes</h2>
<ul>
<li>
<p>Fixed HTTP header conflict between Content-Length and
Transfer-Encoding in res.send - by <a
href="https://github.com/YuryShkoda"><code>@YuryShkoda</code></a> in <a
href="https://redirect.github.com/expressjs/express/pull/4893">#4893</a></p>
<p>Fixed the behavior of <code>res.send()</code> to prevent conflicts
between <code>Content-Length</code> and <code>Transfer-Encoding</code>
HTTP headers in responses. The <code>Content-Length</code> header in
<code>res.send()</code> is now only added when a
<code>Transfer-Encoding</code> header is not present, complying with the
HTTP specification that states both headers should not coexist in the
same response. ETag generation is unaffected by the presence of a
<code>Transfer-Encoding</code> header - by <a
href="https://github.com/cuishuang"><code>@cuishuang</code></a> in <a
href="https://redirect.github.com/expressjs/express/pull/7459">#7459</a></p>
</li>
</ul>
<ul>
<li>
<p>Upgrade <code>qs</code> to <code>^6.16.0</code>, which fixes <a
href="https://www.cve.org/CVERecord?id=CVE-2026-2391">CVE-2026-2391</a>
(<a
href="https://github.com/ljharb/qs/security/advisories/GHSA-w7fw-mjwx-w883">GHSA-w7fw-mjwx-w883</a>),
<a
href="https://www.cve.org/CVERecord?id=CVE-2026-82417">CVE-2026-82417</a>
(<a
href="https://github.com/advisories/GHSA-4mjr-xmp4-gh2g">GHSA-4mjr-xmp4-gh2g</a>)
and <a
href="https://www.cve.org/CVERecord?id=CVE-2026-82562">CVE-2026-82562</a>
(<a
href="https://github.com/advisories/GHSA-x5fp-wj9c-mxmx">GHSA-x5fp-wj9c-mxmx</a>):
<code>arrayLimit</code> bypasses in comma parsing and a denial of
service via an attacker-controlled <code>isBuffer</code> - by <a
href="https://github.com/davetashner"><code>@davetashner</code></a> in
<a
href="https://redirect.github.com/expressjs/express/pull/7057">#7057</a>
and <a
href="https://redirect.github.com/expressjs/express/pull/7478">#7478</a>,
and <a
href="https://github.com/cyphercodes"><code>@cyphercodes</code></a> in
<a
href="https://redirect.github.com/expressjs/express/pull/7305">#7305</a></p>
</li>
<li>
<p>Upgrade <code>proxy-addr</code> to <code>^2.0.8</code>, which fixes
<a
href="https://www.cve.org/CVERecord?id=CVE-2026-90711">CVE-2026-90711</a>
- by <a href="https://github.com/lazerg"><code>@lazerg</code></a> in <a
href="https://redirect.github.com/expressjs/express/pull/7474">#7474</a></p>
</li>
</ul>
<h2>🚀 Improvements</h2>
<ul>
<li>
<p>Allow conditional revalidation for QUERY requests.
<code>req.fresh</code> previously only validated freshness for GET and
HEAD requests, so QUERY responses never returned 304 despite a matching
validator. Since QUERY is a safe, idempotent, and cacheable method that
supports conditional requests, it is now included in the freshness check
- by <a href="https://github.com/Cherry"><code>@Cherry</code></a> in <a
href="https://redirect.github.com/expressjs/express/pull/7366">#7366</a></p>
<pre lang="js"><code>// QUERY /reports with If-None-Match:
"12345"
app.query('/reports', (req, res) => {
res.set('ETag', '"12345"');
res.send(results); // now responds 304 Not Modified
});
</code></pre>
</li>
<li>
<p>Improve HTML structure in <code>res.redirect()</code> responses when
HTML format is accepted by adding <code><!DOCTYPE html></code>,
<code><title></code>, and <code><body></code> tags for
better browser compatibility - by <a
href="https://github.com/Bernice55231"><code>@Bernice55231</code></a>
in <a
href="https://redirect.github.com/expressjs/express/pull/5167">#5167</a></p>
</li>
<li>
<p>When calling <code>app.render</code> with options set to null, the
locals object is handled correctly, preventing unexpected errors and
making the method behave the same as when options is omitted or an empty
object is passed - by <a
href="https://github.com/AkaHarshit">AkaHarshit</a> in <a
href="https://redirect.github.com/expressjs/express/pull/6903">#6903</a></p>
<pre lang="js"><code>app.render('index', null, callback); // now works
as expected
</code></pre>
</li>
<li>
<p>Upgrade <code>content-type</code> to <code>^2.0.0</code>, bringing a
faster parser (~1.5x quicker <code>Content-Type</code>
parsing/formatting in <code>res.send()</code>) along with a behavior
change: <code>res.send()</code> now keeps any existing parameters when
adding the charset and no longer throws on a <code>Content-Type</code>
that fails to parse. <code>type-is</code> is upgraded to
<code>^2.1.0</code> as part of the same change - by <a
href="https://github.com/blakeembrey"><code>@blakeembrey</code></a> in
<a
href="https://redirect.github.com/expressjs/express/pull/7234">#7234</a></p>
<pre lang="js"><code>res.set('Content-Type', 'text/plain;
foo=bar').send('hey');
// -> Content-Type: text/plain; foo=bar; charset=utf-8
</code></pre>
</li>
<li>
<p>The default error handler now logs the full error object instead of
only its stack trace, so nested details such as <code>Error.cause</code>
and library-specific properties (e.g. Sequelize's
<code>parent</code>/<code>original</code>) are no longer swallowed - by
<a
href="https://github.com/Nitin-Mohapatra"><code>@Nitin-Mohapatra</code></a>
in <a
href="https://redirect.github.com/expressjs/express/pull/6464">#6464</a></p>
</li>
<li>
<p>Upgrade <code>content-disposition</code> to <code>^2.0.1</code>,
which changes the <code>Content-Disposition</code> header emitted by
<code>res.download()</code>, <code>res.attachment()</code>, and
<code>res.sendFile()</code>: file names that are valid HTTP tokens are
no longer wrapped in quotes. This is equivalent per RFC 6266, but
applications asserting on the exact header bytes should update their
expectations - by <a
href="https://github.com/blakeembrey"><code>@blakeembrey</code></a> in
<a
href="https://redirect.github.com/expressjs/express/pull/7233">#7233</a></p>
<pre lang="js"><code>res.attachment('user.html');
// before -> Content-Disposition: attachment;
filename="user.html"
// after -> Content-Disposition: attachment; filename=user.html
</code></pre>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="cf6722bf89"><code>cf6722b</code></a>
5.3.0 (<a
href="https://redirect.github.com/expressjs/express/issues/7468">#7468</a>)</li>
<li><a
href="8c2fcfcb7d"><code>8c2fcfc</code></a>
docs: fix typos and a stale API reference in lib comments (<a
href="https://redirect.github.com/expressjs/express/issues/7512">#7512</a>)</li>
<li><a
href="9efc29e280"><code>9efc29e</code></a>
docs: fix pass-through typos (<a
href="https://redirect.github.com/expressjs/express/issues/7509">#7509</a>)</li>
<li><a
href="2717ae3cbf"><code>2717ae3</code></a>
build(deps): bump the github-actions group with 3 updates (<a
href="https://redirect.github.com/expressjs/express/issues/7499">#7499</a>)</li>
<li><a
href="de777714df"><code>de77771</code></a>
build(deps-dev): bump hbs from 4.3.0 to 4.3.1 (<a
href="https://redirect.github.com/expressjs/express/issues/7500">#7500</a>)</li>
<li><a
href="9169cbe112"><code>9169cbe</code></a>
docs: add missing apostrophe in example (<a
href="https://redirect.github.com/expressjs/express/issues/7483">#7483</a>)</li>
<li><a
href="7ef98448f8"><code>7ef9844</code></a>
build(deps-dev): bump morgan from 1.12.0 to 1.12.1 (<a
href="https://redirect.github.com/expressjs/express/issues/7493">#7493</a>)</li>
<li><a
href="3b7e39fe74"><code>3b7e39f</code></a>
deps: bump qs minimum to 6.16.0 (<a
href="https://redirect.github.com/expressjs/express/issues/7478">#7478</a>)</li>
<li><a
href="98bd4cd96b"><code>98bd4cd</code></a>
deps: proxy-addr@^2.0.8 (<a
href="https://redirect.github.com/expressjs/express/issues/7474">#7474</a>)</li>
<li><a
href="9a34acf03c"><code>9a34acf</code></a>
fix(res.send): preserve ETag generation with Transfer-Encoding (<a
href="https://redirect.github.com/expressjs/express/issues/7459">#7459</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/expressjs/express/compare/v5.2.1...v5.3.0">compare
view</a></li>
</ul>
</details>
<details>
<summary>Maintainer changes</summary>
<p>This version was pushed to npm by <a
href="https://www.npmjs.com/~GitHub%20Actions">GitHub Actions</a>, a new
releaser for express since your current version.</p>
</details>
<br />
Updates `vite` from 8.3.3 to 8.3.4
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/vitejs/vite/releases">vite's
releases</a>.</em></p>
<blockquote>
<h2>v8.3.4</h2>
<h3>Features</h3>
<ul>
<li><strong>bundled-dev:</strong> support
<code>import.meta.hot.acceptExports</code> (<a
href="https://redirect.github.com/vitejs/vite/issues/23463">#23463</a>)
(<a
href="bc0f21c56a">bc0f21c</a>)</li>
</ul>
<h3>Bug Fixes</h3>
<ul>
<li>avoid mutating hmr defaults (fix <a
href="https://redirect.github.com/vitejs/vite/issues/23575">#23575</a>)
(<a
href="https://redirect.github.com/vitejs/vite/issues/23576">#23576</a>)
(<a
href="574d5e3519">574d5e3</a>)</li>
<li><strong>build:</strong> correct preloads when chunkImportMap is
enabled with non-root base (<a
href="https://redirect.github.com/vitejs/vite/issues/23698">#23698</a>)
(<a
href="2a8c0f05c7">2a8c0f0</a>)</li>
<li><strong>build:</strong> wait for in-flight stylesheets in preload
helper (fix <a
href="https://redirect.github.com/vitejs/vite/issues/23652">#23652</a>)
(<a
href="https://redirect.github.com/vitejs/vite/issues/23662">#23662</a>)
(<a
href="036b74599b">036b745</a>)</li>
<li><strong>bundled-dev:</strong> serve <code>/@vite/client</code> and
stub <code>@vite/env</code> (<a
href="https://redirect.github.com/vitejs/vite/issues/23664">#23664</a>)
(<a
href="5afc5a8876">5afc5a8</a>)</li>
<li><strong>client:</strong> skip rewriting unchanged adopted styles (<a
href="https://redirect.github.com/vitejs/vite/issues/23697">#23697</a>)
(<a
href="fa7146938b">fa71469</a>)</li>
<li><strong>css:</strong> resolve imported preprocessors from their file
path with lightningcss (<a
href="https://redirect.github.com/vitejs/vite/issues/23688">#23688</a>)
(<a
href="cf52011c46">cf52011</a>)</li>
<li><strong>deps:</strong> update all non-major dependencies (<a
href="https://redirect.github.com/vitejs/vite/issues/23648">#23648</a>)
(<a
href="8a4c19cfc0">8a4c19c</a>)</li>
<li><strong>deps:</strong> update rolldown-related dependencies (<a
href="https://redirect.github.com/vitejs/vite/issues/23649">#23649</a>)
(<a
href="794516d50c">794516d</a>)</li>
<li><strong>dev:</strong> a restart requested during a restart used to
be dropped (fix <a
href="https://redirect.github.com/vitejs/vite/issues/23392">#23392</a>)
(<a
href="https://redirect.github.com/vitejs/vite/issues/23484">#23484</a>)
(<a
href="70d56ea184">70d56ea</a>)</li>
<li>don't treat modules ending with js-like query as js (<a
href="https://redirect.github.com/vitejs/vite/issues/23687">#23687</a>)
(<a
href="fcb6f1252a">fcb6f12</a>)</li>
<li><strong>html:</strong> avoid adding filesystem root to watcher (<a
href="https://redirect.github.com/vitejs/vite/issues/23689">#23689</a>)
(<a
href="3a7f2aea75">3a7f2ae</a>)</li>
<li><strong>html:</strong> skip caching CSS of chunks in a cycle (fix <a
href="https://redirect.github.com/vitejs/vite/issues/23628">#23628</a>)
(<a
href="https://redirect.github.com/vitejs/vite/issues/23636">#23636</a>)
(<a
href="15d82f7dc6">15d82f7</a>)</li>
<li><strong>optimizer:</strong> scan deep imports with custom extensions
(<a
href="https://redirect.github.com/vitejs/vite/issues/23678">#23678</a>)
(<a
href="8579189bae">8579189</a>)</li>
<li>remove input option unescaping for now (<a
href="https://redirect.github.com/vitejs/vite/issues/23694">#23694</a>)
(<a
href="facc2fb1ff">facc2fb</a>)</li>
<li><strong>server:</strong> match static aliases on path boundaries (<a
href="https://redirect.github.com/vitejs/vite/issues/23643">#23643</a>)
(<a
href="b28db28e9e">b28db28</a>)</li>
<li><strong>watcher:</strong> normalize file before root check in
<code>ensureWatchedFile</code> (<a
href="https://redirect.github.com/vitejs/vite/issues/23673">#23673</a>)
(<a
href="12bb28c223">12bb28c</a>)</li>
</ul>
<h3>Performance Improvements</h3>
<ul>
<li><strong>module-runner:</strong> skip cloning call sites that have no
source map (<a
href="https://redirect.github.com/vitejs/vite/issues/23646">#23646</a>)
(<a
href="3d674869a5">3d67486</a>)</li>
</ul>
<h3>Code Refactoring</h3>
<ul>
<li><strong>bundled-dev:</strong> import CSS HMR helpers from
<code>/@vite/client</code> (<a
href="https://redirect.github.com/vitejs/vite/issues/23674">#23674</a>)
(<a
href="182f5b2a65">182f5b2</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/vitejs/vite/blob/main/packages/vite/CHANGELOG.md">vite's
changelog</a>.</em></p>
<blockquote>
<h2><!-- raw HTML omitted --><a
href="https://github.com/vitejs/vite/compare/v8.3.3...v8.3.4">8.3.4</a>
(2026-10-08)<!-- raw HTML omitted --></h2>
<h3>Features</h3>
<ul>
<li><strong>bundled-dev:</strong> support
<code>import.meta.hot.acceptExports</code> (<a
href="https://redirect.github.com/vitejs/vite/issues/23463">#23463</a>)
(<a
href="bc0f21c56a">bc0f21c</a>)</li>
</ul>
<h3>Bug Fixes</h3>
<ul>
<li>avoid mutating hmr defaults (fix <a
href="https://redirect.github.com/vitejs/vite/issues/23575">#23575</a>)
(<a
href="https://redirect.github.com/vitejs/vite/issues/23576">#23576</a>)
(<a
href="574d5e3519">574d5e3</a>)</li>
<li><strong>build:</strong> correct preloads when chunkImportMap is
enabled with non-root base (<a
href="https://redirect.github.com/vitejs/vite/issues/23698">#23698</a>)
(<a
href="2a8c0f05c7">2a8c0f0</a>)</li>
<li><strong>build:</strong> wait for in-flight stylesheets in preload
helper (fix <a
href="https://redirect.github.com/vitejs/vite/issues/23652">#23652</a>)
(<a
href="https://redirect.github.com/vitejs/vite/issues/23662">#23662</a>)
(<a
href="036b74599b">036b745</a>)</li>
<li><strong>bundled-dev:</strong> serve <code>/@vite/client</code> and
stub <code>@vite/env</code> (<a
href="https://redirect.github.com/vitejs/vite/issues/23664">#23664</a>)
(<a
href="5afc5a8876">5afc5a8</a>)</li>
<li><strong>client:</strong> skip rewriting unchanged adopted styles (<a
href="https://redirect.github.com/vitejs/vite/issues/23697">#23697</a>)
(<a
href="fa7146938b">fa71469</a>)</li>
<li><strong>css:</strong> resolve imported preprocessors from their file
path with lightningcss (<a
href="https://redirect.github.com/vitejs/vite/issues/23688">#23688</a>)
(<a
href="cf52011c46">cf52011</a>)</li>
<li><strong>deps:</strong> update all non-major dependencies (<a
href="https://redirect.github.com/vitejs/vite/issues/23648">#23648</a>)
(<a
href="8a4c19cfc0">8a4c19c</a>)</li>
<li><strong>deps:</strong> update rolldown-related dependencies (<a
href="https://redirect.github.com/vitejs/vite/issues/23649">#23649</a>)
(<a
href="794516d50c">794516d</a>)</li>
<li><strong>dev:</strong> a restart requested during a restart used to
be dropped (fix <a
href="https://redirect.github.com/vitejs/vite/issues/23392">#23392</a>)
(<a
href="https://redirect.github.com/vitejs/vite/issues/23484">#23484</a>)
(<a
href="70d56ea184">70d56ea</a>)</li>
<li>don't treat modules ending with js-like query as js (<a
href="https://redirect.github.com/vitejs/vite/issues/23687">#23687</a>)
(<a
href="fcb6f1252a">fcb6f12</a>)</li>
<li><strong>html:</strong> avoid adding filesystem root to watcher (<a
href="https://redirect.github.com/vitejs/vite/issues/23689">#23689</a>)
(<a
href="3a7f2aea75">3a7f2ae</a>)</li>
<li><strong>html:</strong> skip caching CSS of chunks in a cycle (fix <a
href="https://redirect.github.com/vitejs/vite/issues/23628">#23628</a>)
(<a
href="https://redirect.github.com/vitejs/vite/issues/23636">#23636</a>)
(<a
href="15d82f7dc6">15d82f7</a>)</li>
<li><strong>optimizer:</strong> scan deep imports with custom extensions
(<a
href="https://redirect.github.com/vitejs/vite/issues/23678">#23678</a>)
(<a
href="8579189bae">8579189</a>)</li>
<li>remove input option unescaping for now (<a
href="https://redirect.github.com/vitejs/vite/issues/23694">#23694</a>)
(<a
href="facc2fb1ff">facc2fb</a>)</li>
<li><strong>server:</strong> match static aliases on path boundaries (<a
href="https://redirect.github.com/vitejs/vite/issues/23643">#23643</a>)
(<a
href="b28db28e9e">b28db28</a>)</li>
<li><strong>watcher:</strong> normalize file before root check in
<code>ensureWatchedFile</code> (<a
href="https://redirect.github.com/vitejs/vite/issues/23673">#23673</a>)
(<a
href="12bb28c223">12bb28c</a>)</li>
</ul>
<h3>Performance Improvements</h3>
<ul>
<li><strong>module-runner:</strong> skip cloning call sites that have no
source map (<a
href="https://redirect.github.com/vitejs/vite/issues/23646">#23646</a>)
(<a
href="3d674869a5">3d67486</a>)</li>
</ul>
<h3>Code Refactoring</h3>
<ul>
<li><strong>bundled-dev:</strong> import CSS HMR helpers from
<code>/@vite/client</code> (<a
href="https://redirect.github.com/vitejs/vite/issues/23674">#23674</a>)
(<a
href="182f5b2a65">182f5b2</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="b6c20f6a81"><code>b6c20f6</code></a>
release: v8.3.4 (<a
href="https://github.com/vitejs/vite/tree/HEAD/packages/vite/issues/23702">#23702</a>)</li>
<li><a
href="b28db28e9e"><code>b28db28</code></a>
fix(server): match static aliases on path boundaries (<a
href="https://github.com/vitejs/vite/tree/HEAD/packages/vite/issues/23643">#23643</a>)</li>
<li><a
href="bc0f21c56a"><code>bc0f21c</code></a>
feat(bundled-dev): support <code>import.meta.hot.acceptExports</code>
(<a
href="https://github.com/vitejs/vite/tree/HEAD/packages/vite/issues/23463">#23463</a>)</li>
<li><a
href="fa7146938b"><code>fa71469</code></a>
fix(client): skip rewriting unchanged adopted styles (<a
href="https://github.com/vitejs/vite/tree/HEAD/packages/vite/issues/23697">#23697</a>)</li>
<li><a
href="2a8c0f05c7"><code>2a8c0f0</code></a>
fix(build): correct preloads when chunkImportMap is enabled with
non-root bas...</li>
<li><a
href="3a7f2aea75"><code>3a7f2ae</code></a>
fix(html): avoid adding filesystem root to watcher (<a
href="https://github.com/vitejs/vite/tree/HEAD/packages/vite/issues/23689">#23689</a>)</li>
<li><a
href="facc2fb1ff"><code>facc2fb</code></a>
fix: remove input option unescaping for now (<a
href="https://github.com/vitejs/vite/tree/HEAD/packages/vite/issues/23694">#23694</a>)</li>
<li><a
href="70d56ea184"><code>70d56ea</code></a>
fix(dev): a restart requested during a restart used to be dropped (fix
<a
href="https://github.com/vitejs/vite/tree/HEAD/packages/vite/issues/23392">#23392</a>...</li>
<li><a
href="cf52011c46"><code>cf52011</code></a>
fix(css): resolve imported preprocessors from their file path with
lightningc...</li>
<li><a
href="fcb6f1252a"><code>fcb6f12</code></a>
fix: don't treat modules ending with js-like query as js (<a
href="https://github.com/vitejs/vite/tree/HEAD/packages/vite/issues/23687">#23687</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/vitejs/vite/commits/v8.3.4/packages/vite">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Refs #1061.
> Reworked on top of #1327, which merged in the meantime and already
closes a cancelled turn's open tool calls in the consumer. This PR now
covers the one path #1327 does not reach. The original description is
kept at the end.
## What it fixes
When a cancel lands on a turn that already has its result, `cancelTurns`
settles the turn itself instead of leaving it to the consumer:
- a turn held open for its background subagents, while the session is
idle;
- a turn waiting on its checkpoint preview.
That path skipped #1327's `closeCancelledToolCalls`, so a tool call
still open there stayed `pending` after the cancelled response.
`cancelTurns` now runs the same closing before it responds.
## Changes
- **One rule for both paths.** The consumer exposes its closing as
`Session.closeCancelledToolCalls`, the way it already exposes
`nativeSubagentDeliver`. Every open call ends with
`AcpToolCallRenderer.unfinished`, except a background subagent's calls,
which the cancel did not stop.
- **The closing runs once per turn** (`Turn.closingCancelledToolCalls`).
Example: a first cancel lands during a held turn's follow-up cycle, so
the consumer settles the turn at the idle and starts closing its calls.
A second cancel then settles the turn inline. It waits for the
consumer's closing instead of starting its own, so each call gets one
report and the response comes after all of them.
- **`cancelTurns`** marks the turn settled before it waits for the
reports, so the consumer cannot settle it again. If a report fails, it
logs the error and still responds and interrupts.
- **Removed:** this PR's original consumer-side branch and its `failed`
report, which #1327's closing replaces.
## Tests
- **Kept from this PR:** inline settles of a deferred turn and of a
checkpoint turn, overlapping and simultaneous cancels, a failed report,
a checkpoint that finishes during the closing.
- **Changed:** the deferred fixture's background shell had no tool
result, though Claude Code answers a `run_in_background` call when it
starts. It is now a background subagent whose own command stays open.
- **Removed:** `terminates a tool whose start streams in after the
cancel`, which #1327 covers.
- **New:** a second cancel that settles a held turn while the consumer
is closing its calls.
- **Removal checks:** removing the inline closing fails 6 tests, the
once-per-turn closing 1, settling before the wait 2, and the error
handling 1.
`npm run check`, build and the full suite (2909 tests) pass, with no
golden changes.
## Not covered
A tool start that streams in after the turn has settled (the incident in
#1061) still opens a tool call that nothing closes. Neither this PR nor
#1327 changes that.
<details>
<summary>Original description</summary>
Refs #1061. This closes part of the issue, not all of it; the part it
leaves open is described below.
## What it fixes
`settleActive` already fails every unfinished foreground tool when a
turn ends as `end_turn` ("Claude ended the turn without returning a
result for this tool"). It did nothing when the turn settled as
`cancelled`, so a tool start that never got a `tool_result` stayed in
`emittedToolCalls` and the client was left with an open `tool_call`
forever.
How a start can end up with no terminal: the `stream_event` case has no
`session.cancelled` gate, so `content_block_start` for a `tool_use`
keeps becoming a `tool_call` after `cancel()`. The consolidated
`user`/`assistant` path, which is where `tool_result`-derived terminals
come from, drops everything at its `session.cancelled` guard.
This adds a `cancelled` branch next to the `end_turn` one. It reuses the
same selection (this turn's `foregroundToolCallIds` still in
`emittedToolCalls`, minus confirmed background tasks) and sends one
`tool_call_update` with `status: "failed"` per tool ("The turn was
cancelled before this tool call finished."). ACP's `ToolCallStatus` has
no cancelled value, so `failed` is the available terminal. Unlike
`end_turn`, cancellation is expected, so there is no session failure and
no early return.
## What it does not fix
A tool start that arrives **after** the turn has already settled (the
reporter's incident: starts streaming in minutes after the cancel).
There is no unsettled turn to attach it to, and I could not find an
exact gate: stream events carry no `origin` or turn attribution (the
existing comment on `emittedAssistantText` says as much), so such a
start cannot be told apart from an autonomous cycle or from the next
turn's pre-echo events. Gating on `session.cancelled` has the inverse
problem the reporter described. If maintainers see an attribution signal
I missed, a lifecycle-scoped gate would be the complement to this
change.
## Test changes
- `preserves cancellation and does not attribute its unfinished tool to
the next turn` asserted that the cancelled turn's tool gets **no**
`failed` update. That encoded the old behaviour, so it now asserts
exactly one cancellation terminal that the next turn neither repeats nor
reports as `incomplete_tool_call`. The cancel-then-next-prompt
assertions are unchanged.
- New: `terminates a tool whose start streams in after the cancel`
(start arrives between `cancel()` and the trailing idle).
Both fail without the change and pass with it. Full suite (2127 tests),
`npm run check` and `build` pass. One unrelated timeout in
`acp-scenarios` (`schema check`) showed up under load in one full run
and passes when run on its own.
## Live check
Against the built adapter (real credentials), I asked for `sleep 45`,
cancelled once the `tool_call` appeared, and listed every tool call and
its statuses at the end. Before and after the change the result is the
same: one tool call, `pending > ... > failed`, nothing open. So in the
plain cancel-mid-tool case the SDK already delivers an interrupted
result and there is no ghost to remove; I could not reproduce the
reporter's leak live, only in the unit fixture above. What the live run
does show is that the new branch does not send a duplicate terminal for
a tool that was already terminated.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
https://claude.ai/code/session_019vH6BXrsYQN3MqQ93JgStf
</details>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
A replay now restores subagents for a client on the [subagents
RFD](https://github.com/agentclientprotocol/agent-client-protocol/blob/main/docs/rfds/subagents.mdx)
form: a v1 client that declares `subagents` and isn't AIR, and every v2
client. Until now, its replay left children out. **AIR's replay is
unchanged.**
## The rules
The RFD asks that replayed children keep their original session ids and
known parentage, and that announcements come before child traffic. It
forbids guessing a parent or inventing an id, and asks that known gaps
be made apparent. It also requires all selected history before the
response.
- **Ids:** each child replays under the session id it had live, the SDK
agent id. Claude Code's `subagents/agent-<id>.meta.json` names the Agent
or Task call that launched agent `<id>`.
- **Order:**
- The child is announced on the session that made the launch, right
after the launch, with the same labels as live: the `name` and the role
as `title`, and the short `description`.
- Its own transcript then goes to the child session.
- A nested child is announced on the child that launched it.
- **Incoming messages:** the child's prompt is a `session_message` with
the launch's id and the parent as sender, as live. A message that a
SendMessage call delivered (`origin.kind: "coordinator"`) is matched to
its call by the call's text. Claude Code frames it with a preface and an
instruction, so the match checks that the delivered text contains the
call's message. It then has the SendMessage's id, text, and sender, as
live; without a match, its transcript id and the delivered text.
- **Harness text:** other user text in a child's transcript, such as
"[Request interrupted by user for tool use]", isn't shown, as the live
child session doesn't show it. Tool results stay.
- **Ends:** every child's end is an `idle` before the response. The end
comes from the first of these that applies:
1. its last persisted task notification (its task id is the agent id)
2. `cancelled`, if `meta.json` says the user stopped it
3. its foreground launch's result (a background launch's result is only
its launch)
4. otherwise, `idle` with no stop reason
- **Gaps:**
- A launch without metadata has no known id, so it isn't announced; its
Agent call stays an ordinary tool call of the parent. A child whose
transcript can't be read replays only its association, as the RFD
allows.
- Either case adds one notice for a client that takes notices: "Some
subagent history is not available".
- A subagent message that the session transcript stores inline is left
out, since the child's history comes from its own transcript. Current
Claude Code doesn't store such messages.
- **v2:** a replayed child's messages are cleared before their first
replayed chunk, as the parent's already are. A v2 client may still hold
them.
## Changes in the code
- **`src/subagent-replay.ts` (new):** `RfdSubagentReplay` holds the
replay's children, deliveries, and ends. The replay loop in
`acp-agent.ts` calls it at the launch, for each child message, and at
the end.
- **`subagentHistory`:** returns each launch's whole metadata record
(name, role, description, background, stopped by the user). AIR and the
RFD form share `readSubagentMessages`.
- **The v2 bridge:** registers a child that a replay announces as
replaying too.
## Evidence
- **Live, v1:** I loaded a real Claude Code session from a live run: a
foreground `scout` resumed once by SendMessage, and a background
`sleeper` that a cancel stopped.
- Both children replay under their live agent ids, with their labels.
- `scout`'s prompt and its SendMessage delivery have exactly the ids and
senders the live run used (`toolu_…HvPNZm` and `toolu_…cB3K9t`, from the
root).
- `scout` ends `end_turn`, and `sleeper` ends `cancelled`, from
`stoppedByUser`.
- **Live, v2:** the same session over v2 with replay. There were no v2
schema violations, each child's state is mirrored on its own stream, and
all of it comes before the resume response.
- **Tests:**
- v1: a full replay order with a nested child, a matched delivery,
dropped harness text, the ends, and the notice for a launch without
metadata; ends for a stopped child and for one with no known end; inline
subagent messages left out.
- v2: a child's replayed message is cleared on the child session.
- **Mutation checks:** removing any of the rules fails a test:
- the v2 child registration
- the RFD replay
- the delivery match
- the inline skip
- `stoppedByUser`
- ignoring a background launch's result
- dropping harness text
- the notice
- **Golden files:** only the v2 `session-load-replay` changes. It gains
the notice, because its Task launch has no metadata. The AIR golden
files are unchanged.
- **Checks:** `npm run check`, build and all 2886 tests pass.
## Not in this PR
- **A SendMessage after a reload:** a SendMessage to an agent from
before a reload still finds no known child in the live runtime, so the
agent stays unexposed. A follow-up registers the replayed children, and
the children of a resume without replay, in the runtime.
## Release
Titled `feat:`, since a v1 client on the RFD form gets new replay
output. Retitle it if you'd rather not release it.
## Problem
After `session/cancel`, a tool call that was still running never gets a
final status. On `main` (Claude Code 2.1.293, a v1 client that declares
no capabilities) all three of these stay `pending` for good:
- the root's own Bash call, cancelled while its command runs;
- a foreground Agent call;
- the Bash call of that Agent's subagent, which this client sees as a
root tool call with `_meta.claudeCode.parentToolUseId`.
v2 has the same problem, and so does the subagents RFD form: the
subagent's call stays pending in the child's session after the child
reports `idle cancelled`. Found in the live run of #1257.
## Cause
I recorded the raw SDK stream (`emitRawSDKMessages`) and the session
transcripts of a live run on `main`. There are two gaps.
1. **The window drops Claude Code's interrupted result.** For the root
Bash and the Agent call, Claude Code does send a result, inside the
post-cancel window of #1309 and #1313, before the turn's `result`: a
`tool_result` with `is_error: true`, stamped `non_execution_kind:
"user-rejected"`, then `[Request interrupted by user for tool use]`,
then the aborted result. The `if (session.cancelled) break;` in the
`user`/`assistant` case drops it.
2. **The subagent's call gets no result at all.** Claude Code writes its
interrupted result only to the subagent's own transcript
(`<session>/subagents/agent-*.jsonl`). The stream never carries it,
before or after the response, so no change to what the window delivers
can reach it.
Nothing else closes these calls. `closeUnfinished` runs only at
`end_turn`, over the turn's `foregroundToolCallIds`, and that set holds
none of the three: `task_started` removes a Bash or Agent call from it
(`registerLiveTask`), and a subagent's call is never in it.
## Change
Two rules, in the stream consumer:
- **Deliver the real result.** Until the client is told that the stopped
work ended (the prompt response on v1, `idle` on v2), the window
delivers the `tool_result` of a tool call that the client holds open,
with Claude Code's own text and `nonExecutionKind`. Only the tool call
is updated. The other effects of a tool result (async tasks, plan state,
the ExitPlanMode flow) stay dropped, and so does everything after that
report, which is what #1313 closed.
- **Close what has no result.** When a turn settles `cancelled` because
of `session/cancel`, the adapter closes every tool call still open with
`AcpToolCallRenderer.unfinished`, before it resolves the turn. That
covers the subagent's call, a `tool_use` that Claude abandoned before it
ran, and every call when the stream gives no results (the force-cancel
backstop). Both protocols end the work at `turn.resolve`, so one rule
serves v1 and v2.
Supporting pieces:
- The closing report names the subagent that made the call
(`Session.toolCallParents`, bounded like `dispatchedToolCalls`), so the
subagent runtime routes it with the call's other updates: to the child
session in the RFD form (an idle child still takes updates), to no child
that AIR ended, to the root for a client without subagents.
- A **background** subagent that the SDK has not reported ended keeps
its calls open. The RFD form lets a child run on through a cancel
(`NativeSubagentRuntime.parentCancelled`). Two tests merged with #1320
failed against my first version, which closed those calls, and that is
why the registry exists. A foreground subagent ends with the work that
waits on it.
- For a v2 client, an error result in the window is `cancelled`,
whichever kind Claude Code stamps. CLI 2.1.293 stamps a command that the
interrupt killed `user-rejected`, which `isAbortedToolResult` reads as a
refusal (`failed`). A tool that finished as the cancel landed stays
`completed`. A v1 client gets `failed`, as before, since v1 has no
`cancelled`.
- `unfinished` gets a `cancelled` variant: "The turn was cancelled
before this tool call returned a result."
- The rule applies to `session/cancel` only (`session.cancelled`), not
to the ExitPlanMode "keep planning" outcome, which also ends a turn
`cancelled`.
- README: one sentence on what an RFD client gets at a cancel.
## Why both rules
| | root Bash | Agent call | subagent's Bash |
| --- | --- | --- | --- |
| Deliver the real result only | fixed | fixed | **still pending** (no
result in the stream) |
| Close every open call only | fixed, made up | fixed, made up | fixed,
made up |
| Both (this PR) | Claude Code's result | Claude Code's result | made up
|
Closing alone would fix all three, but it throws away a result that
Claude Code already sent: its text, and the `nonExecutionKind` that lets
a client tell a rejection from an interruption. So the real result goes
out where one exists, and the adapter makes up a status only for what
Claude Code never reports. The Agent call ends first, then its
subagent's call, in the same turn and before the response.
## What does not change
- Output after the report stays dropped. A test pins that the tool of a
prompt the cancel abandoned, which a permission request announces after
the response, gets no result (it fails with the `workEndReported` check
removed).
- A result for a call the client does not hold open sends nothing and
logs nothing.
- AIR ends every child at the cancel, and the runtime drops every later
update to an ended child. The closing reports go through the same
routing and are dropped there, so nothing reaches an ended child (the
live AIR run logs one `ignoring late update for terminal subagent`).
- No golden file changes. None has a cancel, and the diff touches none.
## Evidence
**Live** (Claude Code 2.1.293, Sonnet, each tool call's statuses before
and after the prompt response; the probe allows each permission request
after 1.5 s and cancels 4 s later, with `python3 -c "import time;
time.sleep(30)"` so the command runs; every update is checked against
the SDK's v1 schema):
| | root Bash | Agent call | subagent's Bash | after the response |
| --- | --- | --- | --- | --- |
| `main`, plain v1 | `pending` | `pending` | `pending` | 0 updates |
| this PR, plain v1 | `failed`, Claude Code's text | `failed`, Claude
Code's text | `failed`, closed here | 0 updates, 0 schema violations |
| this PR, RFD client | `failed` | `failed` | `failed`, in the child's
session after its `idle cancelled` | 0 updates, 0 violations |
| this PR, AIR | `failed` | hidden, as before | none: the child ended,
and the runtime dropped the closing update | 0 updates |
| this PR, v2 | `cancelled` | `cancelled` | `cancelled`, in the child's
session, before the root's `idle cancelled` | 0 updates |
The plain and v2 runs are on this commit. The RFD and AIR runs were on
this change before it was rebased onto #1324 and #1325, which change the
v2 subagent surface and the routing of a subagent's hook update, and not
the cancel path. In the raw stream, the subagent's Bash has
`task_notification stopped` and no result. Its transcript has the
`is_error` result.
**Tests** (16 new, one rewritten, one extended), scripted in the order
recorded live:
- `incomplete-tools.test.ts`, plain client: the real result of a running
tool; an Agent call and its subagent's call; the force-cancel backstop;
a start that streams in after the cancel; a result after the response; a
stray result; an abandoned prompt's tool; a background subagent's call
left open; a call that a permission request announced and a later update
attributed; the registry's cleanup.
- `acp-agent.test.ts`: the RFD form (the stopped child's call closed in
its session, the running child's left open, the Agent call's result) and
AIR (nothing to an ended child, including a permission-announced call).
- `acp-v2.test.ts`: `cancelled` for the Agent call and its subagent's
call before `idle cancelled`, `completed` for a tool that finished, and
a cycle that Claude Code started.
- `preserves cancellation and does not attribute its unfinished tool to
the next turn` asserted that the cancelled turn's tool gets no `failed`
update, which is the behavior this PR changes. It now asserts one
report, before the cancelled response and not attributed to the next
turn.
**Mutation checks.** Each of these fails at least one test: no delivery
of the real result (8), no closing at the settle (10), delivery after
the report (1), delivery for calls the client does not hold open (1),
closing a running background subagent's calls (3), no parent on the
report (3), v2 real result not `cancelled` (2), `unfinished` not
`cancelled` on v2 (1), the closing text (4), `ran` ignored (2), the
registry kept after a call ends (1, added after the first run showed
that nothing caught it), the parent recorded only from a `tool_call`
(1), the v1 end-of-work signal on v2 (3), AIR's drop of updates to an
ended child removed (5).
`npm run check`, `npm run build` and `npm run test:run` (2898 tests)
pass.
## Related, and not covered
- #1221 closes the turn's `foregroundToolCallIds` at a cancelled settle
with a made-up `failed`. It overlaps with this change in `settleActive`
and in the test above, so the two will conflict. As far as I can tell
from `registerLiveTask`, it would not have closed the three calls here.
Its scenario, a start that streams in after the cancel, is covered by a
test here. #1221 also hooks the inline settle of a held turn in
`cancelTurns`, which this PR does not touch.
- Not covered: a background subagent's calls when a cancel stops it
while no turn settles (a cancel while idle, or of a held turn that
`cancelTurns` settles inline); the calls of a v2 cycle that Claude Code
started get Claude Code's results, but nothing closes the ones it sends
none for.
- The closing report carries no terminal exit, so a client that shows
command output sees the command's call end without one.
`closeUnfinished` does the same at `end_turn`.
- A background subagent whose end the SDK reports only after the turn's
result keeps its calls open. Claude Code 2.1.293 reports it before.
Adds subagents to the experimental [ACP
v2](https://agentclientprotocol.com/protocol/v2/overview) surface. With
them, it covers v2's baseline session model, so this is the `feat:` that
announces v2 support. The README gains a section on how to enable it and
what it serves.
Based on #1324, a v1 fix that this PR's golden scenarios exposed. Merge
#1324 first; this PR then retargets to `main`.
## Experimental ACP v2
Started with `CLAUDE_AGENT_ACP_EXPERIMENTAL_V2=1`, the adapter serves
the draft ACP v2 to a client that asks for protocol version 2 or later
in `initialize`, and v1 to every other client, as before.
- **Served on v2:**
- the session baseline (`session/new`, `list`, `resume` with replay,
`close`, `prompt`, `cancel`)
- `session/delete`, `session/fork`, and additional directories
- config options (the mode is one), plans, notices, compaction
- display terminals for commands
- permission requests, elicitation, providers, auth
- and now subagents
- **v1 only for now:** steering and the AIR extensions.
The draft can still change, and the surface changes with it.
## What changes
The [subagents
RFD](https://github.com/agentclientprotocol/agent-client-protocol/blob/main/docs/rfds/subagents.mdx)
makes subagent updates part of v2's baseline: "support is assumed rather
than negotiated".
- **Every v2 client gets subagents.** The v2 bridge declares `subagents`
in the v1 request it makes for a v2 client (`v1InitializeRequest`), so
the agent reports each Agent or Task subagent in the RFD form from
#1320–#1322.
- **The updates pass through:** `subagent_update`, `session_message` and
`session_message_chunk` have the same shape in v1 and v2.
- **The child's state goes to its own stream too.** v2 reports a child's
work state on the child's own stream, mirrored on the parent. So a
`subagent_update` with a `state` also becomes the child's
`state_update`, sent right after the parent's copy
(`v2ChildStateUpdate`). The announcement thus comes first, and both
copies of a state come before any later one, as the RFD requires. This
covers `requires_action`, and a failed child's `idle`/`error` with its
JSON-RPC `error`.
- **A state the RFD doesn't define throws,** as an update kind the
surface doesn't translate already does. The SDK types the open members
of v1's and v2's `StateUpdate` apart, so the bridge checks each state
against the RFD's before passing it on.
- **Replay doesn't flatten a child's inline text onto the root.** On
replay, a subagent's text goes to the root only for a client that gets
it there live: one without native subagent sessions that asked for the
flattened transcript. Before, an RFD client (v1, and now v2) got the
inline subagent text of a transcript replayed on the root, though the
RFD form doesn't replay children yet. Current Claude Code keeps subagent
messages in `subagents/`, not inline, so only the `session-load-replay`
scenario's inline message showed it. AIR's replay is unchanged.
## Live run
Against real Claude Code (Sonnet), with a v2 client that checks every
`session/update` and permission request against the SDK's v2 schema,
there were no schema violations:
- **Launch:**
- the child is announced on the root, then reports its own `running`,
then gets its prompt as a `session_message` from the root
- its tool calls arrive on its session, each with a title on its first
report
- the Agent call's 35-second heartbeat stays on the root
- **Permission:**
- `requires_action` appears on the child's stream and on the parent's
copy, and on the root, whose turn waits on the child
- the request goes to the child's session
- then the child is back to `running`
- **SendMessage resume:**
- the same child session runs again, with the root as sender
- the root turn goes idle while the resumed child keeps running, and the
child reports `idle`/`end_turn` later, which v2 allows for background
work
- **Cancel:** the child is `idle`/`cancelled` on both streams, then the
root is `idle`/`cancelled`.
- A tool call still running at the cancel never gets a final status.
That's a known bug on `main` for every client, fixed in a separate PR.
## Tests
- **End to end on v2:** an Agent call whose child fails with an SDK
error. Traffic arrives in order on both streams, and the child's `idle`
carries `error: { code: -32603, message }`.
- **Unit:**
- the pass-through of the three updates
- the child's `state_update`, and no copy for an association update
without a state
- the throw for a state and a stop reason the RFD doesn't define
- **v2 golden files:**
- the six subagent scenarios now show the RFD form: announcements,
prompts, child sessions, both copies of each state, and permission
requests on the child session
- `session-load-replay` is unchanged from `main`
- the scenarios also check every message against the v2 schema, and that
each tool call's first report has a title (that check found #1324)
- **Mutation checks:** each of these fails tests:
- not declaring `subagents`
- dropping the child's copy
- sending it before the parent's
- dropping the state check
- dropping the replay rule
- **v1 golden files:** unchanged.
- **Checks:** `npm run check`, build and all 2882 tests pass. CI runs
only on PRs to `main`, so I ran `ci.yml` on this branch by hand.
## Release
Titled `feat:`, so its title becomes the release note that announces v2.
## Problem
A PostToolUse hook update skipped the subagent router, for every client
with native subagent sessions (AIR's draft and the subagents RFD form):
- **A child's Edit or Write:** its final diff went to the **root**
session, with `parentToolUseId` set. All its other reports go to the
child session, so the client got an update for a tool call it doesn't
have on the root, and the child's tool call never got its final diff.
The RFD forbids moving a tool call between sessions.
- **AIR's hidden Agent/Task call:** AIR's draft hides the Agent/Task
tool call, but its hook update reached AIR anyway, for a tool call AIR
never received.
AIR's golden files had recorded both.
## Cause
`toAcpNotifications` registers a tool's PostToolUse hook the first time
it sees the `tool_use`, with the client passed to it. Claude Code
streams, so that first time is a stream event, and the stream path
passed `this.client` instead of the routed client that every other path
uses. The hook's update then went straight to the client.
## Change
The stream path passes the routed client, so a hook update goes through
`sendUpdate` and the subagent router like every other update. That
client is the only one the stream path uses.
Clients without native subagent sessions are unchanged: the router
passes their updates through as they are.
## Evidence
- **New test:** a child's Edit that is streamed, completed, and then
gets its PostToolUse hook. All the Edit's reports, including the hook's
diff, go to the child session. Without the fix, the hook's report goes
to the root (`Set{ 'agent-42', 'test-session' }`).
- **AIR golden files**, both intended:
- `subagent-task-legacy`: the child Edit's hook update (`locations`)
moves from `<session>` to `agent_1`, and the hidden Task call's hook
update is gone.
- `subagent-agent-async`: the hidden Agent call's hook update is gone.
In both cases it was the only report AIR got for that tool call.
- **How it was found:** declaring subagents for ACP v2 clients (the next
PR) runs the RFD form through the v2 golden scenarios, whose check that
a tool call's first report has a title caught the root-session diff.
- **Checks:** `npm run check`, build and all 2878 tests pass.
The third of three stacked PRs that replace #1257. It's based on #1321,
so its diff shows only the `requires_action` part. Merge #1320 and #1321
first; this PR then retargets to `main`.
1. #1320: the RFD form for a v1 client that declares `subagents` and
isn't AIR.
2. #1321: a child keeps its session across SendMessage resumes.
3. **This PR:** `requires_action` while a child's request is open.
**AIR is unchanged.**
## What changes
The [subagents
RFD](https://github.com/agentclientprotocol/agent-client-protocol/blob/main/docs/rfds/subagents.mdx)
reports a child that waits for the user as `requires_action`.
- **While a request is open:** a child whose permission or question
request is open reports `requires_action` on its parent, then `running`
again when its last open request ends
(`NativeSubagentRuntime.awaitingUser`). The agent wraps the permission
and elicitation requests of a child session in it
(`withChildAwaitingUser`).
- **Overlapping requests** keep `requires_action` until the last one
ends. A child that ended while it waited doesn't report `running` again.
- **A resume while a request is open** reports `requires_action`, not
`running`.
## Live run
Against real Claude Code (Sonnet), a child's Bash permission request
showed `running` → `requires_action` while the request was open →
`running` once it was answered. No schema violations.
## Follow-ups (low severity, not in this PR)
- **Brief `running` after a withdrawal:** after a cancel withdraws a
child's request, the child briefly reports `running` before the SDK's
stop event. The same happens at a stream end, whose cleanup aborts every
pending request.
- **Ignored cancel requests:** AskUserQuestion's `createElicitation` is
not raced against the abort. If a client ignores `$/cancel_request`, the
child's open-request count stays up, and a later resume reports
`requires_action`.
## Tests
- **End to end:** `requires_action` around a child's permission request.
The cancel test now also expects the background child's
`requires_action` before the cancel.
- **Runtime:** overlapping requests, a child that ended while it waited,
and a resume with an open request.
- **Checks:** `npm run check`, build and all 2877 tests pass on this
branch, whose tree is #1257's with `main` merged in. CI runs only on PRs
to `main`, so I ran `ci.yml` on this branch by hand.
The second of three stacked PRs that replace #1257. It's based on #1320,
so its diff shows only the resume part. Merge #1320 first; this PR then
retargets to `main`.
1. #1320: the RFD form for a v1 client that declares `subagents` and
isn't AIR.
2. **This PR:** a child keeps its session across SendMessage resumes.
3. #1322: `requires_action` while a child's permission or question
request is open.
**AIR is unchanged:** it keeps a new session per generation, as in its
draft.
## What changes
The [subagents
RFD](https://github.com/agentclientprotocol/agent-client-protocol/blob/main/docs/rfds/subagents.mdx)
gives a child one session id across every delegation to it. With #1320
alone, a resumed child stays `idle`.
| RFD | With #1320 | Now |
| --- | --- | --- |
| One session id per child, across delegations | a resumed child stays
`idle`, and its resumed work isn't shown | the child runs again in the
same session, under the SDK agent id. The CLI runs a resumed agent under
the SendMessage call's tool id, so that call becomes the child's current
delegation: the resumed run's output and end reach the child |
| The parent's message to the child is an incoming `session_message` |
only the launch prompt | each SendMessage that resumes the child is a
`session_message` with the SendMessage tool use's id. Its sender is the
session that made that call, or left out when unknown. A repeated resume
signal doesn't repeat it |
Out-of-order events, from the reviews of #1257:
- **Late end:** the end of an earlier delegation ends nothing
(`isStaleEnd`). It also no longer settles the resumed run's live task at
the agent level.
- **Late result:** a SendMessage result that arrives after its run ended
resumes nothing (`isEndedDelegation`).
- **Early output:** a resume's output that arrives before its
`task_started` is buffered, then delivered to the child.
- **Reused id:** a run under an id the child used before ends the run,
since the SDK falls back to it.
- **Running patch:** a `task_updated` running patch reports `running`
without its guessed prompt or call.
## Live run
Against real Claude Code (Sonnet), a SendMessage to a finished child ran
it again in the same session. Its message arrived with the SendMessage's
id and the root as sender, and the turn waited for the resumed run. No
schema violations.
## Tests
- **End to end:**
- a SendMessage resume under the SendMessage's tool id: one session, two
prompts, the resumed output in the child, a stale end ignored
- the resumed run's live task kept when an earlier delegation's end
arrives late
- a late SendMessage result
- **Runtime:**
- reuse and resume
- a resume's output buffered before its `task_started`
- the sender of a resume's prompt: the root, a child, or unknown
- a run under a reused id
- a running patch
- a result without a text
- **Mutation checks during #1257's reviews:** removing any of these
rules fails tests.
- **Checks:** `npm run check`, build and all 2873 tests pass on this
branch. CI runs only on PRs to `main`, so I ran `ci.yml` on this branch
by hand.
The first of three stacked PRs that replace #1257, split for review.
Together they bring v1 clients the [subagents
RFD](https://github.com/agentclientprotocol/agent-client-protocol/blob/main/docs/rfds/subagents.mdx),
as revised by agentclientprotocol/agent-client-protocol#2281 and #2308.
**AIR is unchanged**: its golden files don't change.
1. **This PR:** the RFD form for a v1 client that declares `subagents`
and isn't AIR.
2. #1321: a child keeps its session across SendMessage resumes.
3. #1322: a child reports `requires_action` while its permission or
question request is open.
Merge them in that order. Each later PR is based on the previous branch,
so its diff shows only its own part.
## Who gets what
- **AIR** (any client that declares `_meta.jetbrains.air`): the earlier
draft it implements, exactly as before. That's `subagent_spawned`,
`subagent_state_update`, a session per generation, the hidden Agent/Task
tool call, and draft replay. AIR keeps it whichever signal it declares.
- **A v1 client with `clientCapabilities.subagents` that isn't AIR:**
the RFD form below. SDK 1.8.0 types it (`subagent_update`,
`session_message`, the v1 `StateUpdate`).
- **Without either signal:** nothing changes.
`subagentForm` (`src/acp-subagents.ts`) picks the form.
`NativeSubagentRuntime` keeps the routing, buffering and nested lineage,
and renders either form.
## The RFD form
| RFD | Before | Now |
| --- | --- | --- |
| Announce the child before any of its traffic | `subagent_spawned {
name, task, prompt }` | `subagent_update { sessionId, title,
description, state: { state: "running" } }` |
| `description` is the role or purpose, "not a transcript of
instructions" | `task` was the prompt | `title`: the agent's `name`,
with its role (`subagent_type`) after it, else the role. `description`:
the Agent input's short `description` |
| The parent's message to the child is an incoming `session_message` |
`prompt` on the announcement | a `session_message` in the child's
transcript, with the Agent/Task tool use's id and the session that made
the call as sender |
| Delegation tools stay tool calls | the Agent/Task tool call was hidden
| it stays a tool call of the session that made it, with the report its
model got. Its heartbeats and result stay there too |
| Work-state snapshots, not a terminal lifecycle | `completed`,
`failed`, `cancelled`, `disconnected` | `running`; `idle` with
`end_turn`, `cancelled`, or `error` with the SDK's error text as its
JSON-RPC `error`; `idle` with no stop reason for work that ended without
a known reason (a worker restart, or still running when the stream ends)
|
| `idle` isn't terminal | later updates were dropped | an idle child
still gets its updates, such as its background work's |
| A cancel stops the work it waits on; other descendants are up to the
Agent (#2308) | `session/cancel` ended every child as cancelled | the
adapter ends no child itself. Claude Code's interrupt stops the
foreground children, and currently background ones too; each reports
`idle`/`cancelled` from the SDK's events, and the foreground ones'
requests are withdrawn |
| Never guess a parent | a child that ended before its spawning frame
was announced under the root | it stays unexposed. A nested child waits
for its parent's announcement |
| Never move a tool call | | a tool call that a permission request
emitted on the root before its child was announced stays on the root
after a cancel. AIR keeps the cancel's cleanup, since its draft ends
every child there |
| No agent-side capability | `sessionCapabilities.subagents` for every
client | for AIR only |
## Not in this PR
- **SendMessage resumes** (#1321). Until then a resumed child stays
`idle`. Requests find a child by its agent id, so only the permission
and question requests of the resumed run appear in its session. A resume
never opens a second session for the child, which the RFD forbids, and a
test pins that.
- **`requires_action`** (#1322).
- **Replay** doesn't expose children yet. Today's replay invents
`<session>:replay-subagent:<id>` ids, and the RFD requires the original
ones. The RFD makes child replay a SHOULD, so an RFD client's replay
leaves children out until the replay PR.
## Settled during the review of #1257
- **Cancel cascade:** the RFD leaves background children to the Agent
(#2308). An agent-level test pins #2308's validation scenario.
- **Session ids across forks:** the raw SDK agent id stays the session
id. The SDK's fork copies no subagent history, so a fork can't repeat an
id under another root. The reasoning is on `nextChildSessionId`.
- **Held turns:** the adapter holds a v1 prompt open while a background
subagent the turn started runs. A cancel still settles the prompt.
## Live run
Against real Claude Code (Sonnet), with a v1 client that declares
`subagents` and checks every update and permission request against the
SDK's v1 schema, there were no schema violations:
- **Launch:** `running` with the title (`scout (general-purpose)`) and
description, the prompt as a `session_message` from the root, and the
child's tool calls in its session. Then `idle`/`end_turn` before the
Agent call completes on the root.
- **A 40-second child:** the Agent call's heartbeat and result stay on
the root. Before the fix, they moved to the child, because the heartbeat
named the Agent call as its own parent.
- **Cancel:** a foreground child is `idle`/`cancelled` 15 ms after
`session/cancel`, and the prompt returns `cancelled`. Claude Code
stopped a background child too (its metadata says `stoppedByUser`).
- **Found on `main`, for every client, and fixed separately:** after a
cancel, a tool call that was running never gets a final status.
## Tests
- **AIR:** the end-to-end tests of the earlier draft run with an AIR
client that declares `nativeSubagentSessions` (`AIR_NATIVE_SUBAGENTS`).
The AIR golden files are unchanged.
- **RFD, end to end:**
- announcement and prompt
- a failure with the SDK's error, also when the error arrives after the
failure
- a stop, and a worker-restart orphan
- no draft updates
- the cancel per #2308
- the raced tool call after a cancel, kept on the root, with AIR's
cleanup kept
- the Agent call's heartbeat
Every update is checked against the SDK's v1 schema.
- **RFD, runtime:**
- the visible control tool call, also nested
- labels, also from a late frame
- an unparented child staying unexposed, and a nested child announced
only after its parent
- nothing reported at the parent's cancel
- the end of the stream, and `unknown`
- a resume opening no second session
- **Plain/Zed comparison with origin/main:** it now allows the missing
agent capability, which `compare.ts` documents.
- **Mutation checks during #1257's reviews:** removing any of these
rules fails tests.
- **Checks:** `npm run check`, build and all 2863 tests pass.
## Release
Titled `feat:`, because it changes what a v1 client that declares
`subagents` receives.
### Summary
Addresses [IJAI-2956](https://youtrack.jetbrains.com/issue/IJAI-2956).
- Recognize Central only when the active key source is `apiKeyHelper`
and its effective helper command contains the whole word `central` and
the word sequence `proxy start`, case-insensitively, allowing multiple
whitespace characters.
- Read the effective command through the existing `SettingsManager`/SDK
settings resolution, including project/managed overrides, rather than
reimplementing configuration merging or executing helpers.
- Return `kind: gateway` and the exact label `JetBrains Air Gateway`,
without `detail` or invented account identity. URL, flags, routes, and
endpoint ownership are intentionally not checked: this is an agreed weak
display heuristic, not proof of provenance or entitlement.
- Render ordinary helpers as `API key helper` instead of raw
`apiKeyHelper`; do not expose unknown key-source identifiers. Preserve
external backend and client-owned configuration priority, CLI/SDK
merging, stale-probe protection, and duplicate suppression.
- Add mapper and ACP-agent regression coverage for positive/negative
commands, overrides, CLI/SDK results, and source changes; update
`docs/air-extensions.md`.
Examples matching the heuristic include `central proxy start` and
`/opt/bin/CeNtRaL PrOxY StArT --arbitrary-flag`. `decentralized proxy
start`, `central start`, and an inactive helper do not match.
### Sanitized auth status
```json
{
"kind": "gateway",
"label": "JetBrains Air Gateway"
}
```
No helper command, key, header, private route, or invented account
information is sent.
### Verification
Based on fresh upstream `main` at `0724b17`, rechecked immediately
before publication. Changes and rebuilt `dist` are available in the main
local clone; the user confirmed the local adapters work.
```bash
npm run build
npm run lint
npm run test:run
```
- Build and lint passed.
- Full test suite: **2484 passed, 30 existing skipped** across 44 passed
test files and 4 skipped files.
- No new skip flags or disabled tests were used.
### Scope
No AIR UI, provisioning, personal configuration migration, effort/mode
changes, or new ACP protocol. Plan files and personal configurations are
not committed.
---------
Co-authored-by: Junie <junie@jetbrains.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Andrey Bragin <andrey.bragin@jetbrains.com>
## Problem
A v1 report's `_meta` belongs to that report, and the agent gives each
report its own `_meta.claudeCode` keys. A v2 client stores a tool call's
`_meta`, and any report that carries `_meta` replaces it
(`tool-calls.mdx`; the migration guide since
agentclientprotocol/agent-client-protocol#2355). So a v2 client kept
only the last report's keys. For example, a result's `{ toolName }`
replaced the denial reason that came before it. On top of that, a
PostToolUse hook stored the whole `tool_response` in `_meta`, which for
a Write is the whole file text.
## Change
All of this is v2 only. No v1 or AIR output changes, and no v1 golden
changes.
- **Stored `_meta` (`src/v2/tool-call-meta.ts`).** The v2 bridge keeps
each tool call's `_meta` the way the client stores it. `claudeCode` keys
merge one by one, and every other key replaces whole, the same model
`ToolCallFieldTracker` uses.
- A report that changes the stored `_meta` carries all of it.
- A report that changes nothing carries no `_meta`, which leaves the
stored value unchanged.
- A permission request's subject always carries the stored `_meta`,
since a client can show the request on its own.
- The tool call's first report starts from nothing.
- **`toolName` becomes `name`.** `claudeCode.toolName` repeats the
tool's name, which v2 has a field for. It becomes the `name` of a tool
call that has none yet, and is left out otherwise. A memory recall gets
a `name` this way. Subagent routing still reads `toolName` on the
agent's v1 reports, before the bridge.
- **The `toolResponse` AIR gets.** A v2 client also keeps `_meta`, so it
gets AIR's trimmed `toolResponse`:
- a hook carries only the `status` and `isAsync` markers, not output the
content already shows;
- a denial carries the SDK message only when it differs from the reason.
## Evidence
- **v2 goldens:** 28 change. Most only lose `toolName`. Hook reports
lose the repeated stdout or file text. Memory recall gains `name`. The
denial keeps its reason type and message. Subagent tool calls and their
permission subjects keep `parentToolUseId`.
- **Live, CLI 2.1.293 on Haiku, v2:** a Write and a Bash command arrived
with `name` on their first report and no `_meta` at all.
- **Tests:** 7 unit tests for the stored `_meta`.
- **Mutation checks:** removing any of these 9 rules fails at least one
test:
- naming once;
- leaving `toolName` out;
- merging with earlier `claudeCode` keys, which also fails the
`subagent-late-child-update` golden;
- keeping other keys;
- omitting unchanged `_meta`;
- starting fresh;
- the subject's stored `_meta`;
- the bridge wiring;
- the trimmed `toolResponse`.
Forgetting a closed session's tool calls is memory cleanup that no test
observes, like `V2Terminals.forget`. A limit of 2048 tool calls also
bounds the memory.
- `npm run check`, build and all 2820 tests pass.
## Problem
The v1 schema says a forked session is active once the agent responds,
and can be prompted without `session/load` or `session/resume`
(agentclientprotocol/agent-client-protocol#2359). `session/fork` only
copied the transcript, so prompting the new id failed with "Session not
found" until the client loaded or resumed it.
## Change
- **The fork starts the new session the way a resume does.** It starts
from the copied transcript, with the model and the permission mode that
transcript records, and with the request's `cwd`, MCP servers,
additional directories and `_meta`. The response carries the session's
`modes` and `configOptions`, and the available commands follow it, as
for `session/new`.
- **A client that loads or resumes after a fork keeps working.** A later
`session/load` replays the history into the running session, and a later
`session/resume` returns it. Neither starts a second Claude Code
process. A load or resume with other settings restarts the session, as
for any loaded session. The fingerprint that decides this ignores the
AIR fork point in `_meta`.
- **Cost:** each fork now starts a Claude Code process. That added about
0.65 s to the fork response in the live run.
- **v2:** the v2 fork used to resume the forked session itself. It now
uses the session that the v1 fork starts, so the v2 bridge drops its own
resume.
- **AIR docs:** `docs/air-extensions.md` now says, under the session
fork point, what a load or resume after a fork does.
## Evidence
**Live, CLI 2.1.293 on Haiku, over v1:**
1. A new session answered "Remember the codeword PELICAN" with `OK`.
2. `session/fork` returned the fork with mode `auto` and the `mode`,
`model` and `effort` config options.
3. Prompting the fork right away returned `PELICAN`, with no load or
resume in between.
4. A `session/load` of the fork then replayed its history and was ready
in 4 ms. The timing log shows one session start for the fork and none
for the load, and a further prompt still answered.
**Tests:**
- New: the fork can be prompted at once, and its response carries modes
and config options; a later resume and load reuse the session; and the
fork fails when its session can't start.
- The existing fork tests now also check that the session starts from
the fork, with the request's additional directories.
- The v2 fork tests pass unchanged.
- **Mutation checks:** removing the start, the response's `modes`, or
the additional directories each fails a test.
- `npm run check`, build and all 2813 tests pass, with no golden
changes.
## Summary
When the user approves a plan through ExitPlanMode, a v2 client now gets
it as the session's markdown plan. The update uses the draft's unstable
plan operations:
```json
{ "sessionUpdate": "plan_update", "plan": { "type": "markdown", "planId": "plan-mode", "content": "# Plan…" } }
```
Until now a v2 client saw the plan only in the "Approve Plan" tool call
and its permission request.
## Behavior
- **Its own plan id.** The approved plan has the id `plan-mode`, and the
TodoWrite checklist keeps `plan`, so the client shows both. Claude Code
keeps one plan file per session and rewrites it on a later plan mode, so
each approval replaces the plan before it. Nothing removes it.
- **A normal approval** is a successful ExitPlanMode result. The plan
follows the tool call's result, live and on replay.
- **Live:** the plan comes from the tool's structured output, which
includes edits the user made to the plan.
- **Replay:** the SDK's `getSessionMessages` drops the structured
output, but the transcript keeps the `plan` that Claude Code adds to the
tool's input.
- **An approval that clears the context** ends the tool with an error
result. The restart into the fresh context publishes that plan, after
the new mode and config options and before the fresh context runs. It
does so only once that context exists, so a cancel or a failed restart
leaves no plan behind that was never carried out.
- **Not published:** a rejected plan, a subagent's plan
(`parent_tool_use_id` or `isAgent`), a plan still waiting for its team
lead, and an empty plan. Plans are trimmed.
- **Who gets it.** The agent sends plan operations only to a client that
advertises v1's draft `plan` capability, as the v1 draft requires. The
v2 bridge advertises it for every v2 client and passes `plan_update` and
`plan_removed` through unchanged, since the shapes match. No v1 client
advertises `plan` today, so v1 behavior doesn't change.
## Replay limits
- **After a "clear context" approval, replay doesn't show that plan.**
It reads the transcript from before the clear, where the approval is the
deny, so it shows the plan approved before that, or none. Replay never
reaches the conversation after a clear, so this is part of an existing
gap.
- **A plan approved before a compaction boundary isn't replayed**, like
the rest of the history before it.
- **Replay can't apply the subagent and team-lead checks**, since they
come from the structured output that `getSessionMessages` drops. A
subagent's transcript still carries its `parent_tool_use_id`, so it's
skipped.
## Evidence
**Live, CLI 2.1.293 on Haiku, through the adapter on v2 in plan mode:**
- **Normal approval:** the plan arrived right after "Exited Plan Mode",
and resuming with replay republished it.
- **"Clear context":** the plan arrived after the switch to auto mode,
before the fresh context's first tool call.
- **Raw SDK probe:** the structured result carries `plan`, `isAgent` and
`filePath`, and the transcript's tool use keeps `plan` and
`planFilePath`.
**Tests and checks**
- **Result path:** unit tests for each rule and for the order. They
include structured output versus input, input-only as on replay, and
structured output with no plan.
- **Restart path:** coordinator tests check that the plan comes after
the session state and before the continuation, that a client without the
capability gets none, and that a failed restart publishes none.
- **Agent:** a client that advertises `plan` gets the restart's plan,
and one that doesn't gets nothing.
- **v2:** a replay test and translation tests. The v2
`exit-plan-approve` golden gains the plan update. `exit-plan-reject` and
every v1 golden are unchanged.
- **Mutation checks:** removing any rule on either path fails at least
one test. That covers both capability checks, the agent's capability
wiring, success only, structured output first, the order, trimming, and
the `plan_removed` pass-through.
- `npm run check`, build and all 2810 tests pass.
## Problem
After a cancel, the consumer drops the main conversation's consolidated
`assistant`/`user` messages until Claude Code starts a model request
that serves none of the cancelled prompts (#1309). `stream_event` frames
skipped that check. Claude Code always streams, so when it had already
taken an abandoned prompt off its queue, the prompt's answer still
streamed to the client as deltas. Only the consolidated copy was
dropped.
That output arrives after the cancel has been reported: on v1 after the
turn's `cancelled` response, and on v2 after `idle cancelled`, outside
any cycle. Both protocol versions require an agent's updates to come
before that report. Streamed tool calls leaked the same way.
#1309's tests missed this because they scripted only consolidated
messages.
## Change
- **After the client has been told the stopped work ended**, while the
window is still open, streamed text, thinking and tool calls are dropped
like the consolidated messages they belong to. On v1 that report is the
turn's prompt response (no active turn). On v2 it's the idle state (no
open foreground work). The v2 signal also covers cycles that Claude Code
starts on its own and turns that v1 holds for their subagents.
- **Before that report**, what the interrupt flushes still streams, as
it does today. Both drafts allow updates between the cancel and the
cancelled report, and the text is in Claude Code's transcript, so a
reload shows it anyway. Existing tests pin this: v2's queued-prompt
cancel, a held turn cancelled mid-follow-up, and a cancel that arrives
during a buffered backlog.
- **A prompt that is merely queued no longer keeps the window open.**
#1309 held the window while any queued prompt was unsettled. So a
follow-up that Claude Code ran ahead of a prompt sent after the cancel
lost its consolidated copy, and with this change it would have lost its
streamed copy too. Now a request holds the window only when:
- the stopped turn is still unsettled;
- an abandoned prompt's result is still expected;
- the request names a cancelled prompt; or
- the request names an unsettled prompt. That covers one that arrived
while the cancel was still awaiting, before the cancel records it.
- **Per-block drop latch.** Where the consolidated message delivers the
text, a stream that loses a delta keeps dropping until its streamed-text
record resets: at the next message, or when a consolidated message
consumes the record. If a window closes mid-block (an older CLI's late
prompt echo), the record holds nothing, so the consolidated message
delivers the whole block once. Without the latch the record would hold
only the tail, which isn't a prefix of the text, and the client would
get the tail and then the whole text again. A client that gets subagent
text only streamed has no consolidated copy to fall back on, so its
subagent streams don't latch.
- Bookkeeping for dropped events (message id, usage, compaction
heartbeat) is unchanged.
## Evidence
**Tests**
- The "output after a cancel" suite now streams every answer the way
Claude Code does, with Claude Code's follow-up in two chunks. Without
the fix, 9 of its tests leak the streamed copy.
- New v1 tests:
- a follow-up that runs ahead of a prompt sent after the cancel;
- a prompt sent during the cancel whose request arrives before the
cancel abandons it;
- an echo in the middle of a two-block answer;
- a subagent stream for a client that gets subagent text only streamed.
- New v2 tests:
- an abandoned prompt's streamed answer;
- what the interrupt flushes of a cycle that Claude Code started;
- a held turn's follow-up that the cancel stopped before it showed
anything.
- **Mutation checks:** each of these fails at least one test:
- removing any of the window's four rules, or restoring #1309's hold for
any queued prompt;
- removing the drop;
- dropping the flushed tail before the report too;
- using the v1 signal on v2;
- removing the latch, either of its record resets, or the subagent
condition.
The exception is clearing the latch when a subagent finishes. That's
memory cleanup that no test can observe, like the
`streamedBlocksByParent.delete` beside it.
- `npm run check`, build and all 2796 tests pass, with no golden
changes.
**Live, CLI 2.1.293 on Haiku, v1 and v2**
- A plain cancel mid-answer, and cancels with a background command
finishing during or after the cancelled turn.
- Nothing of the cancelled turn arrived after its report.
- Claude Code's follow-up after the cancel streamed in full. On v2 it
came in its own `running` … `idle end_turn` cycle.
- An abandoned prompt that Claude Code had already dequeued is a narrow
race through the adapter, so I didn't reproduce it live. The tests
follow the order a direct CLI probe recorded for #1309.
## Not changed
- A dropped prompt that runs a tool can still surface it after the
cancel, through `canUseTool` (tool call plus permission request) and the
PreToolUse preview hook. Neither checks the cancel. A check there would
read the consumer's state, which lags the CLI's control channel, so this
needs its own design.
- On CLIs without `request_marker_lists_v1`, the window still lasts
until the next prompt's echo. Claude Code's own follow-ups in that
window now lose their streamed copy as well as the consolidated one. The
bundled CLI has the marker.
A Bash call that sends its command to the background returns as soon as
the command detaches, and its tool result carried `terminal_exit`. So a
client that renders terminals, whether Zed's terminal extension or a v2
display terminal, showed the command's terminal as exited, with no code,
at launch, while the command ran on.
## What changes
For a client that renders terminals and isn't AIR:
- **At launch:** the tool result of a command in the background leaves
the exit out (`withRunningTerminal`). The tool call still completes; the
v2 draft keeps "Terminal exit and tool call status are independent".
- **When the command's task ends:** the consumer sends `terminal_exit`.
It does so at the task's `task_notification`, or at its terminal
`task_updated` if that comes first. The update is routed like the tool
call, so a subagent's command ends in the subagent's session.
- **No exit code.** Claude Code names the code only in the
notification's summary text ("…failed with exit code 3"), which the
adapter doesn't parse. `completed` doesn't mean 0 either: Claude Code
accepts some non-zero codes as a success, such as grep's 1.
The terminal still exits at the tool result, as before, in four cases:
- **A fast command** whose task ended before its tool result.
- **A task that started after the tool result.** Claude Code sends
`task_started` first, but the existing `bash-background` scenario
scripts the reverse, so its goldens don't change.
- **AIR,** which shows the command through its async tasks.
- **Replay,** where the command from before the reload no longer runs,
and the structured tool result isn't available anyway.
## Evidence
- **Live, CLI 2.1.293, through the built adapter over ACP:**
- **v2:** the terminal stays running when the Bash call completes and
the turn goes idle. `terminal_update` with `exitStatus: {}` arrives when
`sleep 5` finishes, before Claude Code's follow-up.
- **v1 with `terminal_output`:** no exit at the Bash result;
`terminal_exit` with code `null` arrives when the command finishes.
- **Recorded, CLI 2.1.293:**
- the order is `task_started` (`local_bash`, `is_backgrounded: true`),
then the Bash result with `tool_use_result.backgroundTaskId`, then
`task_updated` and `task_notification` when the command ends;
- neither event carries a structured exit code.
- **Tests:**
- v2: the terminal runs until the task ends, with one exit after the
turn's `idle`; and a task that ended before the result exits at the
result.
- v1 with Zed's terminal extension: the exit comes after the prompt's
answer. AIR keeps its exit at the result.
- Unit tests for `withRunningTerminal`, including dropping a `_meta`
that would be left empty, since an empty `_meta` would clear what a v2
client stores.
- **Mutations:** removing the strip, the end-of-task exit, the liveness
guard, or the AIR guard each fails a test.
- `npm run check`, build and the full suite pass, with no golden file
changes.
A follow-up to #1310, from its review, which found no regressions but
two wrong answers. Both come from one choice in #1310: a request from an
agent without a `liveBackgroundTasks` record put v2's foreground work in
`requires_action`.
**When an agent has no record:**
- **A teammate:** it never gets one.
- **A settled subagent:** settling deletes its record, and settling
didn't re-check open requests.
- **A foreground subagent nested in a background one:** Claude Code
leaves it out of `background_tasks_changed`, so the level reconciliation
prunes it after two activations.
The main conversation waits on none of them. A background subagent's
request that the consumer read before its `task_started` also flickered
from `requires_action` to `running`.
## What changes
- **An agent without a record no longer blocks the foreground work.** A
subagent the main conversation waits on has a record by the time it
asks: its `task_started` comes first on the wire, and nothing prunes it
while the main turn waits. When the consumer reads the request first,
the `task_started` checks again, so `requires_action` comes slightly
later instead of a flicker for background subagents.
- **Settling a task re-checks** the open requests.
- **The comment on `nativeSubagentParentByToolUseId`** no longer claims
`parent_task_id` is unread.
## Tests
- **Replaced:** "stops waiting for a request once its subagent turns out
to run in the background". The new test checks that a request read
before its `task_started` doesn't block, then blocks once the
`task_started` says foreground.
- **New:** a foreground subagent's open request stops blocking once
Claude Code stops that subagent.
- **Mutations:** restoring "no record blocks" fails both tests; dropping
the re-check at settle fails the second.
- `npm run check` and the full suite pass, with no golden file changes.
v2's foreground work reported `requires_action` whenever any permission
request or question in the session was open, including a background
subagent's. The draft keeps `requires_action` for foreground work that
is blocked on user action, and a background subagent asks without
blocking the main conversation. So a v2 client saw a running turn as
waiting on the user while it kept working.
## What changes
A request blocks the foreground work when it is:
- the main conversation's own request, or
- the request of a subagent that runs in the foreground of the main
conversation, so the tool call that spawned it waits on it. This applies
up a chain of such subagents.
A request from a subagent in the background, or from one nested inside
it, no longer counts.
- **Where each task runs.** The adapter records this per task:
- from `task_started.is_backgrounded` and `parent_task_id`;
- from a later `task_updated` patch that moves the task to the
background;
- Claude Code always resumes a subagent in the background.
- **Unknown subagents.** A subagent without a record still counts,
because its request can arrive before its `task_started`. Registering a
task, or moving one to the background, checks the open requests again.
- **Requests that name no agent** still count: MCP elicitations and
dialogs.
- **Steering is unchanged.** It still treats any open request as
blocking. `Session.pendingUserInputCount` becomes
`Session.openUserInputs`: the open requests, each with the subagent that
asked.
- **v1 is unchanged.**
## Evidence
- **Live, CLI 2.1.293 via the SDK with a logging `canUseTool`:**
- `task_started` carries `is_backgrounded: true` for a background
subagent and `false` for a foreground one.
- A subagent's `canUseTool` call carries `agentID` equal to its
`task_started.task_id`.
- `task_started` arrived before the subagent's request in both cases.
- `parent_task_id` for nested subagents was not checked live; it's
documented in the SDK types and covered by a test.
- **6 new v2 tests:**
- a background subagent's permission request leaves the turn `running`,
and so does its question;
- a foreground subagent's request reports `requires_action`;
- a foreground subagent launched by a background one doesn't block;
- a request that arrives before its subagent's `task_started` stops
blocking once the subagent turns out to run in the background;
- a request stops blocking once Claude Code moves its subagent to the
background.
- **Mutation checks.** Removing each rule in turn fails at least one
test. That includes passing the subagent through for permission requests
and for questions, the recheck at registration and at `task_updated`,
and the walk up the chain.
- `npm run check`, build and the full suite pass, with no golden file
changes. Two resume tests now expect the resumed task to be recorded as
backgrounded.
After a cancel, Claude Code ends the interrupted turn with an aborted
result, then keeps working through its queue, and reports `idle` once at
the end. The queue can hold a prompt it had already taken off it, then
its own follow-ups, such as the summary of a background command that
finished. The adapter settled a cancelled turn only at that final
`idle`, and dropped everything in between until the next prompt
activated. As a result:
- **v1:** a cancelled `session/prompt` waited for any follow-up queued
behind it to finish.
- **v2:** a follow-up after a cancel streamed as text with no `running`
or `idle`.
This PR ends the cancel where Claude Code's own messages say the stopped
work ends.
## What changes
- **Where a cancelled turn settles.** It now settles at the result of
the work the interrupt stopped: its own result, or, for a turn held open
for its subagents, its follow-up's aborted result.
- The `idle`, the next echo's hand-off and the force-cancel backstop
still settle a turn whose result never comes.
- That result owes its trailing `idle` like any settling result, a
steered turn's included.
- **When the cancel ends.** The cancel records the prompts it stopped:
the unsettled turns and their steers when it arrives, and whatever it
abandons when it sweeps the queue.
- With `request_marker_lists_v1`, every `status: requesting` frame lists
the prompts its model request serves. A cycle Claude Code starts on its
own lists none.
- The cancel ends at the first request that serves none of the recorded
prompts, once no turn is unsettled and no orphan result is outstanding.
Compaction updates resume there too.
- A prompt Claude Code had already dequeued names itself, so its answer
stays dropped even when the interrupt receipt leaves it out.
- Without the capability, the cancel ends at the next activation, as
before.
- **Abandoned prompts' results.** A result that names a cancelled prompt
never promotes the next queued prompt, so a prompt sent after the cancel
can't take an abandoned prompt's result.
- **Held turns.** Since CLI 2.1.270, Claude Code reports `running` for
as long as background agents live. So with request markers, a held
turn's follow-up counts as live only when a model request has started
since the turn's result. A cancel while only the subagent runs settles
the held turn at once.
- **v2: aborted cycles.** A cycle whose result is aborted
(`terminal_reason` `aborted_streaming` or `aborted_tools`) ends
`cancelled`.
## Evidence
**What CLI 2.1.293 sends.** I recorded the stream live with a probe that
drives the SDK the way the adapter does. After an interrupt:
1. The interrupted turn's aborted result comes first.
2. Next, any prompt Claude Code had already taken off its queue runs.
Its request names it.
3. Then its own follow-ups run. Their requests name no prompt.
4. Finally, one `idle`.
The interrupt stops background agents, but not background commands.
**An audit of the bundled CLI** found exactly one source of `status:
requesting` frames: one per main query-loop iteration. Subagents,
compaction, side queries, hooks and retries emit none, or only a named
one.
**The adapter, end to end over ACP against the live CLI**, this branch
against `main`:
| Scenario | `main` | This PR |
| --- | --- | --- |
| v1: a background command finishes while the turn the user cancels
streams | `session/prompt` answered 14.1 s after the cancel | answered 4
ms after the cancel; the follow-up's text arrives after |
| v2: same | follow-up text with no `running`; `idle cancelled` 14.8 s
after the cancel | `idle cancelled` 10 ms after the cancel, then
`running`, the follow-up, `idle end_turn` |
| v2: a background command finishes after the cancelled turn | `idle
cancelled`, then text with no `running` or `idle` | `idle cancelled`,
then `running`, the follow-up, `idle end_turn` |
| v2: cancel while idle, then a background command finishes | text with
no `running` or `idle` | `running`, the follow-up, `idle end_turn` |
| v1: cancel while a background subagent holds the prompt open | (not
compared) | answered 2 ms after the cancel |
## Tests
- **20 new tests, scripted on the recorded orders.**
- v1 suite "output after a cancel" (12): a cancelled turn and a cancel
while idle; a dequeued prompt the receipt leaves out; a steer; a prompt
that Claude Code folds into its own follow-up; a prompt sent while the
cancel is still in progress; a repeated cancel; trailing idles after a
cancelled turn and after a steered one; older CLIs without request
markers.
- Held turns (3): a cancelled held turn settles at its follow-up's
aborted result, not at a placeholder result, and at once when only its
subagent runs.
- v2 (5): the follow-up after a cancelled turn as its own cycle; a
cancel while idle; a later cycle after a cancelled one; a cycle Claude
Code started before the cancel arrived; a follow-up's compaction.
- **Mutation checks.** Removing each rule in turn fails at least one
test. Two exceptions:
- Clearing the record at activation can't be observed.
- Holding for any unsettled turn, not only a recorded one, can't be told
apart from activation.
- `npm run check`, build and the full suite pass, with no golden file
changes.
## Review
The design went through two rounds of independent review.
- **The first attempt, rejected.** It judged "the stopped work is over"
from the adapter's own bookkeeping. Review found that the interrupt
stops what Claude Code is running, which the adapter may not have seen
yet. That attempt is not in this PR.
- **This design.** A second round audited the CLI's signals and the
state machine. This PR fixes what it found:
- a prompt sent after a cancel could take an abandoned prompt's result;
- a held turn could settle at a placeholder result;
- the window could close while an abandoned prompt that Claude Code
folds into its own follow-up was still due;
- a prompt sent during the cancel's awaits wasn't recorded;
- a held turn's follow-up was misread as live on CLI 2.1.270+.
## Known limitations
- **The cancelled turn's last streamed text still arrives after the
cancel**, as on `main`: the cancel never held streamed text back.
- **If the cancel lands just after Claude Code started its own
follow-up**, the interrupt stops that follow-up, and its partial output
gets through. On v2 it ends `cancelled`.
- **Trailing-idle debt can be over-counted by one in a drain run.** The
next `running` transition sweeps it, as before.
Stacked on #1304, which this targets; it retargets to `main` once #1304
merges. Together they replace #1303.
## What a v2 client gets now
**`idle` at a turn's result,** also when v1 holds the turn's answer for
the background subagents it spawned (`Turn.deferredSettle`).
- The subagents' output and permission requests arrive while the session
is idle. The draft allows that: background activity may send updates
while idle, and they don't change the state.
- A background request while idle no longer shows `requires_action`,
which the draft reserves for foreground work.
- The hold itself is unchanged. It now only delays v1's answer, with no
v2 branch in the hold logic.
**Model cycles that Claude Code starts on its own** are foreground work:
the follow-up after a background subagent or command finished, or its
answer to a message from another session.
- A cycle reports `running` before its first output, `requires_action`
while it waits, then `idle` with its own stop reason, usage and
`_meta.quota`.
- An error result gives `idle` with the `error` stop reason, and a
cancel gives `idle cancelled`.
- Before this, such a cycle streamed while v2 said `idle`.
**Take-overs:** a prompt that Claude Code takes in during a cycle takes
it over, with no new `running` and no `idle` in between. So do a steer
that resumes a held turn, and the continuation of an accepted
clear-context plan. In both, the final `idle` carries the turn's usage,
not just the last cycle's.
v1 and AIR clients are unchanged.
## How
All of this builds on #1304's `ForegroundEvents`:
- **A turn's work ends at its result:** `endForeground` in the defer
branch of `settleOrDefer`, and where the steer idle lane re-applies a
hold.
- **A cycle starts** (`startAutonomousCycle`) at model output of the
main conversation while no work runs.
- Subagent output doesn't count.
- Without command lifecycles, output while a prompt is queued stays that
prompt's, since its output can come before its echo. With lifecycles
(`msg_lifecycle_v1`), a prompt Claude Code hasn't started has no output
yet, so a cycle starts. This narrows the gap that #1303 left.
- **A cycle ends:**
- at a result no turn took, except a placeholder result (`num_turns:
0`);
- with `cancelled` at the diagnostic of an ExitPlanMode answer, as a
turn does, unless a held turn continues the accepted plan;
- at an SDK `idle` that no earlier result owes;
- when the stream ends or fails;
- before `session/close` answers.
- **Starting work while a request is open** reports `requires_action` at
once.
- **The cycle's stop reason** comes from its result, as for a turn
(`autonomousCycleEnd`). Its `_meta.quota` uses the same builder as a
turn's (`quotaMeta`, extracted from `turnQuotaMeta`).
## Checks
- `npm run check`, `npm run build` and all 2756 tests pass. No golden
file changes against #1304: no recorded scenario has a held turn or
output while no turn is active.
- New tests:
- **14 v2 tests:** #1303's eleven, plus a held turn reporting `idle` at
its result with its follow-up as a cycle and a background request while
idle, output before a queued prompt that Claude Code reports it hasn't
started, and `session/close` during a cycle;
- **agent:** a steer resuming a held turn's work; the follow-up that
ExitPlanMode's "keep planning" interrupts ending `cancelled`; the
clear-context continuation taking the cycle over, with the turn's usage;
- **turn events:** work that starts while a request is open waits at
once.
- I made 20 mutations, one per rule above, and each failed a test. The
take-overs for a steer and for the clear-context restart first survived,
since a cycle stood in for the turn with the same states. The tests now
check the usage of the final `idle` too.
## Not covered
- No recorded scenario has such a cycle. The start signal (the first
main-thread output) is chosen from the agent's side, not confirmed
against a live CLI.
- After a cancel, the agent drops main-thread output until the next
prompt (`session.cancelled` stays set). So a follow-up that Claude Code
runs after a cancel is still lost, for v1 and v2. That predates this PR,
and I'll fix it separately.
The first of two PRs that replace #1303, after a design review. This one
restructures how the agent reports v2's state, with two small changes in
behavior (below). The next PR makes v2 report `idle` at a turn's result
and adds model cycles that Claude Code starts on its own.
## Why
The agent reported each turn's v2 states (`running`, `requires_action`,
`idle`) through the prompt's `TurnEvents`, the same events that answer
the prompt. That ties v2's state to when **v1** gets its answer. The
clearest case is the hold (`Turn.deferredSettle`): v1 holds a turn open
while the background subagents it spawned run, because a v1 client stops
listening at the prompt response. So v2 stays `running` too.
Making v2 report `idle` at the turn's result in that design would need a
v2 branch inside the hold logic. That's the most intricate code in the
adapter: steering, cancel, the echo hand-off, ExitPlanMode, idle debts.
And a cycle that Claude Code starts on its own would need a second
source of v2 state beside the turn's (#1303).
## What changes
- **`TurnEvents` only answer the prompt:** `inserted`, `ended`,
`failed`. v1 answers at `ended` or `failed`. v2 answers at `inserted`,
and uses `ended`/`failed` only to reject a prompt before insertion.
- **New `ForegroundEvents`** (`src/turn-events.ts`): the session's
foreground work, meaning what a client would wait for before sending the
next prompt. Events: `running`, `awaitingUser`, `ended`, `failed`.
- Only the v2 surface supplies them, through the new `foreground`
option. They map to `state_update` in `v2Foreground`.
- A prompt's turn is the foreground work from its insertion until it
ends, exactly as before. So `idle` still waits for a held turn's
subagents; the next PR changes that.
- **The work is keyed by the session id the client knows,** not stored
on a `Session`. A clear-context restart (an accepted ExitPlanMode with a
fresh context) replaces the Claude Code session behind that id and moves
the running turn to it. Work stored on the old `Session` would stay
behind.
- **Requests report through the work** (`syncAwaitingUser`), not through
the active turn.
## Observable changes on v2
1. **The `session/prompt` response now comes before `running`, not after
it.**
- The 38 v2 golden files change by exactly that, and nothing else; I
checked every file with a script.
- The old order was not guaranteed: the SDK's `notify` writes after
`waitUntilInitialized(...).then(...)`, and the response is written once
the handler's promise resolves. The old code won that race by sending
`running` before resolving.
- The draft lets clients receive the updates before or after the
response.
2. **A request that Claude Code opens for a prompt it started, before
the prompt's echo, now reports `requires_action` when it opens,** rather
than at the echo. The prompt's work is already running then.
v1 and AIR clients are unchanged.
## Checks
- `npm run check`, `npm run build` and all 2739 tests pass.
- Every v2 state test in `acp-v2.test.ts` passes unchanged.
- `turn-events.test.ts` now reads the waiting events from the
foreground.
- New tests:
- a request opened before the echo;
- the work staying with the session id across a clear-context restart,
with a permission request in the continuation.
- I made six mutations and each failed a test: no `running` at
insertion, no end on `resolve`, no end on `reject`, waiting never
reported, waiting only for the active turn, and the work tied to the
`Session` object.
IDEs can pass their own Claude hooks through
`_meta.claudeCode.options.settings.hooks` on `session/new` and
`session/load`. Before this change, any session settings replaced
`CLAUDE_MODEL_CONFIG` entirely, so adding a single hook dropped the
deployment's `modelOverrides` / `availableModels`. The two are now
merged, and the session settings win per key.
The wrapper does not merge hooks itself: Claude Code already runs the
hooks of every settings tier, so user and project hooks keep running
next to the session ones. Hooks stay scoped to their session, and a
`session/load` with different settings recreates the query, which
replaces or removes them.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
#1289 made a v2 client get `cancelled` for a run that Claude Code
aborted, when Claude Code reports it as an error result with
`non_execution_kind`. Claude Code has a second way to report an aborted
command: a **successful** Bash result whose structured output says
`interrupted: true`. A v2 client got `completed` for that. With this PR
it gets `cancelled` too, so the rule is the same however Claude Code
reports the abort.
## When Claude Code sends that result
I read the CLI that SDK 0.3.293 bundles. I didn't reproduce these cases
live.
| What stops the command | What the adapter receives | v2 before | v2
after |
| --- | --- | --- | --- |
| The client cancels (`session/cancel`) | an error result,
`non_execution_kind: "interrupted"` | `cancelled` (#1289) | same |
| A timeout | an error, "Command timed out after …", **not**
`interrupted` (or the command is backgrounded) | `failed` | same |
| The output limit or a replaced output file | an error with `Exit code
137`, not `interrupted` | `failed` | same |
| A `now`-priority message such as `_session/steering`, landing just
before the command starts, or while the output limit kills it | a
successful result, `interrupted: true` | `completed` | **`cancelled`** |
A successful `interrupted` result needs the abort reason `interrupt`,
which a `now`-priority message causes. That abort doesn't kill a running
command, so this result only comes from the races in the last row.
Clients will rarely see it. The point of the change is that v2's status
follows what Claude Code reports, however it reports it.
v1 and AIR clients are unchanged: `completed` with no exit code, and AIR
still gets exit code 1.
## How
- `AcpToolCallRenderer.resultStatus` takes the command's `interrupted`
fact alongside `nonExecution`.
- `result()` used to call `resultFields`, which drops the command facts.
It now computes the facts once (`resultFacts`) and builds the fields
from them (`fieldsOfResult`). That lets it pass `interrupted` without
adding a field to `RenderedResult`, which the public
`toolUpdateFromToolResult` returns.
- The agent's checks for a finished tool call already count `cancelled`
(`isFinalToolCallStatus`, #1289).
## Checks
- `npm run check`, `npm run build` and all 2730 tests pass. No golden
file changes: no recorded scenario has an interrupted command.
- New tests:
- **renderer:** an interrupted command on v2, v1 and AIR, and one that
isn't interrupted on v2;
- **v2 surface:** a v2 client receives `cancelled`, and the turn still
ends `end_turn`.
- I made four mutations and each failed a test: the rule ignores
`interrupted`, every client gets `cancelled`, `result()` doesn't pass
the fact, and `result()` inverts it.
v2 has a `cancelled` tool call status ("the tool call was cancelled
before it completed"), which v1 doesn't. #1289 started using it for a
run that Claude Code aborted. This PR uses it for the other tool call
that never ran: one that Claude dropped before running it.
## What changes
When a turn ends with `end_turn` and a streamed `tool_use` never reached
a complete assistant message, Claude dropped that tool call before it
ran, for example when it switched to a steering message. The agent
closes it at the end of the turn with "Claude stopped this tool call
before it ran." The turn itself still succeeds.
| Case | v2 client | v1 and AIR clients |
| --- | --- | --- |
| Dropped before it ran | `cancelled` (was `failed`) | `failed`, as
before |
| Ran, but Claude Code returned no result | `failed`, as before, and the
turn fails with `incomplete_tool_call` | same |
The content text is unchanged in both cases.
## How
- **The renderer builds both closing reports**
(`AcpToolCallRenderer.unfinished`), and picks the status from
`ClientCapabilities.v2`, as `resultStatus` does since #1289. Before, the
agent built the report inline with a hardcoded `failed`.
- **The agent** passes whether the tool ran. Its closing step
(`failToolCall`, now `closeUnfinished`) already removes the call from
all of its tracking itself, so no "is this status final" check needed
changing.
## Checks
- `npm run check`, `npm run build` and all 2728 tests pass. No golden
file changes: no recorded scenario drops a tool call.
- New tests:
- **renderer:** dropped and ran-without-result, on v2, v1 and AIR;
- **v2 surface:** a v2 client receives `pending` then `cancelled` for a
dropped tool call, and the turn ends `end_turn`.
- The existing v1 tests in `incomplete-tools.test.ts` are unchanged and
still pass.
- I made five mutations and each failed a test: the renderer never
cancels, the renderer cancels a tool that ran, the agent marks a dropped
call as having run, the agent marks a no-result call as dropped, and the
agent's renderer ignores the client's capabilities.
A v2 diff can't hold the snippet of an Edit's input (it needs line
numbers and the operation), so on v2 an auto-approved Edit or Write
showed its change only once the PostToolUse hook reported it, after the
tool had already run. Only an asked one showed its approval patch first.
## What changes, v2 only
The tool call shows the exact patch before the tool runs, auto-approved
or not.
## How
- **A PreToolUse hook for Edit and Write** (`fileChangePreviewHook`),
registered only on v2 connections. Claude Code runs the tool only after
the hook returns, so the file is still unchanged when the hook reads it.
That's the same guarantee the approval patch in `canUseTool` relies on.
The hook sends the same patch (`previewPatchContent`):
- **Stream already showed the tool call:** a `tool_call_update` through
the session's stream router, pinned like an approval patch.
- **Hook came first:** the SDK dispatches hook callbacks as soon as it
reads them, ahead of the message queue the agent consumes. The hook then
emits the tool call with the patch via `ensureToolCallEmitted`, the
permission flow's fix for the same race (#851).
- **Subagent tools** are attributed exactly as in `canUseTool`. That
rule moves into `toolUseOwner`, which both use, with no behavior change.
- **Safe failure:** the hook makes no permission decision, and any
failure only leaves the preview out.
- **v1 and AIR** register no PreToolUse hook, so Claude Code waits on
nothing new there and their output is unchanged.
I first tried hanging the preview on the per-tool-use hook registry that
PostToolUse uses. That fails when the hook comes before the stream, so
the hook lives on the agent instead.
## Golden files
The scenario harness now runs PreToolUse before each tool, as Claude
Code does, and applies each hook's `matcher`. The v2 golden files of the
four file-change scenarios change:
- **`write-existing`** (auto-approved): the patch now arrives before the
tool completes, and the final hook report no longer repeats it, because
the tracker sees no change.
- **`write-new`, `edit-with-permission`, `edit-rejected`:** the tool
call gets the patch just before the permission request, which carries
the same patch.
No v1, AIR or plain golden file changes.
## Checks
- `npm run check`, `npm run build` and all 2497 tests pass.
- A new v2 test runs an auto-approved Edit with the hook both after and
before the streamed tool use. It checks that the patch is computed from
the file before the edit, arrives before the result, and isn't replaced.
- A new test checks that only a v2 session registers the hook, with the
`Edit|Write` matcher.
- Mutations that fail tests: no hook on v2, the hook on v1 too, the
hook-first path doing nothing, the already-shown path sending nothing,
and Edit only.
- Not pinned by any test: the pin itself. On v2 nothing later in the
stream carries content for an Edit or Write, so it's only there for
consistency with the approval patch.
## Follow-up
AIR has the same gap for an auto-approved Write: it shows no diff until
the hook. That's out of scope here, since it changes AIR's output.
Two findings of the 2026-10-10 night perf run on a 5,000-session home
(findings 8 and 9).
## Rename push (finding 9)
The run measured "no push within 10 s" after `_session/rename`. The
cause was the harness, not the adapter. The bench renames the newest
session to `"Night renamed"`, and an earlier bench run on the same home
had already given it that title. The transcript shows that pair of title
records twice. A rename to the current title appends nothing, so there
was nothing to push. On a fresh home, the same bench gets the push. The
hypotheses checked:
- The metadata cache is not updated by a rename. The appended records
change the transcript's size, and the watcher re-reads it.
- The sidecar lies outside the non-recursive watch, but so does every
rename. Each one also appends to the transcript, which is watched.
Still, the push depended on `fs.watch` plus its 150 ms quiet period. Now
a rename, archive, unarchive or delete through this connection publishes
at once. `ListSubscriptions.sessionWritten` stats the session's
transcripts and reads its row, the way a transcript event would, without
waiting. The event that follows finds the row unchanged and sends
nothing. Renames by other processes still arrive through the watcher.
The 1 s per-session interval of a subscription still applies.
## Listing every page (finding 8)
Profiling `SessionIndex.list` showed where a page's time goes. The full
enumeration and stat of 5,000 transcripts takes about 20 ms per page.
Most of the remaining ~380 ms was the SDK `getSessionInfo`, called once
per row read: its lookup runs a `readdir` of the whole project directory
(5,000 entries) on every call.
- A metadata read no longer calls the SDK. Titles come from the head and
tail the index already reads, by the same rule (`sdkTitles`). The tail
is searched as the SDK searches it, cut first line included.
- The pages after a cursor reuse the list's enumeration. It is keyed by
the cursor and kept for at most 30 s, at most 8 lists. It is dropped as
soon as a directory of the scope adds or removes an entry, through the
`DirListings` identity check. Such a page stats only the transcripts it
reads (each with its session's other copies) right before reading them.
A transcript that changed since either keeps its order key (no new
prompt) or moves up before the cursor, so the page is as fresh as one
from a new enumeration. The first page always enumerates.
## Measurements
Real adapter (`dist/index.js`), driven as AIR drives it by
`acp-perf-harness/air-ui/night/acp-adapter-bench.mjs`. Fixture: 5,000
sessions from `gen-night-data.mjs`.
| | before | after |
|---|---|---|
| Listing every page (25 × 200) | 10.1–16.3 s | 0.92–1.16 s |
| First page (51) | 156–472 ms | 46–62 ms |
| Show more (50) | 117–283 ms | 13–23 ms |
| Push after archive | ~170 ms | 3–4 ms |
| Push after a rename | ~170 ms | 3–5 ms |
## Tests
- A rename, archive, unarchive and delete each push within 500 ms while
the watcher's quiet period is 60 s (fails without the fix). A rename by
another process is pushed through the watcher.
- Paging:
- one enumeration for all pages;
- between pages, a transcript emptied, one with a new prompt, and one
with only a new answer give the same pages as a new enumeration;
- an older copy of a session that got a prompt hides it on later pages;
- adding or removing a transcript enumerates again.
- A custom title whose record starts before the tail window matches the
SDK.
- Read-count assertions use the new `SessionIndex.transcriptsRead`
counter instead of SDK call counts.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
## Summary
Adds the opt-in AIR `sessionIndex` extension. With it, an AIR client can
show the latest sessions of a project quickly, with their state, and can
rename, archive and unarchive them over ACP. The full contract is in
`docs/air-extensions.md` ("Session index").
The extension follows ACP RFDs. The transport differs: it uses
`_meta.jetbrains.air` request options and row fields, `_session/*`
methods, and AIR capabilities that are not advertised under ACP v2. The
`archived` list filter also differs (see below).
- **Session list extensions**
(agentclientprotocol/agent-client-protocol#2323):
- `limit`, ordered by last user activity (`lastPromptAt ?? updatedAt`),
and `includeWorktrees`.
- Row fields `lastPromptAt`, `model` and `forkedFrom`.
- `state`: `running`, `idle`, `requires_action`, and `error`, which the
RFD lacks.
- `lastTurnEndedAt`.
- `cost`: the SDK's `total_cost_usd` for a session that runs on this
connection only. No cost is read from transcripts.
- Live updates come from an AIR list subscription (below).
- **Session archive** (agentclientprotocol/agent-client-protocol#2161):
- `archived` is on every row, `session_info_update` is sent on a change,
and an unknown session is `-32002`.
- The `archived` list filter has three values: `"unarchived"` (the
default), `"archived"` (archived sessions only) and `"all"` (both, in
one order). #2161 has a boolean here. Its `false` is `"unarchived"`, its
`true` is `"all"`, and `"archived"` has no counterpart.
- **Capabilities**: an AIR client that declares `sessionIndex` gets
these in `_meta.jetbrains.air.capabilities`. The client declares only
`sessionIndex`.
- `sessionIndex`.
- `sessionArchive`: `_session/archive` and `_session/unarchive`. The RFD
capability is `archive` (#2161).
- `sessionRename`: `_session/rename`. The RFD has capability `setTitle`
and method `session/set_title`
(agentclientprotocol/agent-client-protocol#1987).
- `sessionListSubscribe`: `_session/list/subscribe`,
`_session/list/unsubscribe` and `_session/list/changes`. No RFD
counterpart.
### Clients without `sessionIndex`
Clients that don't declare `sessionIndex`, which means non-AIR clients
and released AIR builds, keep the current behaviour. They get the same
SDK `listSessions` path, page size, cursor and initialize capabilities,
with no watchers and no notifications. There are two deliberate
deviations, both strictly safer:
1. **`session/delete` from an AIR client without `sessionIndex`.**
Released AIR builds use delete as "Done". Instead of deleting the
transcript (data loss), the adapter archives the session in AIR's own
Claude format (below). Archived sessions are hidden from that client's
list, so "Done" looks the same and nothing is lost. An unknown session
keeps the SDK's error. Other clients get the SDK delete, as before.
2. **`session/close`** of a session that is not loaded here returns `{}`
instead of throwing.
### Sessions open in another process
`session/load`, `session/resume` and `session/prompt` work on a session
that another live Claude Code process has open, for every client, as the
Claude CLI does. Rename, archive, unarchive and delete also go ahead,
writing records or deleting transcripts as the CLI's `/rename` and
delete do. The other process keeps running.
### Archive format and rule
The archive state uses AIR's native Claude archive format
(`ClaudeStoreThreadBackend.appendTitleRecords`, ADR 0140), so AIR's
native path and the adapter read and write the same state.
- **Archive** appends `{"type":"custom-title","customTitle":"[archived]
<title>",…}` and `{"type":"agent-name","agentName":"[archived]
<title>",…}` to every transcript copy. **Unarchive** appends the same
pair without the prefix. Titles are cut to the CLI's 200 characters.
- **Archived is decided by the agent name first**, as in AIR's native
Claude provider. A session's name is its last top-level `agentName`,
else the custom title the SDK reports. The session is archived exactly
when that name starts with `[archived] `. The listed title comes from
the same source, shown without the prefix.
- Title records are metadata: `updatedAt` and the list order do not
move.
### Rename, archive and delete
- **Rename** writes the same title pair. An archived session keeps its
prefix. A session running here is renamed through its CLI's
`rename_session` control request, serialised with auto-titling. Other
sessions get the records plus the `custom-title.json` sidecar the CLI
writes. No generated title replaces a client title, but a title stored
later by someone else (a `/rename`) is still adopted.
- **Archiving stops the running session.** `_session/archive` of a
session loaded on this connection does four things:
1. It interrupts the running turn.
2. It retitles the session through its CLI. The adapter also appends the
matching `agent-name` record to the CLI's transcript, because the CLI
writes that record only later.
3. It closes the session as `session/close` does.
4. It archives the transcripts once more if the closed CLI left them
unarchived.
The client then gets `session_info_update` with `archived: true`.
Unarchive does not reopen the session. A session that is not loaded here
is archived by writing the title records.
- **Delete** for a `sessionIndex` client deletes every copy of the
session and its `<sessionId>/` directories. A session running here is
closed first.
### Implementation (`src/session-index/`)
- **Index**:
- Reads the project dirs with `readdir` + `stat`, and keeps a 2000-entry
metadata LRU keyed by (path, mtime, size).
- Cache misses are read in parallel through `getSessionInfo`, plus a
growing tail read (64 KB → 4 MB) for the last prompt, last message, turn
end and agent name.
- SDK semantics are kept: sidecar titles, `continued-in`, long-path
hashes, darwin case, and first-prompt extraction (ported, and
fuzz-compared with the SDK).
- The `cwd` scope follows the SDK `listSessions`. Worktrees expand to
the same relative subdirectory, and a session copied to several project
directories is listed from its newest copy.
- The keyset cursor is bound to `cwd`, `archived` and
`includeWorktrees`. Session ids match exactly.
- **State**:
- For sessions of this process, the SDK state.
- For other sessions, the Claude Code live registry
(`~/.claude/sessions/<pid>.json`, with pid + procStart liveness and
Claude Desktop's rules) or the transcript tail. The registry is read
only for the row state.
- `error` means the session is not running and its last turn ended with
an error, not a cancel.
Documented in `docs/air-extensions.md`, with an extension → RFD mapping
table and the remaining differences.
### Measured on a real `~/.claude` (233 transcripts, read-only)
| Case | New path | Old SDK path |
|---|---|---|
| cwd, limit 50, cold process | ~80 ms | 78–156 ms (all rows) |
| cwd, limit 50, warm | 1.3–4 ms | — |
## Session list subscription
Replaces polling the first page. It is only for a client that declared
`sessionIndex`; the agent advertises `sessionListSubscribe` with it,
never under ACP v2.
- **Subscribe**: `_session/list/subscribe { cwd }` returns `{
subscriptionId }`. `cwd` must be absolute, else `-32602`; other params
are ignored.
- The scope is `cwd` and the same subdirectory in every linked worktree,
in any archive state, without sidechains.
- **Changes**: `_session/list/changes { subscriptionId, sessions,
removed }`.
- `sessions` holds the full `session/list` row of each session that
appeared, or whose title, `lastPromptAt`, `state`, `lastTurnEndedAt`,
`cost`, `model`, `forkedFrom` or `archived` changed since the last row
sent.
- The first change of a session after subscribe is sent in full. After
that, a change of `updatedAt` alone sends nothing.
- `removed` lists sessions that were deleted or moved out of scope.
- Archive and unarchive are row changes.
- A session is sent at most once a second, with one notification per
subscription per pass.
- **Unsubscribe**: `_session/list/unsubscribe { subscriptionId }`
returns `{}` and is idempotent.
- A subscription lives until unsubscribe or until the connection closes.
- A connection has at most 128 subscriptions. The 129th is `-32602` with
`data.reason: "too_many_subscriptions"`.
- Subscriptions of the same `cwd` share one watch and are notified
independently.
- **Delivery** is best effort, with no resync and no sequence numbers. A
rescan every 10 s (and 1 s after a project directory watch opens) sends
whatever differs.
- **Implementation** (`list-subscriptions.ts`, `session-info.ts`):
- A non-recursive `fs.watch` on the scope's project dirs, the registry
and the projects root.
- A transcript event re-reads only that transcript, and a registry event
reads only that `<pid>.json`. Sessions running here push their SDK state
at once.
- Subscribe reads no session row. The rescan reads only transcripts
whose stat changed or whose read failed.
### Measured: one subscription on the 5,200-session project (Docker
`node:22`, 2 CPU, 2 GB, shared host)
300 s of churn: 20 sessions appending 10/s each (updatedAt-only),
registry status flips every 200 ms, and a session created every 2 s and
deleted 10 s later.
| | Old `list_changed` watcher | Subscription |
|---|---|---|
| Agent CPU p50 / max | 19% / — | 12.9% / 49% |
| Event loop p99 (p50 / max of 1 s windows) | — | 16 / 31 ms; worst
single delay 87 ms |
| Change latency p50 / p95 | 950 ms (hint) | create 291 / 570 ms, delete
279 / 506 ms; registry state 902 / 990 ms* |
| Notifications / min | — | 90 (896 rows, 0 rows for updatedAt-only
appends) |
| RSS | flat ~160 MB | 159 → 198 MB (heap flat ~50 MB) |
\* The registry flips the same 5 sessions every 200 ms, so each is held
to the once-a-second limit. Latency is measured from the first unsent
change.
These numbers were measured with an earlier subscribe that read every
row up front. Subscribe now reads no rows, so that one-off cost no
longer occurs. The lazy subscription has not been re-measured yet.
## Load test: 10,000 sessions (Docker, 2 CPU, 2 GB)
Calibrated data: 10k transcripts, 15 GB, 36k subagent files, and one
5,200-session project. Sizes match a real profile (p50 311K / p90 2.67M
/ p99 20.5M).
| Scenario (limit 50) | Before | After |
|---|---|---|
| Big project, first page cold / warm p50 | out of memory | 225 / 19 ms
|
| No cwd, cold / warm p50 | 1,722 / 178 ms | 209 / 45 ms |
| Page through 4,637 rows | 457 s | 11.4 s cold, 2.9 s warm |
| Delete p50 / 100 concurrent | 23.8 ms / 4.4 s | 7.8 ms / 0.8 s |
| 300 s of churn (60k changes) | out of memory after 3 s | list p50 54
ms, 0 stalls >50 ms, RSS flat ~160 MB |
## Streaming: keep the event loop responsive under a backlog
Under a backlog of buffered SDK messages, the adapter could freeze its
event loop for seconds. Every `query.next()` on a non-empty SDK queue
resolves in a microtask, so `runConsumer` forwarded the whole backlog
without reaching a macrotask boundary. Incoming JSON-RPC, including
`session/cancel`, waited until the backlog drained.
1. **Consumer yields to the event loop.** A shared `EventLoopYielder`
(`src/utils.ts`) gives the event loop a turn via `setImmediate` once the
current iteration has run for 8 ms. Order, content and cancel semantics
are unchanged.
2. **No per-message copy in `nodeToWebWritable`** for byte streams.
Object-mode streams keep the copy.
3. **Diff memo.** The approval preview and the PostToolUse patch no
longer diff the same texts twice. Timed-out diffs are not remembered.
4. **Prefix guards** in `parseMcpCommand` and `sanitizeTitle`. Both give
identical output.
5. **Replay yields between history messages**, with the same budget.
With 10 sessions × 1 MB, the max event-loop delay went from 4205 ms to
1626 ms, and ping p95 from 2793 ms to 262 ms (interleaved A/B, Docker
`node:22`, 2 CPU). Single-stream throughput is unchanged. Remaining
stalls are inside the Claude SDK and GC.
## Test plan
- [x] Rebased on `origin/main`. `npm run check`, `npm run build` and
`npm run test:run` pass.
- [x] Regression tests for the unchanged non-`sessionIndex` paths.
- [x] Regression tests for every review finding.
- [x] Reviews: Codex (gpt-6-astra) and a Claude review subagent, run as
independent passes against `origin/main` until a round found nothing of
normal or higher severity.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The v2 draft lets the `session/new`, `session/resume`, and
`session/fork` responses carry `availableCommands`
([agent-client-protocol#2259](https://github.com/agentclientprotocol/agent-client-protocol/pull/2259)),
so a client can show a session's commands without waiting for an update.
The v2 surface now fills it.
## Before and after, for a v2 client
- **Before:** the setup response, then an `available_commands_update`
with the list, from a `setTimeout` after the response.
- **Now:** the list is in the response itself, for `session/new`,
`session/resume` with and without replay, and `session/fork`. The field
is left out when the list is empty, as the draft asks.
- **No duplicate:** on a v2 connection the agent no longer sends that
post-setup update (`afterSetupResponse`). Later changes still arrive as
`available_commands_update`, for example the terminal-bound filtering
after Claude Code's first init frame, or `commands_changed`.
- v1 and AIR are unchanged.
## Cost
None. The commands come from `Query.supportedCommands()`, which in the
SDK is `this.latestCommands ?? (await this.initialization).commands`:
the cached initialization result that setup already awaited. So the
response doesn't wait any longer.
## Code
- `ClaudeAcpAgent.availableCommands(sessionId)` returns the session's
command list, factored out of `sendAvailableCommandsUpdate`.
- The three post-setup `setTimeout` blocks become one
`afterSetupResponse`, which skips the command update on v2.
- `setupCommands` in `src/v2/agent.ts` adds the list in v2 form. A
failure to read the commands is logged and leaves them out, since
they're optional and the session already exists.
## Title
`refactor:`, like the earlier v2 surface additions (#1253, #1255,
#1256), so no release note announces v2 yet. Retitle it if you'd rather.
## Checks
- `npm run check`, `npm run build` and all 2494 tests pass.
- The 40 v2 golden files each move the list from the post-setup
notification into the setup response, and nothing else changes; I
checked every diff with a script. No v1 or AIR golden file changes.
- New v2 tests cover each setup response (new, resume, resume with
replay, fork) and check that no post-setup update follows.
- I removed each part in turn, and each removal fails tests: the agent
still sending the update on v2, and the commands missing from new, from
resume, or from fork.
- Not covered: the empty-list case, because the adapter always adds its
`/mcp` command.
v2 has a `cancelled` tool call status ("the tool call was cancelled
before it completed"), which v1 doesn't. Until now a v2 client got
`failed` for a tool call the user interrupted, the same as a real
failure.
## What changes
Claude Code stamps a tool result that carries no tool output with
`tool_result_meta.non_execution_kind`. For a **v2 client**:
| Kind | Meaning (set in the bundled CLI) | Status |
| --- | --- | --- |
| `interrupted` | the turn was interrupted while the tool ran |
`cancelled` |
| `cancelled` | the call's own run was stopped (aborted, or moved to the
background) | `cancelled` |
| `user-rejected`, `permission-rule`, `automode-*` | the tool was
refused | `failed`, as before |
v1 and AIR clients are unchanged: `failed`, with the kind in
`_meta.claudeCode.nonExecutionKind`. v2 clients still get that `_meta`
too.
## How
- **The renderer decides the status**
(`AcpToolCallRenderer.resultStatus`), from `ClientCapabilities.v2`.
That's the same pattern the agent uses for v2 diffs: the value travels
as a v1 status (`V2_CANCELLED`, with a cast, since v1's `ToolCallStatus`
is closed), and the v2 surface passes it through. The v2 translation
still doesn't read `_meta`. The rule covers the regular result and the
two fallback reports in `toAcpNotifications`: an untracked tool call,
and a TodoWrite/Task tool call that only a permission request surfaced.
- **The agent's own "finished" checks** now use `isFinalToolCallStatus`,
which counts `cancelled`. Two places compared against
`completed`/`failed`: one removes a finished call from the turn's
foreground work, the other drops its eager-session and dispatched-call
entries. Without this, a cancelled call would have leaked those entries.
## Not covered
Replay doesn't have `tool_result_meta`, so a replayed interrupted call
stays `failed`, just as v1 replay has no `nonExecutionKind`.
## Checks
- `npm run check`, `npm run build` and all 2493 tests pass. No golden
file changes: no recorded scenario has an interrupted tool.
- New tests:
- **renderer:** each kind, for v2, v1 and AIR clients, plus the
permission-surfaced fallback;
- **agent:** a cancelled call is released from the dispatched-call
bookkeeping;
- **v2 surface:** a v2 client receives `cancelled`.
- I removed each part of the change in turn, and each removal fails a
test: never cancelled, cancelled for v1 too, refusals cancelled too, the
bookkeeping ignoring `cancelled`, and the fallback branches keeping
`failed`.
Follow-up to #1287 (SDK 1.8.0). A v2 turn that fails after its prompt
was taken in now ends with the standard `error` stop reason from
[agent-client-protocol#2281](https://github.com/agentclientprotocol/agent-client-protocol/pull/2281),
in place of the stand-ins we used while the SDK didn't have it.
## Before and after
Before, on the v2 surface only:
1. an error `notice`, titled with the failure;
2. `idle` with the custom stop reason `_error`, and the JSON-RPC error
in `_meta.claudeCode.error`.
Now, one update:
```json
{ "sessionUpdate": "state_update", "state": "idle", "stopReason": "error",
"error": { "code": -32603, "message": "Internal error: API Error: 529 Overloaded" } }
```
- `error` is the JSON-RPC error that v1 rejects the prompt with: same
code, message and data. A client can show `message` and handle `code` as
for an error response, so `-32000` (auth required) can start its sign-in
again, which `_error` couldn't.
- The notice is gone. The v2 draft's
[Failures](https://agentclientprotocol.com/protocol/v2/draft/prompt-lifecycle)
section reports a failure that ends the work through the stop reason,
and keeps notices for failures the agent recovers from.
- v1 and AIR are unchanged.
## Also
- `TurnEvents.failed` loses its `title` parameter. Only the v2 notice
read it, and v1's prompt already ignored it. Its pass-through in
`Turn.reject` and `failActive` goes too. AIR's session failures still
get the title, through their own path.
- The v2 scenario harness treats an `error` stop reason as a failed
turn, and reports its message.
## One visible difference
The old notice showed the failure title, for example `API Error: 529
Overloaded`. The error's message is v1's, `Internal error: API Error:
529 Overloaded`, which v1 clients already show. If we'd rather v2
clients see the shorter text, the alternative is to use the title as the
error's `message` and keep v1's code and data. That would make v2's
message differ from v1's.
## Checks
- `npm run check`, `npm run build` and all 2489 tests pass. No golden
file changes: no recorded scenario fails a turn after insertion.
- The two v2 failure tests pin the new update and the auth code. Putting
`_error` back fails both.
Bumps `@agentclientprotocol/sdk` from 1.7.0 to 1.8.0. The release is one
change: the protocol schema moves to v1.25.0 and v2.0.0-alpha.8.
## What changed in the SDK
Comparing the generated types of 1.7.0 and 1.8.0, the only type change
in v1 and v2 is the `error` stop reason from
[agent-client-protocol#2281](https://github.com/agentclientprotocol/agent-client-protocol/pull/2281):
`IdleStateUpdate` gains `ErrorStopReason & { stopReason: "error" }`, and
`ErrorStopReason` (an optional JSON-RPC `error`) is new. The v2 index no
longer exports `StopReason`; the adapter doesn't import it.
## The one code change
`idle()` in `src/v2/prompt.ts` built the v2 `state_update` for an ended
turn by spreading the turn's stop reason into a `SessionUpdate`. With
the larger `IdleStateUpdate` union, TypeScript can no longer match a
union of stop reasons against it (it falls through to the custom and
unknown members). The state is now typed as the members for the agent's
own stop reasons (`Extract<IdleStateUpdate, { stopReason: StopReason
}>`). A stop reason that v2 doesn't know is still a compile error, which
I checked with a throwaway probe. The output is unchanged.
## Not in this PR
The adapter doesn't use the new `error` stop reason yet. Two stand-ins
stay until a follow-up switches them, which changes behavior and golden
files:
- a failed v2 turn's `_error` stop reason with `_meta.claudeCode.error`,
and its error `notice` (`src/v2/prompt.ts`);
- a failed subagent's `_meta.claudeCode.error` in the RFD form (#1257,
not merged yet).
## Checks
- `npm run check`, `npm run build`, and all 2489 tests pass.
- The scenario suites validate every message against the schemas that
1.8.0 ships (`schema/schema.json`, `schema/v2/schema.unstable.json`),
loaded from the installed SDK. No golden file changes.
## What
ACP `logout` cleared `providerConfig` and the gateway credentials but
left live queries running. Provider and gateway routing is baked into
each query's env, so open sessions kept using the old route after
logout.
`logout` now recreates every live session through the same path as
`providers/disable` (`enqueueProviderUpdate`), but only when a provider
or gateway override was active. It waits for active turns, then resumes
each session under its id with native routing. This also runs when
`claude auth logout` fails, because the override is already cleared by
then.
A plain CLI-login logout does not touch live sessions: the running CLI
picks up the logout by itself.
## Behavior change
With an override active, `logout` now waits for running turns before it
returns, like `providers/disable`. Under `--hide-claude-auth`, a session
that cannot be recreated signed out is dropped, as with
`providers/disable`.
2026-10-08 17:50:23 +04:00
196 changed files with 40639 additions and 2069 deletions
* bump body-parser from 2.3.0 to 2.4.0 ([#1436](https://github.com/agentclientprotocol/claude-agent-acp/issues/1436)) ([c26e640](https://github.com/agentclientprotocol/claude-agent-acp/commit/c26e640915739dc7a3cd0664f8f5879098e0fd83))
* distinguish model options with duplicate labels ([#1286](https://github.com/agentclientprotocol/claude-agent-acp/issues/1286)) ([434be13](https://github.com/agentclientprotocol/claude-agent-acp/commit/434be13a33141af8655c6f7c30f574841bf2279c))
* keep the usage-limit error when it arrives after compaction ([#1377](https://github.com/agentclientprotocol/claude-agent-acp/issues/1377)) ([2a1525e](https://github.com/agentclientprotocol/claude-agent-acp/commit/2a1525e57cd89246d1a50993fd6ba335c4e634ca))
* pass --settings before the auth status subcommand ([#1392](https://github.com/agentclientprotocol/claude-agent-acp/issues/1392)) ([6a33ded](https://github.com/agentclientprotocol/claude-agent-acp/commit/6a33dedcbb90e7bf9db91207f0edbf19ca6d705e))
* preserve foreground fork reports until launch completes ([#1431](https://github.com/agentclientprotocol/claude-agent-acp/issues/1431)) ([e369479](https://github.com/agentclientprotocol/claude-agent-acp/commit/e369479f93b34f84a11103323d097c44df42e02e))
* settle advisor tool results before completing turns ([#1247](https://github.com/agentclientprotocol/claude-agent-acp/issues/1247)) ([bed795d](https://github.com/agentclientprotocol/claude-agent-acp/commit/bed795d261620e6d5113e427a7196d94e66e7034))
* settle live steers folded into autonomous cycles ([#1185](https://github.com/agentclientprotocol/claude-agent-acp/issues/1185)) ([a4957d1](https://github.com/agentclientprotocol/claude-agent-acp/commit/a4957d17c1e1a925ba3b72b29c5dcde4faabbe17))
* report SendMessage delegations as linked session messages ([#1424](https://github.com/agentclientprotocol/claude-agent-acp/issues/1424)) ([739dde3](https://github.com/agentclientprotocol/claude-agent-acp/commit/739dde3ae5bb848bdb90e2c9150e2cc4687d480c))
* report the model of each native subagent ([#1432](https://github.com/agentclientprotocol/claude-agent-acp/issues/1432)) ([c319e5e](https://github.com/agentclientprotocol/claude-agent-acp/commit/c319e5e542aabe353bb2c5e177e4c5853392b8c4))
### Bug Fixes
* do not hold an AIR load replay until the CLI starts ([#1433](https://github.com/agentclientprotocol/claude-agent-acp/issues/1433)) ([eb9d63e](https://github.com/agentclientprotocol/claude-agent-acp/commit/eb9d63e5fde9b8fd8fe692dfb3280faba6626a42))
* refine RFD child models after a load, and retry a failed model update ([#1434](https://github.com/agentclientprotocol/claude-agent-acp/issues/1434)) ([9a8bf71](https://github.com/agentclientprotocol/claude-agent-acp/commit/9a8bf71d454fa85d03f55d4101a77e3ea7a149d0))
* send subagents' current state after a load response ([#1423](https://github.com/agentclientprotocol/claude-agent-acp/issues/1423)) ([17a967b](https://github.com/agentclientprotocol/claude-agent-acp/commit/17a967b4dab78bbb9cf9fedae60e6821578dc5cb))
* update to Claude Code 2.1.310 ([#1435](https://github.com/agentclientprotocol/claude-agent-acp/issues/1435)) ([2f3c6bb](https://github.com/agentclientprotocol/claude-agent-acp/commit/2f3c6bb7b3451a00cd77d7bb31c09e690ca220b3))
* end a turn at its result for AIR clients with backgroundSubagents ([#1262](https://github.com/agentclientprotocol/claude-agent-acp/issues/1262)) ([9b3a5c8](https://github.com/agentclientprotocol/claude-agent-acp/commit/9b3a5c891c75e78b985adb31f4e4b59a16ad2ebc))
* show messages typed in other Remote Control clients ([#1371](https://github.com/agentclientprotocol/claude-agent-acp/issues/1371)) ([5b11f47](https://github.com/agentclientprotocol/claude-agent-acp/commit/5b11f470b1c05b114c876b3b6e5b4df9441b1087))
* update to Claude Code 2.1.309 ([#1413](https://github.com/agentclientprotocol/claude-agent-acp/issues/1413)) ([a1521b6](https://github.com/agentclientprotocol/claude-agent-acp/commit/a1521b6196c58dbc5065f9c19fc9694273d3d435))
### Bug Fixes
* bump fast-uri from 3.1.8 to 3.1.9 ([#1410](https://github.com/agentclientprotocol/claude-agent-acp/issues/1410)) ([0fe22ae](https://github.com/agentclientprotocol/claude-agent-acp/commit/0fe22ae5a172b228a574665bb7136b900746041d))
* bump postcss from 8.5.30 to 8.5.31 in the minor group ([#1403](https://github.com/agentclientprotocol/claude-agent-acp/issues/1403)) ([ecaa2c9](https://github.com/agentclientprotocol/claude-agent-acp/commit/ecaa2c935b9f2b63c1846ca17c6c3398390fb0ef))
* bump the minor group across 1 directory with 2 updates ([#1416](https://github.com/agentclientprotocol/claude-agent-acp/issues/1416)) ([f7d6030](https://github.com/agentclientprotocol/claude-agent-acp/commit/f7d6030c04af23171058772480d55f6d2aee5298))
* IJAI-3744 keep a session running while its background tasks are open ([#1399](https://github.com/agentclientprotocol/claude-agent-acp/issues/1399)) ([e9f986b](https://github.com/agentclientprotocol/claude-agent-acp/commit/e9f986b8a941f5c1789078a39e474f247bd0db60))
* publish the session title as soon as the CLI has it ([#1406](https://github.com/agentclientprotocol/claude-agent-acp/issues/1406)) ([50cd76e](https://github.com/agentclientprotocol/claude-agent-acp/commit/50cd76e78dd9bb1ab0e4850a8d95431175ab5947))
* publish turns that Claude Code starts after end_turn as an async task in v1 ([#1390](https://github.com/agentclientprotocol/claude-agent-acp/issues/1390)) ([a1d0eee](https://github.com/agentclientprotocol/claude-agent-acp/commit/a1d0eeeaad3d67a0765f4b89e3d81c1af6ca0dbb))
* send one end event after the session/load history replay for AIR ([#1361](https://github.com/agentclientprotocol/claude-agent-acp/issues/1361)) ([1420994](https://github.com/agentclientprotocol/claude-agent-acp/commit/1420994ced20919aad127a8bd0294de022449e35))
### Bug Fixes
* match OpenRouter model ids in the gateway model listing ([#1365](https://github.com/agentclientprotocol/claude-agent-acp/issues/1365)) ([bcf74c2](https://github.com/agentclientprotocol/claude-agent-acp/commit/bcf74c2fe8e32bd24714d45122529dcf2f99a279))
* resolve a skill's SKILL.md by its declared name, not by its directory name ([#1372](https://github.com/agentclientprotocol/claude-agent-acp/issues/1372)) ([424db87](https://github.com/agentclientprotocol/claude-agent-acp/commit/424db8753581bfaf4c5bf278f8df8c089eec35da))
* update to ACP SDK 2.0.0 ([#1386](https://github.com/agentclientprotocol/claude-agent-acp/issues/1386)) ([ff01e06](https://github.com/agentclientprotocol/claude-agent-acp/commit/ff01e06579225e00643914692994cd60da4d6225))
* update to Claude Code 2.1.303 ([#1384](https://github.com/agentclientprotocol/claude-agent-acp/issues/1384)) ([2dab922](https://github.com/agentclientprotocol/claude-agent-acp/commit/2dab92264414d133fd6774f7a90241ea5192ba32))
* add /remote-control command to start Remote Control for a session ([#1197](https://github.com/agentclientprotocol/claude-agent-acp/issues/1197)) ([db9f50f](https://github.com/agentclientprotocol/claude-agent-acp/commit/db9f50f02145d088c0f6080672969a0673ba6359))
### Bug Fixes
* hold a fork back from the session list until its session/fork response is out ([#1368](https://github.com/agentclientprotocol/claude-agent-acp/issues/1368)) ([f5967fd](https://github.com/agentclientprotocol/claude-agent-acp/commit/f5967fd6b49ce4821cc829c26902ccf46f671992))
* add the MCP server and tool to AIR tool calls ([#1359](https://github.com/agentclientprotocol/claude-agent-acp/issues/1359)) ([872e93f](https://github.com/agentclientprotocol/claude-agent-acp/commit/872e93f11fde8abc528822d29cebcc542b05e9e8))
* publish the predicted follow-up prompt as _meta.promptSuggestions ([#1356](https://github.com/agentclientprotocol/claude-agent-acp/issues/1356)) ([78a29f5](https://github.com/agentclientprotocol/claude-agent-acp/commit/78a29f58ba1eb1b54896d8d73f49402ee50aa087))
* update ACP SDK to 1.9.0 and adopt the v2 spec clarifications ([#1366](https://github.com/agentclientprotocol/claude-agent-acp/issues/1366)) ([68bf74f](https://github.com/agentclientprotocol/claude-agent-acp/commit/68bf74f58ee378f21502ac93c44878b712905af2))
### Bug Fixes
* include subagent file edits in the file-change report ([#1357](https://github.com/agentclientprotocol/claude-agent-acp/issues/1357)) ([910d83c](https://github.com/agentclientprotocol/claude-agent-acp/commit/910d83ceea78a03b39002cf2dcc275442838e2db))
* restore resumed subagents after an adapter restart ([#1364](https://github.com/agentclientprotocol/claude-agent-acp/issues/1364)) ([26f144a](https://github.com/agentclientprotocol/claude-agent-acp/commit/26f144a2a5c60452805d11c87433963318ef4e65))
* keep background subagents running after a parent cancel, for clients that can cancel them ([#1348](https://github.com/agentclientprotocol/claude-agent-acp/issues/1348)) ([ba3c7be](https://github.com/agentclientprotocol/claude-agent-acp/commit/ba3c7be05e9af297fe95b0ac647da2340dd9e15b))
* let a client cancel one subagent with session/cancel on its child session ([#1347](https://github.com/agentclientprotocol/claude-agent-acp/issues/1347)) ([aeb69e7](https://github.com/agentclientprotocol/claude-agent-acp/commit/aeb69e7ed1170e8bce236378432ef8b83cdf2554))
* mark session list rows of worktrees Claude Code made (agentWorktree) ([#1352](https://github.com/agentclientprotocol/claude-agent-acp/issues/1352)) ([1a1f1a0](https://github.com/agentclientprotocol/claude-agent-acp/commit/1a1f1a0e802cc2ee097d9c78c1f7bafccef7c3df))
* narrow models to what the providers/set gateway lists ([#1340](https://github.com/agentclientprotocol/claude-agent-acp/issues/1340)) ([e8eb9d3](https://github.com/agentclientprotocol/claude-agent-acp/commit/e8eb9d340fd4f6dfd9826cf58461edf5ee165f44))
* restore a subagent from before a reload when SendMessage resumes it, for subagents RFD clients ([#1332](https://github.com/agentclientprotocol/claude-agent-acp/issues/1332)) ([df21b3f](https://github.com/agentclientprotocol/claude-agent-acp/commit/df21b3fb56c3449b6f86c9c9df558be351815ed3))
### Bug Fixes
* close the tool calls of a background subagent that the SDK reports stopped after a cancel ([#1336](https://github.com/agentclientprotocol/claude-agent-acp/issues/1336)) ([9a1b90f](https://github.com/agentclientprotocol/claude-agent-acp/commit/9a1b90fb9db8b04ef6756cbcdc8df22afc82a2ba))
* close the tool calls of a cycle that Claude Code started and a cancel stopped ([#1339](https://github.com/agentclientprotocol/claude-agent-acp/issues/1339)) ([1fd217f](https://github.com/agentclientprotocol/claude-agent-acp/commit/1fd217f3e77d0b7883ebd220bc19c7899d3af77f))
* close the tool calls that a cycle Claude Code started abandoned, at its end ([#1344](https://github.com/agentclientprotocol/claude-agent-acp/issues/1344)) ([594aa8c](https://github.com/agentclientprotocol/claude-agent-acp/commit/594aa8c9556609c16946c889e9c8f1f76337b203))
* deliver the output of a background subagent that a cancel did not stop ([#1345](https://github.com/agentclientprotocol/claude-agent-acp/issues/1345)) ([bcc024d](https://github.com/agentclientprotocol/claude-agent-acp/commit/bcc024d2c9a34d62e19999bc6cfc393ad56fbcde))
* end the terminal of a command whose tool call is closed without a result ([#1335](https://github.com/agentclientprotocol/claude-agent-acp/issues/1335)) ([764f339](https://github.com/agentclientprotocol/claude-agent-acp/commit/764f339c3e83eac8ca34f4ddc8ed65f8199b651d))
* end the tool calls of a cycle that Claude Code started and a cancel stopped, on v1 ([#1342](https://github.com/agentclientprotocol/claude-agent-acp/issues/1342)) ([b4788d6](https://github.com/agentclientprotocol/claude-agent-acp/commit/b4788d61eaf9372b376d56c0f6fb7c6156822ae6))
* keep a live session that was never prompted when a resume or load changes its settings ([#1353](https://github.com/agentclientprotocol/claude-agent-acp/issues/1353)) ([0c8de13](https://github.com/agentclientprotocol/claude-agent-acp/commit/0c8de1380fd990291fc51cf17c6742402efb5c94))
* let session/delete succeed for a session without a transcript ([#1351](https://github.com/agentclientprotocol/claude-agent-acp/issues/1351)) ([fadbe18](https://github.com/agentclientprotocol/claude-agent-acp/commit/fadbe1881cd441609a1fde8c43286d9a404dc425))
* report no running for the session's own request that a cancel withdraws, on ACP v2 ([#1346](https://github.com/agentclientprotocol/claude-agent-acp/issues/1346)) ([d528647](https://github.com/agentclientprotocol/claude-agent-acp/commit/d528647162ba6747654125cf6ebc2297ced02ed0))
* show nothing of a tool that cancelled work asks to run after the cancel was reported ([#1334](https://github.com/agentclientprotocol/claude-agent-acp/issues/1334)) ([ebf8b49](https://github.com/agentclientprotocol/claude-agent-acp/commit/ebf8b49fd68924f2c50680e7e73241f625801980))
* stop waiting for a question the client leaves open after Claude Code cancels it ([#1338](https://github.com/agentclientprotocol/claude-agent-acp/issues/1338)) ([c1e83b4](https://github.com/agentclientprotocol/claude-agent-acp/commit/c1e83b46b717230a5d623c3ac591d915a776e0ae))
* update Claude Agent SDK to 0.3.300 ([#1355](https://github.com/agentclientprotocol/claude-agent-acp/issues/1355)) ([761b4c8](https://github.com/agentclientprotocol/claude-agent-acp/commit/761b4c835985ff265d35338df35eee6e6861d8f3))
* accept IDE session hooks without dropping model settings ([#1265](https://github.com/agentclientprotocol/claude-agent-acp/issues/1265)) ([fe8b69e](https://github.com/agentclientprotocol/claude-agent-acp/commit/fe8b69edd438ee1bc4206752b029dd45e71975fe))
* **deps:** Bump actions/setup-node from 7.0.0 to 7.1.0 ([#1329](https://github.com/agentclientprotocol/claude-agent-acp/issues/1329)) ([c6510c2](https://github.com/agentclientprotocol/claude-agent-acp/commit/c6510c27c11bb59ad10090c8c18ba60c0fa1c3fa))
* keep a subagent's session across SendMessage resumes for subagents RFD clients ([#1321](https://github.com/agentclientprotocol/claude-agent-acp/issues/1321)) ([bd06804](https://github.com/agentclientprotocol/claude-agent-acp/commit/bd06804b67d7b4efa8180db2f36203a5d34c3ac4))
* replay each subagent under its live session id for subagents RFD clients ([#1328](https://github.com/agentclientprotocol/claude-agent-acp/issues/1328)) ([21eef57](https://github.com/agentclientprotocol/claude-agent-acp/commit/21eef576557c845bfe9acc66499dab347f813a98))
* report a subagent as requires_action while its request is open for subagents RFD clients ([#1322](https://github.com/agentclientprotocol/claude-agent-acp/issues/1322)) ([252126f](https://github.com/agentclientprotocol/claude-agent-acp/commit/252126f61654cf7ac2cad74be53b4c6add569e1f))
* report subagents as the subagents RFD defines, for clients that are not AIR ([#1320](https://github.com/agentclientprotocol/claude-agent-acp/issues/1320)) ([5758ac8](https://github.com/agentclientprotocol/claude-agent-acp/commit/5758ac84a4a3b95ace7542a7e71fd58d93a581b3))
### Bug Fixes
* close the open tool calls of a held or settling turn that a cancel ends ([#1221](https://github.com/agentclientprotocol/claude-agent-acp/issues/1221)) ([32c23db](https://github.com/agentclientprotocol/claude-agent-acp/commit/32c23db06d53d7d4e1295d78fc0129f8278d75df))
* display active Central helpers as JetBrains Air Gateway ([#1266](https://github.com/agentclientprotocol/claude-agent-acp/issues/1266)) ([d6c3717](https://github.com/agentclientprotocol/claude-agent-acp/commit/d6c371704fb5fd74c3b329a3d756486975e3f180))
* drop streamed output of prompts a cancel abandoned ([#1313](https://github.com/agentclientprotocol/claude-agent-acp/issues/1313)) ([1137df3](https://github.com/agentclientprotocol/claude-agent-acp/commit/1137df33aa4fe387916596ff489c02ee48ccbba3))
* end a cancelled turn at its interrupted result and deliver Claude Code's follow-up after a cancel ([#1309](https://github.com/agentclientprotocol/claude-agent-acp/issues/1309)) ([b007ac7](https://github.com/agentclientprotocol/claude-agent-acp/commit/b007ac7c45b85755877fee802c2c901a0e3057c6))
* end the tool calls of a cancelled turn before it reports the cancel ([#1327](https://github.com/agentclientprotocol/claude-agent-acp/issues/1327)) ([53df1c7](https://github.com/agentclientprotocol/claude-agent-acp/commit/53df1c7b22bf08f9a2866389be812be80f34c8a3))
* keep the terminal of a command in the background running until its task ends ([#1312](https://github.com/agentclientprotocol/claude-agent-acp/issues/1312)) ([d074558](https://github.com/agentclientprotocol/claude-agent-acp/commit/d074558e4a2ef4ee6f4b39aecb5ebf36d8c0f84b))
* report a command whose result says interrupted as cancelled on the experimental ACP v2 surface ([#1301](https://github.com/agentclientprotocol/claude-agent-acp/issues/1301)) ([b3bed2f](https://github.com/agentclientprotocol/claude-agent-acp/commit/b3bed2f7630f4ddb97978246255ba89ca6e4613e))
* route a subagent's PostToolUse hook update to its child session ([#1324](https://github.com/agentclientprotocol/claude-agent-acp/issues/1324)) ([4615a91](https://github.com/agentclientprotocol/claude-agent-acp/commit/4615a9141c12e8cd9093a5bbc0e62a7d778cf0cf))
* start a forked session so the client can prompt it at once ([#1317](https://github.com/agentclientprotocol/claude-agent-acp/issues/1317)) ([383bc7d](https://github.com/agentclientprotocol/claude-agent-acp/commit/383bc7dcf0d4d624d2d74405eb3cee6453eb9b11))
* push renamed sessions to list subscribers and reuse one listing across pages ([#1293](https://github.com/agentclientprotocol/claude-agent-acp/issues/1293)) ([92abb8f](https://github.com/agentclientprotocol/claude-agent-acp/commit/92abb8fd4db862c465c4b3a49ea32dac0720de2c))
* add the AIR sessionIndex extension for fast session lists ([#1268](https://github.com/agentclientprotocol/claude-agent-acp/issues/1268)) ([03d84f6](https://github.com/agentclientprotocol/claude-agent-acp/commit/03d84f6663a2f561b3c59bc30e622e085b869024))
* **deps:** Bump @agentclientprotocol/sdk to 1.8.0 ([#1287](https://github.com/agentclientprotocol/claude-agent-acp/issues/1287)) ([446a721](https://github.com/agentclientprotocol/claude-agent-acp/commit/446a7217fa2654a9bcfaff9ddbfcdf2917cef024))
* Support custom instructions for agent sessions via meta ([#1177](https://github.com/agentclientprotocol/claude-agent-acp/issues/1177)) ([908c994](https://github.com/agentclientprotocol/claude-agent-acp/commit/908c994901b857918c23655670468298f6bbd33b))
### Bug Fixes
* recreate live sessions on logout when it clears a provider or gateway override ([#1278](https://github.com/agentclientprotocol/claude-agent-acp/issues/1278)) ([966be7a](https://github.com/agentclientprotocol/claude-agent-acp/commit/966be7abe60435f2f1c6379a5255ea7d533a1a20))
* report a failed turn with the error stop reason on the experimental ACP v2 surface ([#1288](https://github.com/agentclientprotocol/claude-agent-acp/issues/1288)) ([060bdb2](https://github.com/agentclientprotocol/claude-agent-acp/commit/060bdb212a9354f2dd0c88e4234a7659aeb6d27e))
* report an interrupted tool call as cancelled on the experimental ACP v2 surface ([#1289](https://github.com/agentclientprotocol/claude-agent-acp/issues/1289)) ([55c3106](https://github.com/agentclientprotocol/claude-agent-acp/commit/55c3106c60f58909af76f75df9f6c5815dcf0021))
- An Ultracode session config option, which turns on Claude Code's dynamic workflows for every task. It appears when dynamic workflows are enabled and the model supports ultracode (any model with `xhigh` effort)
-`/mcp` in the chat: the MCP server status as a list. The adapter runs `/mcp reconnect`, `/mcp enable`, and `/mcp disable` through the SDK control API, because Claude Code refuses them in SDK mode. A reconnect of an ACP server that needs authentication starts MCP OAuth through URL elicitation
- Session-scoped long-running goals for AIR through the [goal extension](docs/air-extensions.md#goal) under `_meta.jetbrains.air.goal`
- Structured errors, recovery, and warnings through the opt-in [session failure extension](docs/air-extensions.md#session-failure)
Subagents are exposed only after bilateral capability negotiation. Until the released ACP SDKs
preserve the draft `clientCapabilities.subagents` field, a supporting client may advertise
`nativeSubagentSessions` in `_meta.jetbrains.air.capabilities`; the adapter mirrors the capability
in its initialize response. The canonical field remains supported and takes precedence once it is
available. Without either client signal, Agent/Task lifecycle keeps its legacy ordinary ACP
tool-call representation and child interactions stay on the root session. Clients that use the
historical `_meta["subagent-transcript"]` capability or `forwardSubagentText` session option retain
the flattened child transcript behavior. See [AIR extensions](docs/air-extensions.md#native-subagent-sessions).
A client that declares `clientCapabilities.subagents`, other than JetBrains AIR, gets each Agent or
Task subagent as its own child session, following the [subagents RFD](https://github.com/agentclientprotocol/agent-client-protocol/blob/main/docs/rfds/subagents.mdx):
-`subagent_update` on the parent announces the child before any of its traffic, with the
parent's `title` and `description` for it, and reports its work state: `running`,
`requires_action` while one of its requests is open (and `running` again when the last one ends,
unless a cancel withdrew it: the child is stopping then), and `idle` when its work ends, with
`end_turn` or `cancelled` when the SDK gives the reason. A failure is `idle` with the `error`
stop reason and the SDK's error text as its `error`. The child keeps its session for every
delegation to it.
- Session messages replace the Agent or Task call that launches the child, which its parent is
not shown:
- The launch's prompt is a `session_message` in both transcripts: the parent's outgoing view and
the child's incoming one. Both use the launch's tool use id, and each names the other with the
draft RFD's `recipientMessageId` and `senderMessageId`.
- A foreground child's answer, from the launch's result, is the child's `session_message` to
the parent. In Claude Code's hand-back mode, the child's `SubagentHandback` call is its
message to the parent instead, in both transcripts and linked the same way.
- A launch whose child is never exposed is shown as a tool call after all, with its final
status.
- The message of a SendMessage call that resumes the child is a `session_message` in the child's
transcript. The SendMessage call stays a tool call of the session that made it.
-`session/cancel` on the parent interrupts Claude Code, which stops the foreground children that
the turn waits on. Background children keep running, as the RFD prefers; a client stops one with
its own `cancel`. Each stopped child reports `idle` with `cancelled` from Claude Code's own
events, and its open requests are withdrawn. The adapter ends no child at a cancel itself, so a
child that keeps running keeps its open requests and its open tool calls. To spare background
children, the adapter declares the SDK option `perTaskStopAffordance`, which a client can turn
off in `_meta.claudeCode.options`. That option spares background workflows too, which a client
cannot stop, so the adapter stops them after the interrupt, as Claude Code did without it.
Background commands keep running after a cancel either way. A tool call of a stopped child that Claude Code reports no
result for, such as the command it was running, ends in the child's session before the cancelled
prompt resolves. When Claude Code stops a background child after that, or while no prompt runs,
the tool call ends right after the child reports `idle`. A child that still runs when Claude Code
exits is `idle` with no stop reason.
- A child whose parent is not yet known when it ends is not exposed, since the RFD forbids
guessing its parent.
- A replay restores each child under its live session id, from its own transcript, with the same
session messages as live, and its end is an `idle` before the response.
A launch without Claude Code's metadata file for the child stays an ordinary tool call of the
parent, and a notice, for a client that takes notices, says that subagent history is missing.
- After a load or resume, with or without replay, a SendMessage that resumes an agent from before
it runs that agent in its session from before. Before the agent's traffic, each of its ancestors
that the client was not told about in this connection is announced, parent before child and
with no work state, as the RFD requires. An agent whose launch the session's history does not
record stays unexposed.
- Each running child is announced with the `cancel` capability. `session/cancel` with the child's
session id stops that child's current work, through the SDK's `Query.stopTask`, and not its
parent's: Claude Code also stops the foreground children it waits on, and the parent's turn goes
on. Each stopped child reports `idle` with `cancelled` from Claude Code's own events, and its
requests that the stop withdraws report no `running` first. A replayed child, which no longer
runs, gets no capabilities. A client cannot prompt or otherwise change a child.
An [ACP v2](#experimental-acp-v2) client gets the same without declaring anything, since subagents
are part of v2's baseline. Each child also reports its work state as its own `state_update`, right
after the parent's copy.
JetBrains AIR keeps the earlier draft of the RFD (`subagent_spawned`, `subagent_state_update`),
which it enables with `nativeSubagentSessions` in `_meta.jetbrains.air.capabilities`. See
@@ -121,7 +126,8 @@ The `initialize` response of an AIR client carries the agent side of the extensi
"asyncTasks",
"recommendedValue",
"diffPatch",
"planFile"
"planFile",
"backgroundSubagents"
],
"goal":{
"version":1,
@@ -135,22 +141,29 @@ The `initialize` response of an AIR client carries the agent side of the extensi
}
```
The agent list does not depend on the capabilities that AIR declares.
An extension is active only when the client declared its capability.
The agent list does not depend on the capabilities that AIR declares, except `sessionIndex`: the agent lists it, together with `sessionArchive`, `sessionRename`, `sessionListSubscribe` and `sessionWorktrees`, only for a client that declared `sessionIndex`.
An extension is active only when the client declared its capability. The client does not declare `sessionArchive`, `sessionRename`, `sessionListSubscribe` and `sessionWorktrees`.
The response to a client that is not AIR has no `_meta.jetbrains` key.
### Capabilities
| Capability | Advertised | What the adapter does when the client declares it | Section |
| `diffPatch` | yes | Sends an exact Git patch in the diff block of an Edit or a Write. | [Diff patch](#diff-patch) |
| `sessionFailure` | yes | Sends warnings and errors as typed transcript records. | [Session failure](#session-failure) |
| `recommendedValue` | yes | Replaces the `default` model and effort rows with concrete values and a recommendation. | [Recommended config values](#recommended-config-values) |
| `asyncTasks` | yes | Publishes background work that is not a subagent as async tasks. | [Async tasks](#async-tasks) |
| `agentFileChangeReport` | yes | Accepts a report request on `session/prompt` and sends the changed file list. | [Agent file-change report](#agent-file-change-report) |
| `nativeSubagentSessions` | yes | Reports an Agent or Task subagent as a native ACP child session. | [Native subagent sessions](#native-subagent-sessions) |
| `planFile` | yes | Sends the path of the plan file in place of the plan text of an ExitPlanMode. | [Plan file](#plan-file) |
| `rawInputRendering` | no | Sends no display copy of readable input in `content`. The client renders `rawInput`. | [Tool call contract](#tool-call-contract) |
| Capability | Advertised | What the adapter does when the client declares it | Section |
| `diffPatch` | yes | Sends an exact Git patch in the diff block of an Edit or a Write. | [Diff patch](#diff-patch) |
| `sessionFailure` | yes | Sends warnings and errors as typed transcript records. | [Session failure](#session-failure) |
| `recommendedValue` | yes | Replaces the `default` model and effort rows with concrete values and a recommendation. | [Recommended config values](#recommended-config-values) |
| `asyncTasks` | yes | Publishes background work that is not a subagent as async tasks. | [Async tasks](#async-tasks) |
| `agentFileChangeReport` | yes | Accepts a report request on `session/prompt` and sends the changed file list. | [Agent file-change report](#agent-file-change-report) |
| `nativeSubagentSessions` | yes | Reports an Agent or Task subagent as a native ACP child session. | [Native subagent sessions](#native-subagent-sessions) |
| `planFile` | yes | Sends the path of the plan file in place of the plan text of an ExitPlanMode. | [Plan file](#plan-file) |
| `backgroundSubagents` | yes | Ends a prompt turn at its result while background subagents still run. | [Background subagents](#background-subagents) |
| `sessionIndex` | on request | Pages, orders and annotates `session/list`; adds rename, archive and a list subscription. | [Session index](#session-index) |
| `sessionArchive` | with `sessionIndex` | Nothing on its own: the agent lists it to tell that it supports `_session/archive` and `_session/unarchive`. | [Archive](#archive) |
| `sessionRename` | with `sessionIndex` | Nothing on its own: the agent lists it to tell that it supports `_session/rename`. | [Rename](#rename) |
| `sessionListSubscribe` | with `sessionIndex` | Nothing on its own: the agent lists it to tell that it supports `_session/list/subscribe`. | [List subscription](#list-subscription) |
| `sessionWorktrees` | with `sessionIndex` | Nothing on its own: the agent lists it to tell that rows carry `agentWorktree` for a worktree Claude Code made. | [List response](#list-response) |
| `loadReplayEnd` | no | Sends one `session_info_update` after the whole history replay of a loaded session. | [Load replay end](#load-replay-end) |
| `rawInputRendering` | no | Sends no display copy of readable input in `content`. The client renders `rawInput`. | [Tool call contract](#tool-call-contract) |
The adapter ignores `planContentDelta`.
Claude does not stream a plan, so the adapter never sends `contentDelta` (see [Plan file](#plan-file)).
@@ -179,11 +192,13 @@ The adapter sends these keys only to an AIR client. "AIR" in the Gate column mea
| `commandTitle` | Bash and PowerShell tool call `_meta.jetbrains.air` | the `description` input string | AIR |
| `subagent` | Agent and Task tool call `_meta.jetbrains.air` | `true` | AIR |
| `contextCompaction` | compaction tool call or `compaction_update`, `_meta.jetbrains.air` | `{version: 1, trigger?, preTokens?, postTokens?, durationMs?, error?}` | AIR |
| `customAnswer` | elicitation schema property `_meta.jetbrains.air` | `{questionId, isCustomAnswer: true}` | AIR, when the client supports form elicitation |
| `kind` | session mode `_meta.jetbrains.air` and mode config option value `_meta.jetbrains.air` | `standard`, `plan`, `auto_review`, or `full_access` | AIR |
| `kind` | available command `_meta.jetbrains.air` of a skill | `skill` | AIR, when the skill's `SKILL.md` is found; not for a built-in command or an MCP prompt |
| `skillPath` | available command `_meta.jetbrains.air` of a skill | absolute path of the skill's `SKILL.md` | AIR, together with `kind: "skill"` |
@@ -199,6 +214,21 @@ The adapter keeps them where they are.
| `steering` | `initialize` response `_meta.steering = {supported: true}` | The agent accepts `_session/steering` for a running turn. |
| `quota` | `PromptResponse._meta.quota` | Token usage of the turn, also split by model. |
| `authStatus` | `initialize` response `agentCapabilities._meta.authStatus` | The agent pushes `_auth/status_update`. The object carries no payload. |
| `promptSuggestions` | `session_info_update._meta.promptSuggestions = {suggestions: [{text}]}`, AIR only | The prompt the agent predicts for the next turn. An empty list clears it. |
## Auth source display
The connection-scoped `_auth/status_update` continues to report agent-owned authentication, not client-owned `providers/set` routing. When the active key source is `apiKeyHelper`, the adapter reads the effective helper command through SDK `resolveSettings` / the session's `SettingsManager`, including programmatic settings overrides.
A command containing the whole word `central` and the word sequence `proxy start` is displayed as:
```json
{"authStatus":{"kind":"gateway","label":"JetBrains Air Gateway"}}
```
Matching is case-insensitive and accepts multiple whitespace characters between `proxy` and `start`. The command's flags, URL, host and route are not checked. This is a weak display heuristic, not proof of configuration provenance, account ownership or entitlement. Inactive helpers and external cloud backends retain their existing classification. No helper command, key, headers, private route or inferred account is included in this payload.
Other active helpers use `label: "Anthropic API key"` and `detail: "API key helper"`; unknown key-source identifiers are not exposed as display text. CLI and SDK reads share this presentation, retain stale-probe protection, and suppress unchanged notifications.
## Zed conventions
@@ -209,6 +239,7 @@ An AIR client that declares `terminal_output_delta` gets appends instead of `ter
A command tool call then has `content: [{type: "terminal", terminalId}]` and `_meta.terminal_info = {terminal_id}`.
The output goes in `_meta.terminal_output = {terminal_id, data}`.
The end sends `_meta.terminal_exit = {terminal_id, exit_code, signal: null}`.
A command that ends without a result (a cancel stopped its subagent, say) gets the exit on the report that closes its tool call, with no exit code (`null`; AIR gets `1`).
- A client that declares neither `terminal_output` nor `terminal_output_delta` gets no terminal.
The command output is a `console` code block in `content`.
- A client that declares `clientCapabilities._meta["terminal-auth"]: true` gets `_meta["terminal-auth"] = {command, args, label}` on the terminal login methods.
@@ -301,10 +332,14 @@ For every tool, a client that is not AIR also gets these upstream fields:
| `TodoWrite`, `TaskCreate`, `TaskUpdate`, `TaskList`, `TaskGet` | The stream reports them as a standard `plan` with entries. Only a permission request shows them as a tool call. | A plan that repeats the previous plan is not sent. | Every plan goes out. |
| `ReportFindings` | `kind: think`, `title: "Report <n> findings"`. | With `rawInputRendering`, no copy of the findings in `content`. | none |
| MCP tools (`mcp__*`) and other tools | `kind: other`, `title` is the tool name. The result text goes to `content`. | `_meta.is_mcp_tool_call` for MCP. | none |
| MCP tools (`mcp__*`) and other tools | `kind: other`, `title` is the tool name. The result text goes to `content`. | `_meta.is_mcp_tool_call` for MCP, and `_meta.jetbrains.air.mcp = {server, tool}`. | none |
| Context compaction | `compaction_update` when the client declares `session.compaction`. Otherwise a synthetic tool call. | Both forms carry `_meta.jetbrains.air.contextCompaction`. | See [Context compaction](#context-compaction). |
| Background work that is not a subagent | none | With `asyncTasks`, async task updates. | none |
`_meta.jetbrains.air.mcp` comes from the tool name `mcp__<server>__<tool>`, on `tool_call` and on a `tool_call_update` that changes it.
`server` is the part up to the next `__`. `tool` is the whole rest and can contain `__`, as in Claude Code.
A name that does not split (`mcp__x`) gets no `mcp` key, and `_meta.is_mcp_tool_call` still marks it.
## Diff patch
The diff patch extension lets the adapter send one compact Git patch instead of file text snapshots.
@@ -491,6 +526,21 @@ The plan text goes out as before in these cases:
AIR then shows the in-memory `plan` text.
A client that is not AIR always gets the whole SDK input, like upstream.
## Session hooks
The adapter accepts session hooks from any client, without a capability.
AIR puts the hooks into `_meta.claudeCode.options.settings.hooks` of `session/new` and `session/load`:
- The settings go to the flag settings tier of that session only. Other sessions and the settings files do not change.
- Claude Code runs the hooks of every settings tier, so the user, project and IDE hooks of one event all run. `src/tests/session-hooks.test.ts` checks this with the Claude Code binary.
-`CLAUDE_MODEL_CONFIG` stays in effect (see [Model configuration](model-configuration.md#precedence)).
- A `session/load` with different settings recreates the query, so it applies the new hooks.
- Claude asks for no hook trust step.
## Permission presentation
The adapter uses standard ACP permission requests and responses.
@@ -564,6 +614,7 @@ The client already has the rest of the tool call, because the adapter sends the
-`content` is present only with an exact preview patch for a `diffPatch` client.
-`locations` is present only when a valid `blockedPath` is not a location of the tool call yet.
-`_meta.claudeCode.mcpServer` names the MCP server of an `mcp__*` tool.
It is the server name as authored in the config. `_meta.jetbrains.air.mcp.server` on the tool call is the normalized name (characters outside `[a-zA-Z0-9_-]` replaced by `_`), so the two can differ.
A client that is not AIR gets the upstream request `toolCall`: `toolCallId`, `name`, `status: pending`, the whole `rawInput`, `title`, `kind`, `content`, and `locations`.
Its `_meta.claudeCode` carries `toolName`, and `parentToolUseId` for a subagent tool call, next to `mcpServer`.
@@ -656,7 +707,7 @@ A non-empty plan also gets one clear-context choice with the same priority.
After that choice, the adapter stops the old private Claude query and hides that internal rejection.
It starts a new private query under the same ACP session.
It continues the turn with `Implement the following plan:` and the complete plan.
The mode, model, agent, effort, Fast mode, and turn usage stay the same.
The mode, model, agent, effort, Fast mode, ultracode, and turn usage stay the same.
The SDK cannot apply `allowedPrompts` again, so those hints do not survive the handoff.
The adapter does not allow a callback only because the session mode is `bypassPermissions`.
@@ -779,6 +830,37 @@ While that command is pending, the adapter ignores late updates for the previous
A matching runtime `active_goal` stays authoritative and adds the iteration, reason, and timestamp.
A failed command restores the previous state.
## Predicted follow-up prompt
After a turn, the Claude Code CLI can predict the prompt the user is likely to send next.
The adapter asks for it with the SDK option `promptSuggestions: true` and forwards the one prediction of the turn.
ACP has no field for a composer prefill, so the prediction travels outside the AIR namespace:
```json
{
"sessionUpdate":"session_info_update",
"_meta":{"promptSuggestions":{"suggestions":[{"text":"Run the tests"}]}}
}
```
The key names no vendor, so another client can read it.
The adapter sends it only to an AIR client; see the [compatibility rule](#compatibility-rule).
AIR shows the first non-blank `suggestions[].text` as gray text in an empty composer.
Tab fills the composer with it and sends nothing.
`suggestions: []` clears the prediction the client holds. The adapter clears it:
- when the next `session/prompt` arrives, because that turn's prediction is spent;
- on a `conversation_reset`, because the prediction was drawn from the transcript the reset dropped.
A prediction the next prompt outran — the user sent it before the adapter read the prediction off the SDK stream — is dropped instead of published.
The CLI predicts nothing on the first turn of a session, after an API error, in plan mode, and at the account's usage limit, so many turns end with no prediction.
A client must treat a turn without one as normal.
A caller can turn the whole feature off with `_meta.claudeCode.options.promptSuggestions: false` on `session/new`; a user can turn it off in Claude Code settings or with `CLAUDE_CODE_ENABLE_PROMPT_SUGGESTION=false`.
## Recommended config values
The `recommendedValue` extension lets a client show concrete model and effort choices without an ambiguous `default` row.
@@ -915,6 +997,20 @@ When an announced task leaves that list, the adapter reports `stopped`.
A later terminal event can correct that state to `completed` or `failed`.
At shutdown, the adapter finishes each open task as `failed` or `stopped`.
### Autonomous turn
Claude Code can start a turn of its own after the prompt ended, for example to answer the notification of a finished background task.
ACP v1 has no session state, so the adapter publishes such a turn as an async task.
The task has the id `autonomous-turn-<uuid>`, the name `Claude is working`, `taskType: "turn"`, and `showInTranscript: false`.
Its description is the summary of the last task notification, when there is one.
The task starts at the SDK `running` state while no prompt is active or queued.
When the state stays `running`, as it does while background agents run, it starts at the first root output with no prompt open.
It ends `completed` at the result of the turn or at the SDK `idle` state, and `failed` at an error result.
A coalesced placeholder result (`num_turns: 0`) does not end it.
A prompt that the turn takes in ends the task, because that prompt owns the turn now.
A stop request interrupts the turn instead of stopping an SDK task.
It returns `{ "stopped": false }` while a prompt waits for its turn, because the interrupt would drop that prompt.
### Stop request
The client sends `_session/async_task/stop`:
@@ -1165,8 +1261,9 @@ This section covers only the AIR bridge.
- The canonical client field is `clientCapabilities.subagents: {}`.
- Released ACP SDKs can strip that draft field.
AIR can instead declare `nativeSubagentSessions` in `_meta.jetbrains.air.capabilities`.
- Either signal enables native subagent sessions. The canonical field takes precedence when it is available.
- The agent advertises `nativeSubagentSessions` to AIR, and `agentCapabilities.sessionCapabilities.subagents` to every client.
- Either signal enables native subagent sessions, and AIR gets this earlier draft of the RFD whichever it declares.
- The agent advertises `nativeSubagentSessions` and `agentCapabilities.sessionCapabilities.subagents` to AIR.
- A client that is not AIR and declares `clientCapabilities.subagents` gets the revised RFD instead (`subagent_update`, `session_message`), see the README.
- With native sessions, the adapter sends `subagent_spawned` and `subagent_state_update`.
The child output goes to the child session. The Agent or Task tool call is not the subagent card.
-`subagent_spawned` can carry an optional `prompt`: the exact prompt of the child session.
@@ -1177,6 +1274,313 @@ This section covers only the AIR bridge.
Child interactions stay on the root session.
- A client that uses the older `_meta["subagent-transcript"]` capability or the `forwardSubagentText` session option keeps the flat child transcript.
## Session index
The session index makes `session/list` a bounded, ordered page with row metadata, and adds rename, archive and a list subscription.
### Activation
AIR declares `sessionIndex` in `_meta.jetbrains.air.capabilities`.
Unlike the other capabilities, the agent advertises `sessionIndex` only to a client that declared it, and never under ACP v2.
Exactly when it advertises `sessionIndex`, the agent also advertises `sessionArchive` (it supports `_session/archive` and `_session/unarchive`), `sessionRename` (it supports `_session/rename`), `sessionListSubscribe` (it supports `_session/list/subscribe` and `_session/list/unsubscribe`) and `sessionWorktrees` (rows carry `agentWorktree`, see [List response](#list-response)).
The client does not declare these four; declaring them without `sessionIndex` enables nothing.
Everything in this section applies only to such a client, except where [Delete and close](#delete-and-close) says otherwise.
A client without the capability gets the `session/list` of before: the SDK `listSessions` call, pages of 1000 by file mtime, `offset:N` cursors, and no row `_meta`.
It gets no new notification, and the adapter starts no watcher for it.
-`limit` is an integer of at least 1; omitted or `null` is 50. The adapter clamps it to 200 and never returns more. Another value (a string, a fraction, 0 or less) is `-32602`.
-`includeWorktrees` is a boolean, `false` when omitted or `null`. Another value is `-32602`.
Without it, the page holds the sessions that the SDK `listSessions` lists for `cwd`: the transcripts of its project directory (`cwd` with symlinks resolved, encoded as the CLI names the directory).
As in the SDK, a transcript there whose cwd (its last `relocated` cwd, else its first `cwd`) is another path that encodes to the same name (`/ws/app.v2` and `/ws/app-v2`, `/a/b` and `/a-b`) is left out only while that path still exists and resolves to another path; once it is gone, the session is listed under `cwd`.
With `true`, the page also holds the sessions of the same subdirectory of `cwd` in every other existing worktree of its repository, as the Codex TUI expands a cwd: for `/repo/packages/a`, `/wt1/packages/a` if that directory exists. For a cwd at a worktree root, that is the worktree roots.
-`archived` and `includeWorktrees` treat `null` as omitted.
-`archived` is one of three strings: `"unarchived"` lists the unarchived sessions only, `"archived"` the archived sessions only, and `"all"` both together, in one order.
Omitted or `null` is `"unarchived"`. Any other value, including a boolean, is `-32602`.
The filter applies before pagination.
- Without `cwd` the page holds the sessions of all projects.
### List response
- Rows are ordered by the last user activity descending, then by session id: `lastPromptAt`, else `updatedAt` for a row without it.
A session the agent kept working on after the last prompt does not move up, as in Codex Desktop and the AIR session tree.
With `archived: "all"`, archived and unarchived rows merge on the same key.
- Every row has `updatedAt`: the time of the last message of any kind, capped at the transcript mtime.
A rename, an archive, or another metadata record moves neither `updatedAt` nor the order.
- The cursor is opaque. It holds the position (the order key and session id of the last row) and the `cwd`, `includeWorktrees` and `archived` it was issued for; another value of any of them rejects it with `-32602`. `limit` may change from page to page.
- A deleted session is never listed, whatever `archived` says.
- A page with `nextCursor` is never empty, and a page never repeats a row of the pages before it.
- With `includeWorktrees`, the worktrees come from `<git-common-dir>/worktrees/*/gitdir`, without running git; a worktree whose directory no longer exists is left out.
A path longer than the CLI's 200-character directory name limit matches directories by name prefix, so such a directory counts only when one of its transcripts belongs to the path (its last `relocated` cwd, else its first `cwd`), as the SDK checks.
A row's `cwd` is the session's own directory, so it can be a worktree path.
- A row's `title` is the session's agent name, as AIR's native Claude provider ranks it: the top-level `agentName` of the last record that has one in the transcript's 64 KB tail, else in its 64 KB head.
Without one, it is the title the SDK reports for the session (`summary` of `getSessionInfo`): its custom title (tail, the CLI's `custom-title.json` sidecar, head) or AI title, else the last prompt, a summary or the first prompt.
When the SDK reads another copy of the session than the listed transcript, the same title is taken from the listed transcript's 64 KB head and tail.
The `[archived] ` prefix of an archived session is not part of the title (see [Archive](#archive)).
- Sidechain and subagent transcripts, transcripts without a message, and transcripts without a title are not listed.
- A session copied to several project directories of the scope is listed once, as the SDK lists it: from its most recently modified transcript that is listed.
- A transcript continued in another session (a `continued-in` record) whose successor has history is not listed, as in the SDK list.
- On macOS a project directory whose name differs from the cwd's encoding in case only is the cwd's directory, as the file system resolves it for the SDK.
- A row's `cwd` comes from the transcript (the last `relocated` record, else the first `cwd`, else the last `cwd` or one of its parents) when it encodes to the project directory name.
Otherwise it is the requested path of that directory, else the `cwd` of another session in the same directory, read further if the page does not hold one.
-`updatedAt` needs the last message and the order key the last prompt: when the 64 KB tail window lacks either, the window grows up to 4 MB to find it, reading only the new bytes each step. A last message longer than that gives the last `timestamp` of the file's last 64 KB, so title records appended after it move nothing.
The directory name is never decoded.
Each row carries `_meta.jetbrains.air` with flat row fields of the RFDs. `archived` is always there (see [Archive](#archive)); every other field is omitted when unknown:
-`lastPromptAt` is the time of the last real user prompt in the transcript tail: prompt text (the predicate of the SDK title extractor) or an image or a document, but not a tool result, a meta or compact summary record, a slash command or an interrupt. When a long answer or tool output follows the last prompt, the tail window grows (256 KB, 1 MB, 4 MB) to find it; it is omitted only when the last 4 MB hold no prompt.
-`model` is the model of the last assistant message in the tail; messages the CLI makes up (`<synthetic>`) do not count.
-`forkedFrom` is the parent session id that the SDK `forkSession` and the CLI fork write on every copied record (`forkedFrom.sessionId`). Sessions started any other way have none.
-`agentWorktree` is `true` when the session runs in a linked git worktree that Claude Code made for it (`claude --worktree`, or the worktree tools), and omitted otherwise, never `false`. The transcript rule is the one of AIR's native Claude provider; the adapter adds the git check of the row's `cwd`:
- the transcript holds `worktree-state` records, `{"type":"worktree-state","worktreeSession":{originalCwd, worktreePath, worktreeName, worktreeBranch, originalBranch, originalHeadCommit, sessionId, hookBased?, enteredExisting?}}`, which the CLI writes when the session enters or leaves a worktree;
- the last line that parses as a `worktree-state` record decides, whatever it holds: the session is marked only when its `worktreeSession` is an object without `enteredExisting: true` (`enteredExisting` means a worktree that existed before, so not made for the session). Any other `worktreeSession` (`null`, which the CLI writes when the session leaves the worktree, a missing key, or a value that is no object) means not marked, and an older record does not count then. Only lines that are not JSON, such as the cut first line of a window, are skipped;
- the row's `cwd` must lie in a linked worktree: the adapter reads the git files, without running git. It takes the nearest `.git` above `cwd`, follows a `.git` file to its git dir, reads `commondir`, and requires the git dir to be `<git-common-dir>/worktrees/<name>`. This is checked on every `session/list` and on every row a subscription reads, not cached. The main checkout, a submodule and a directory outside a repository never get the field, and neither does a worktree the user made (it has no record). The adapter does not use `environment.isWorktree` or `git worktree list`;
-`hookBased` is not read: a worktree a `WorktreeCreate` hook made is marked only when its directory is a linked git worktree as above, so a hook that makes a plain directory or a checkout of another VCS gives no field. The repository is the nearest one to `cwd`: a session in a repository nested in a linked worktree is not marked, and one in a linked worktree of a nested repository is;
- the record is read from the 64 KB tail, else from the 64 KB head, and from the wider tail when the window grows to find the last prompt (see `lastPromptAt`). `claude --worktree` writes it at the start of the session, and the CLI writes it again with the other session metadata at the end of the transcript (on exit and as the transcript grows), so one of these windows almost always holds the latest one. A session that entered or left a worktree in the middle of a long transcript, with no metadata written since, keeps its old value until the CLI writes the metadata again;
- a session that made a worktree mid-session (EnterWorktree) is marked too: the CLI moves its transcript to the worktree (a `relocated` record), so the row's `cwd` is the worktree path, not the directory the session started in. The row's `cwd` is always the session's own directory, so the worktree path;
- a subscription does not send a row again when only git metadata changes, such as a manual `git worktree remove` or `git worktree move`: the field is checked again only when the transcript changes, or when the rescan finds that the worktrees of the scope changed and resolves the rows again. `session/list` checks it on every read.
-`state` is `running`, `idle`, `requires_action`, or `error`, never `unknown`. `error` means the session is not running and its last turn ended with an error; a user cancel or interrupt is no error, and a new turn clears it:
- a session this connection runs: the SDK `session_state_changed` state; `error` instead of `idle` when its last turn failed (an error result, `is_error` or an `error_*` subtype, that was not a cancel). A session whose query failed here (not a cancel) is reported as any other session, but `error` until its transcript shows a prompt or a turn end after the failure, unless a busy or waiting interactive CLI holds it;
- a session no live Claude Code process holds: `idle`, or `error` when its last turn ended with an API error (an assistant record with `isApiErrorMessage: true`, also when the CLI's turn-end records follow it, with no prompt after it);
- a session that an interactive CLI holds (not an `sdk-*` entrypoint) whose registry status is newer than the transcript: `busy` and `shell` are `running`, `waiting` is `requires_action`, `idle` is `idle`, or `error` after such an API error;
- any other held session whose last turn ended with an open background task: `running`, also after 10 minutes, until the registry status is `idle`. Claude Code wakes the session again when the task ends, so the session gets one `idle` at the last turn end, not one for each task. A background shell command (`toolUseResult.backgroundTaskId`) or an async sub-agent (`isAsync` with an `agentId`) opens a task. Its `<task-notification>` with a `<status>`, as a user record or a `queue-operation``remove`, or the result of a `TaskStop` call closes it. A notification without a `<status>`, such as the check-in of a quiet shell or a `Monitor` event, keeps it open. Sidechain records open no task. The tail gives the tasks on top of those of an earlier scan when the file only grew within the tail; else the whole transcript is read, and only for such a held session. A background task that a sub-agent starts is not seen: it is only in the transcript of the sub-agent;
- any other held session: `idle` after a finished turn (an assistant `end_turn`, a user interrupt, or the CLI turn-end records), `error` after a turn that ended with an API error, `running` for an unfinished turn written in the last 10 minutes, and no state otherwise.
- The live processes come from `<config>/sessions/<pid>.json`, with the liveness rules of Claude Desktop: `kill(pid, 0)` (or `EPERM`), a matching `procStart`, no foreign `pidDomain`, and records older than 24 hours only with a matching `procStart`.
The adapter never reads the `.key` files there and never changes the directory.
-`lastTurnEndedAt` is when the last turn ended.
-`cost` is the `total_cost_usd` that the SDK gave in the last result of a session this connection runs, when it is greater than 0. Any other session has no `cost`: the adapter neither reads nor estimates one from a transcript.
- A blank title is `-32602`. The adapter collapses whitespace and keeps the first 200 characters, trimmed, as the CLI does. An `[archived] ` prefix of the requested title is dropped: a rename never changes the archive state.
- The title is stored as the title records of [Archive](#archive): a `custom-title` and an `agent-name` record. An archived session keeps its `[archived] ` prefix (and the title is cut to 200 characters with it), so a rename does not unarchive it.
- A session that runs here on a CLI without the `rename_session` control request is refused with `-32600`: its CLI holds the title and would write it back.
- A session this connection runs is renamed through its CLI (`rename_session` control request), which writes the records and the sidecar of its own transcript.
A title generation in flight finishes first, and no generated title replaces the new one, also after a reload.
The adapter then sends `session_info_update { title }` with the title as stored, without the archive prefix.
Copies of the session in other project directories get the records and sidecar from the adapter.
- Any other session gets the records in every transcript of the session and the CLI's `custom-title.json` sidecar next to each (mode 0600, written atomically).
- As with the CLI's `/rename`, the records are written whether or not another Claude Code process has the session open. A transcript whose last line is incomplete gets a newline before the records.
Both are idempotent and work for a session that is not loaded.
Archiving a session stops it; unarchiving does not start it.
The archive state lives in the session title, in the format of AIR's own Claude integration, so AIR's native Claude path and this adapter read and write the same state:
- A session is archived when its name, with whitespace collapsed, starts with `[archived] `. As in AIR's native Claude provider, the name is the agent name (see [List response](#list-response)), else the custom title the SDK reports for it (`customTitle`); the agent name wins when both are there.
So an `agent-name` record with the prefix archives a session whose custom title has none, and one without the prefix unarchives a session whose custom title has it. No other title is read for the archive state.
- Archive appends the title records of `[archived] ` plus the current title without the prefix; unarchive appends those of the title without the prefix. The title is cut to the CLI's limit, its first 200 characters, trimmed; a session without a title is `Session ` plus the first 8 characters of its id.
- The title records are two lines, appended together to every transcript of the session:
```json
{"type":"custom-title","customTitle":"[archived] Fix the parser","sessionId":"…"}
{"type":"agent-name","agentName":"[archived] Fix the parser","sessionId":"…"}
```
A transcript already in the requested state gets nothing. A `custom-title.json` sidecar that the adapter finds is rewritten with the same title (also one left in the other state next to a transcript already in the requested state); the adapter creates none. The CLI of a session that runs here writes the sidecar of its own transcript, as for a rename.
The current title is the title of each transcript (see [List response](#list-response)), with the prefix only when the transcript is archived. For a session that runs here, it is the title last stored through its CLI while the last custom title of its transcript is that title; otherwise the transcript's.
Every `[archived] ` prefix of the current title is removed before one is added, so unarchive also unarchives a title stored with the prefix twice.
A new session archived before it has a title gets `[archived] Session …`, and keeps `Session …` as its name once unarchived: no title is generated for a named session.
- The list shows the title without the prefix, and so does the `session_info_update { title }` of a loaded session for an AIR client. Another client, and the `claude --resume` picker, show the title as stored, with the prefix.
- Archive of a session loaded on this connection stops it, as Codex's `thread/archive` unloads its thread:
1. it cancels the running turn, as `session/cancel` does, and sends the CLI the interrupt;
2. it retitles the session through its CLI (`rename_session`), as for [Rename](#rename): the CLI keeps the title in memory and writes it again, so only its own write cannot be overtaken. A title generation in flight finishes first, and no generated title replaces the archived one. The CLI writes the custom title before it answers and the agent name only later, so when the CLI's transcript has another agent name, the adapter appends the `agent-name` record of the new title to it at once. Its copies in other project directories get the records from the adapter as a best effort;
3. it closes the session as `session/close` does: the cancelled prompt ends with `cancelled`, and the session is no longer loaded. A later `session/prompt` fails as for a closed session; to work in it again, the client unarchives it and loads it.
4. it archives each transcript that the closed CLI left unarchived once more, with the title records.
If the retitle fails, the archive fails and the session stays loaded, with its turn cancelled.
A new session archived before the CLI wrote its transcript may have none once it is closed: it is then unknown (`-32002`) and not listed.
- Unarchive neither loads nor resumes the session. A session loaded on this connection keeps running and is retitled through its CLI, as for archive.
- Archive and unarchive of a session that is not loaded here write the title records, also when another Claude Code process has the session open, as for [Rename](#rename). That process keeps running. AIR's native Claude path stops the session's processes before it archives.
- Closing, loading or resuming a session does not change its archive state.
- After either, a session that was loaded on this connection gets `session_info_update` with `_meta.jetbrains.air.archived` set to the new state; no standard field changes. An archive sends it once the session is closed, as the last update of the session.
- Neither changes `updatedAt` or the list order: the title records are metadata.
- A session without a transcript (unknown, deleted, or removed by the CLI cleanup) is `-32002`. Unarchive never brings back a deleted session.
Only a new session that runs on this connection and has not finished a turn yet may have no transcript: it can be archived before the CLI writes one, and the CLI writes the title with it.
A loaded session whose query ended, that finished a turn, or that was loaded, resumed or forked from history needs its transcript.
- Rename, archive, unarchive and delete of one session run one at a time.
In all of the session index methods and in `session/delete`, a session id matches exactly: a transcript is the file named by the id as given.
Loading an archived session does not unarchive it.
The CLI cleanup still deletes old transcripts (`cleanupPeriodDays`), archived or not.
- `cwd` is required and must be an absolute path; a missing, non-string or relative `cwd` is `-32602`. Other parameters are ignored.
- The scope is the sessions of `cwd` and of the same subdirectory in every existing linked worktree of its repository, as a list with `includeWorktrees: true` resolves it, in any archive state. Sidechain and subagent transcripts are left out, as in the list.
- `sessions` holds the full current row of each session in scope that appeared, or whose `title`, `lastPromptAt`, `state`, `lastTurnEndedAt`, `cost`, `model`, `forkedFrom`, `agentWorktree` or `archived` changed since the last row sent for it on this subscription. A row is exactly the row of `session/list`, `_meta.jetbrains.air` included.
- After subscribe, the first change of each session sends its row in full, even when only `updatedAt` changed. From then on, a change of `updatedAt` alone sends nothing; the new `updatedAt` comes with the next change.
- `removed` holds the ids of sessions that left the scope: deleted (the transcript is gone), or moved to a path outside it. It may name a session the client does not list (one it never listed, one the list hides, such as a session continued in another one when that one changes); the client ignores such an id.
- Archive and unarchive are row changes (`archived`): their title records are a transcript change. The agent applies no archive filter: the client filters.
- A session is sent at most once a second per subscription. All changes of one pass go in one notification per subscription.
- Changes are tracked from the moment subscribe returns: the client subscribes first, then reads the first page with `session/list`. A row the page also holds may be sent.
- A transcript change is sent 150 ms after the last change of a burst, at most 1 s after the first; the state of a session that this connection runs is sent at once.
- Delivery is best effort: there is no resync and no sequence number. A rescan every 10 s, and one 1 s after the adapter starts watching a project directory, sends any difference it finds as a normal change. The client should still read the list now and then.
It is idempotent, and an unknown id also returns `{}`.
- A subscription lives until unsubscribe or until the connection closes; it has no time limit.
- A connection has at most 128 subscriptions. The 129th subscribe is `-32602` with `data.reason: "too_many_subscriptions"`.
- A second subscription of the same `cwd` is independent: it has its own id, its own unsubscribe and its own notifications.
- The adapter watches, without recursion, the project directories of the scope, the projects directory (for a new project directory), `<config>/sessions`, and the nearest existing parent of any of these that does not exist yet. All subscriptions of one `cwd` share that watching, which ends with the last of them.
- Subscribe reads no session row. The first subscription of a `cwd` opens the watchers, stats every transcript of the scope, and reads the registry before it returns.
- A transcript event names the file: only that transcript is read. A registry event names the record: only the sessions whose record changed get their `state` recomputed (their row is read on their first event). A session continued in a changed one is read again too.
- The rescan reads a transcript only when its stat changed or its last read failed. A session that a live process holds and that no event read gets its row, for its aging `state`, from what `session/list` already read; a worktree that came or went re-resolves only the sessions read before, by an event or by `session/list`.
- `session/list` starts or renews nothing.
### Delete and close
`session/delete`:
- a `sessionIndex` client: deletes every transcript of the session (empty ones too) and every `<sessionId>/` directory, also one left without a transcript by an earlier failed delete. Anything left behind fails the request. A session that runs here is closed first. As with the CLI, the session is deleted also when another Claude Code process has it open. An unknown session is `-32002`.
- an AIR client without `sessionIndex`: archives the session instead of deleting it (the title records of [Archive](#archive)), because AIR uses delete for "Done" and can reopen the session. A session that runs here is closed first. The list hides archived sessions from such a client too: those whose custom title, as the SDK list reports it, is archived. A session without a transcript fails with the error of the SDK delete, as before.
A `sessionIndex` client sees such a session as archived (`archived: true`), as AIR's native Claude path does.
- any other client: the SDK delete. A session without a transcript (unknown, deleted before, or
never prompted) succeeds, as ACP asks.
`session/close` of a session that is not loaded returns `{}` for every client.
`session/load`, `session/resume`, `session/prompt`, rename, archive, unarchive and delete all work on a session that another live Claude Code process has open, for every client, as the Claude CLI does. Archive stops only a session that runs on this connection.
The session index is the `_meta` form of two ACP RFDs: "Session list extensions: limit, order, row metadata and change hints" and "Session Archive and Unarchive" (#2161).
Names and semantics follow them; the transport differs, and so do the `archived` list filter and the archive of a running session (see [Relation to ACP RFD #2161](#relation-to-acp-rfd-2161)):
| `_meta.jetbrains.air.list.archived` (`"unarchived"`, `"archived"`, `"all"`) | `session/list` `archived` (#2161), a boolean there |
| row `_meta.jetbrains.air.lastPromptAt`, `model`, `forkedFrom`, `state`, `lastTurnEndedAt`, `cost` | `SessionInfo` fields of the same names; the RFD `state` has no `error` |
| capability `sessionWorktrees`, row `_meta.jetbrains.air.agentWorktree` | none yet: proposed in the session list extensions RFD (agentclientprotocol/agent-client-protocol#2323) as `SessionInfo.agentWorktree`, with the capability named `agentWorktrees` there, not `sessionWorktrees` |
The archive follows the semantics of the ACP "Session Archive and Unarchive" RFD (#2161): the archive state of every row, the state report in `session_info_update`, idempotency, `-32002` for unknown and deleted sessions, and an unchanged `updatedAt`.
It differs in transport, until the RFD lands in the SDK, in the list filter, and in execution:
- archive stops a session that runs on this connection, as `session/close` does, where #2161 leaves execution alone. The "Session list extensions" RFD proposes this change to #2161;
- the list parameter has three values, not two: `"unarchived"` is the RFD's `false` (and the default of both), `"all"` its `true`, and `"archived"`, the archived sessions only, has no RFD counterpart;
- the methods are `_session/archive` and `_session/unarchive`, not `session/archive` and `session/unarchive`;
- the capability is `sessionArchive` in `_meta.jetbrains.air.capabilities`, advertised together with `sessionIndex`, not `sessionCapabilities.archive`;
- the list parameter is `_meta.jetbrains.air.list.archived`, and the state is `_meta.jetbrains.air.archived` on rows and in `session_info_update`, not the `archived` fields;
- an AIR client without `sessionIndex` still archives with `session/delete` (see [Delete and close](#delete-and-close)), which the RFD asks clients not to do.
## Background subagents
A prompt turn can start a background Agent or Task subagent.
A SendMessage tool call can also resume a subagent that ended.
Claude Code sends the result of the turn when the main agent stops, also while such a subagent still runs.
### Hold without the capability
A client that does not declare `backgroundSubagents` gets the hold of issues #864 and #866.
The adapter keeps the `session/prompt` request open while a subagent that the turn started or resumed runs.
The subagent output, its permission requests and the followup summary of the model then go out inside the turn.
The turn ends at the followup result, at an `idle` with no live subagent, at `session/cancel`, or when the next prompt starts.
The hold protects a client that stops listening at the prompt response.
### Behavior with the capability
AIR declares `backgroundSubagents` in `initialize.clientCapabilities._meta.jetbrains.air.capabilities`.
The capability applies to ACP v1 only. ACP v2 keeps the hold, and the agent does not advertise the capability to ACP v2.
- The turn ends at its result with the stop reason of the result, usually `end_turn`.
- The subagent updates, permission requests and elicitations go out after the prompt response.
- The routing does not change: the native child session, else the root session with the parent tool call in `_meta.claudeCode.parentToolUseId`.
- The followup cycle after a subagent ends is an autonomous cycle. Its updates go out of a turn. Its result does not end a turn.
- A steer with no turn in flight starts a new turn, or returns `promptRequired` when the client asks for it.
- `session/cancel` with no turn works as before: the adapter interrupts the SDK query and reports each native subagent session as cancelled.
- The tool call of a running subagent does not fail the incomplete tool call check of the turn.
- The [agent file-change report](#agent-file-change-report) of the turn does not include an edit that a subagent makes after the result.
- An open permission request of a subagent counts as an open request for the next turn and for the steer priority.
### Plan approval out of a turn
The followup cycle can call ExitPlanMode. AIR then gets the permission request out of a turn.
The request has no clear-context option, because the fresh query must continue an ACP turn.
"No, keep planning" stops only the followup cycle. There is no turn to end.
A prompt turn owns the request when the turn is active, or when Claude Code asks before the echo of its prompt.
Then the request has the clear-context option.
A turn that took over a followup cycle also owns the request of that cycle, and the accepted plan continues in that turn.
## Context compaction
The adapter implements the ACP session compaction RFD for a client that declares `clientCapabilities.session.compaction`.
@@ -1232,6 +1636,32 @@ For AIR, the companion field also carries the same value under the root key `_me
Released AIR versions read only that key.
A client that is not AIR gets neither key.
## Load replay end
ACP has no signal that the history replay of `session/load` is over, other than the response.
The adapter replays the transcript while the Claude Code CLI starts, so the history can arrive long before the response.
The client declares `loadReplayEnd` in its capabilities. The agent does not advertise it.
After the history replay of the loaded session, the agent then sends one more update for that session:
- The update has no `title` and no `updatedAt`. A `null` there would clear the value.
- It comes after every replayed update, the subagent history that the replay sends to the child sessions included, and before the `session/load` response.
- It comes also for an empty history.
- It comes for `session/load` of a new or an already live session, and for the ACP v2 `session/resume` with `replayFrom: {type: "start"}`.
- It does not come when the replay stops or fails. The replay stops when the CLI start fails during the replay.
- It does not come for a live update, and it does not come to a client without the capability.
- The `session/load` can still fail after it, for example when the CLI start fails after the replay. The event means that the recorded history arrived whole. The client decides what to do with the failed load.
## Session fork point
AIR can fork a session at one agent message.
@@ -1264,6 +1694,8 @@ It adds this object to the `session/fork` request:
When only one stored message has the fingerprint, the adapter uses that message.
- When no message matches, the request fails with `invalidParams`.
- The fork keeps the history up to that message.
- With or without this object, the forked session runs once the response arrives, so the client can prompt it without `session/load` or `session/resume`.
A later load replays its history into it, and a later resume returns it. A load or resume with other settings (`cwd`, MCP servers, additional directories, or the session options in `_meta`) restarts it, as for any loaded session.
When an ACP caller provides`settings` via `_meta.claudeCode.options.settings` in the `sessions/create` request, `CLAUDE_MODEL_CONFIG` is ignored entirely. The env var is a deployment-level fallback for cases where the caller does not configure model settings itself.
An ACP caller can provide `settings` via `_meta.claudeCode.options.settings` in `session/new` or `session/load`, as an object or a path to a settings file. The adapter merges `CLAUDE_MODEL_CONFIG` into those settings, so a caller that only adds hooks keeps the model settings. When both set the same key, the caller wins; the merge is shallow, so a caller's `modelOverrides` replaces the env var's map.
| `_meta.claudeCode.options.settings` (caller) | Highest — wins for each key it sets |
| `CLAUDE_MODEL_CONFIG` (env var) | Used for the keys that the caller does not set |
## Format details
- The value must be valid JSON. Invalid JSON will cause session creation to fail with a parse error.
- Only `modelOverrides` and `availableModels` keys are read; other keys in the JSON are ignored.
- Both fields map directly to the Claude Agent SDK's `Settings` type.
## Models of a `providers/set` gateway
When an ACP client routes the agent through a gateway with `providers/set`, the adapter lists the gateway's models before `providers/set` returns, with the provider headers:
-`anthropic`: `GET {baseUrl}/v1/models`, paginated by `has_more`/`last_id`.
-`bedrock`: `GET {baseUrl}/foundation-models` (Bedrock `ListFoundationModels`, `modelSummaries[].modelId`). Only `anthropic.` ids count. The cross-region prefix `global` when listed, else that of the first listed id with one (`eu` for `eu.anthropic.claude-sonnet-5`), becomes the session's `ANTHROPIC_BEDROCK_REGION_PREFIX`, and ids with other prefixes, or without one, are dropped.
The model picker then offers only the SDK models whose resolved model the gateway lists, matched without dates, version suffixes (`-v1:0`), `-fast`, `@` suffixes, context hints (`[1m]`) and provider prefixes, after the `availableModels` allowlist above. On Bedrock, a model the CLI resolved to another region prefix is dropped as well. When the gateway does not list the model a session runs, that is the default model or a resumed session's last model, the session switches to the first remaining picker row.
A 4xx answer means the gateway has no listing: `providers/set` succeeds and nothing is narrowed. A failed listing (network error, a status other than 2xx or 4xx, unexpected body, the 10 s timeout, an invalid header, or a base URL with credentials) fails `providers/set` with a JSON-RPC internal error, and the previous provider stays in effect. A listing that matches no SDK model leaves the session with no model to offer: there is no model config option. Gateways set through `authenticate`, `vertex` providers, and native routing are not listed. Setting the same gateway again (the same protocol, base URL and headers) reuses its listing, unless it answered 4xx; `providers/set` and `providers/disable` apply in the order they arrive, and logout clears the routing after `claude auth logout`, including a `providers/set` still listing; `providers/disable` and logout drop it.
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"content":{"text":"Fix the bug","type":"text"},"messageId":"00000000-0000-4000-8000-00000000c001","sessionUpdate":"user_message_chunk"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"content":{"text":"Check the file.","type":"text"},"messageId":"msg_r1","sessionUpdate":"agent_thought_chunk"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"content":{"text":"I will edit it.","type":"text"},"messageId":"msg_r1","sessionUpdate":"agent_message_chunk"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"rawOutput":"The file <cwd>/src/app.ts has been updated successfully.","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_r_edit"}}}
{"kind":"loadSession","payload":{"configOptions":[{"category":"mode","currentValue":"default","description":"Session permission mode","id":"mode","name":"Mode","options":[{"_meta":{"jetbrains":{"air":{"kind":"standard","version":1}}},"description":"Always ask before making changes","name":"Manual","value":"default"},{"_meta":{"jetbrains":{"air":{"kind":"standard","version":1}}},"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"_meta":{"jetbrains":{"air":{"kind":"plan","version":1}}},"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"_meta":{"jetbrains":{"air":{"kind":"auto_review","version":1}}},"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"_meta":{"jetbrains":{"air":{"kind":"full_access","version":1}}},"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","id":"model","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"modes":{"availableModes":[{"_meta":{"jetbrains":{"air":{"kind":"standard","version":1}}},"description":"Always ask before making changes","id":"default","name":"Manual"},{"_meta":{"jetbrains":{"air":{"kind":"standard","version":1}}},"description":"Automatically accept all file edits","id":"acceptEdits","name":"Accept edits"},{"_meta":{"jetbrains":{"air":{"kind":"plan","version":1}}},"description":"Create a plan before making changes","id":"plan","name":"Plan"},{"_meta":{"jetbrains":{"air":{"kind":"auto_review","version":1}}},"description":"Claude handles permission decisions","id":"auto","name":"Auto"},{"_meta":{"jetbrains":{"air":{"kind":"full_access","version":1}}},"description":"Accepts all permissions","id":"bypassPermissions","name":"Bypass permissions"}],"currentModeId":"default"},"sessionId":"<session>"}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"newSession","payload":{"configOptions":[{"category":"mode","currentValue":"default","description":"Session permission mode","id":"mode","name":"Mode","options":[{"_meta":{"jetbrains":{"air":{"kind":"standard","version":1}}},"description":"Always ask before making changes","name":"Manual","value":"default"},{"_meta":{"jetbrains":{"air":{"kind":"standard","version":1}}},"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"_meta":{"jetbrains":{"air":{"kind":"plan","version":1}}},"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"_meta":{"jetbrains":{"air":{"kind":"auto_review","version":1}}},"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"_meta":{"jetbrains":{"air":{"kind":"full_access","version":1}}},"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","id":"model","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"modes":{"availableModes":[{"_meta":{"jetbrains":{"air":{"kind":"standard","version":1}}},"description":"Always ask before making changes","id":"default","name":"Manual"},{"_meta":{"jetbrains":{"air":{"kind":"standard","version":1}}},"description":"Automatically accept all file edits","id":"acceptEdits","name":"Accept edits"},{"_meta":{"jetbrains":{"air":{"kind":"plan","version":1}}},"description":"Create a plan before making changes","id":"plan","name":"Plan"},{"_meta":{"jetbrains":{"air":{"kind":"auto_review","version":1}}},"description":"Claude handles permission decisions","id":"auto","name":"Auto"},{"_meta":{"jetbrains":{"air":{"kind":"full_access","version":1}}},"description":"Accepts all permissions","id":"bypassPermissions","name":"Bypass permissions"}],"currentModeId":"default"},"sessionId":"<session>"}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"capabilities":{},"name":"Background review","prompt":"Review the diff","sessionUpdate":"subagent_spawned","subagentSessionId":"a2","task":"Review the diff"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"capabilities":{},"name":"Check the logs","prompt":"Check logs","sessionUpdate":"subagent_spawned","subagentSessionId":"agent_late","task":"Check logs"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"capabilities":{},"name":"Fix the build","prompt":"Make the build pass","sessionUpdate":"subagent_spawned","subagentSessionId":"agent_n","task":"Make the build pass"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"capabilities":{},"name":"Plan the work","prompt":"Plan it","sessionUpdate":"subagent_spawned","subagentSessionId":"agent_outer","task":"Plan it"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"agent_outer","update":{"capabilities":{},"name":"Read the spec","prompt":"Read spec.md","sessionUpdate":"subagent_spawned","subagentSessionId":"agent_inner","task":"Read spec.md"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"capabilities":{},"name":"Explore code","prompt":"Find the parser","sessionUpdate":"subagent_spawned","subagentSessionId":"agent_1","task":"Find the parser"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"agent_1","update":{"_meta":{"claudeCode":{"parentToolUseId":"toolu_task"}},"content":{"text":" the parser.","type":"text"},"messageId":"msg_sub_1","sessionUpdate":"agent_message_chunk"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"agent_1","update":{"rawOutput":"The file has been updated.","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_sub_edit"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"<session>","update":{"capabilities":{},"name":"Summarize","prompt":"Summarize the repo","sessionUpdate":"subagent_spawned","subagentSessionId":"agent_t","task":"Summarize the repo"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"agent_t","update":{"_meta":{"claudeCode":{"parentToolUseId":"toolu_transcript"}},"content":{"text":"Look at t","type":"text"},"messageId":"msg_transcript_sub","sessionUpdate":"agent_thought_chunk"}}}
{"kind":"sessionUpdate","payload":{"sessionId":"agent_t","update":{"_meta":{"claudeCode":{"parentToolUseId":"toolu_transcript"}},"content":{"text":"The repo has ","type":"text"},"messageId":"msg_transcript_sub","sessionUpdate":"agent_message_chunk"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"AskUserQuestion"}},"content":[],"kind":"other","name":"AskUserQuestion","rawInput":{},"sessionUpdate":"tool_call_update","status":"pending","title":"Asking for your input","toolCallId":"toolu_ask"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[],"kind":"other","name":"AskUserQuestion","rawInput":{},"sessionUpdate":"tool_call_update","status":"pending","title":"Asking for your input","toolCallId":"toolu_ask"}}}
{"kind":"request","method":"elicitation/create","payload":{"message":"Which database?","mode":"form","requestedSchema":{"properties":{"question_0":{"oneOf":[{"_meta":{"_claude/askUserQuestionOption":{"preview":"CREATE TABLE t ();"}},"const":"Postgres","description":"Relational","title":"Postgres"},{"const":"Redis","description":"Key-value","title":"Redis"}],"title":"Database","type":"string"},"question_0_custom":{"description":"Type your own answer, or add a note to the option you chose above (optional).","title":"Other","type":"string"}},"type":"object"},"sessionId":"<session>","toolCallId":"toolu_ask"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"AskUserQuestion"}},"content":[{"content":{"text":"User has answered your questions: \"Which database?\"=\"Postgres\".","type":"text"},"type":"content"}],"rawOutput":"User has answered your questions: \"Which database?\"=\"Postgres\".","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_ask"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[{"content":{"text":"User has answered your questions: \"Which database?\"=\"Postgres\".","type":"text"},"type":"content"}],"rawOutput":"User has answered your questions: \"Which database?\"=\"Postgres\".","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_ask"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"compactionId":"00000000-0000-4000-8000-000000000001","error":"Context too small","sessionUpdate":"compaction_update","status":"failed"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"Edit"}},"content":[{"content":{"text":"```\nThe user doesn't want to proceed with this tool use. The tool use was rejected.\n```","type":"text"},"type":"content"}],"rawOutput":"The user doesn't want to proceed with this tool use. The tool use was rejected.","sessionUpdate":"tool_call_update","status":"failed","toolCallId":"toolu_edit"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[{"content":{"text":"```\nThe user doesn't want to proceed with this tool use. The tool use was rejected.\n```","type":"text"},"type":"content"}],"rawOutput":"The user doesn't want to proceed with this tool use. The tool use was rejected.","sessionUpdate":"tool_call_update","status":"failed","toolCallId":"toolu_edit"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"Edit"}},"rawInput":{"file_path":"<cwd>/src/app.ts","old_string":"const value = 1;"},"sessionUpdate":"tool_call_update","toolCallId":"toolu_edit"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"rawInput":{"file_path":"<cwd>/src/app.ts","old_string":"const value = 1;"},"sessionUpdate":"tool_call_update","toolCallId":"toolu_edit"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"Edit"}},"rawInput":{"file_path":"<cwd>/src/app.ts","new_string":"const value = 2;","old_string":"const value = 1;"},"sessionUpdate":"tool_call_update","toolCallId":"toolu_edit"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"rawInput":{"file_path":"<cwd>/src/app.ts","new_string":"const value = 2;","old_string":"const value = 1;"},"sessionUpdate":"tool_call_update","toolCallId":"toolu_edit"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[{"changes":[{"fileType":"text","operation":"modify","path":"<cwd>/src/app.ts"}],"patch":{"format":"git_patch","text":"diff --git <cwd>/src/app.ts <cwd>/src/app.ts\n--- <cwd>/src/app.ts\n+++ <cwd>/src/app.ts\n@@ -1,3 +1,3 @@\n line 1\n-const value = 1;\n+const value = 2;\n line 3\n"},"type":"diff"}],"sessionUpdate":"tool_call_update","toolCallId":"toolu_edit"}}}
{"kind":"request","method":"session/request_permission","payload":{"options":[{"kind":"allow_once","name":"Yes","optionId":"allow-once"},{"kind":"reject_once","name":"No","optionId":"reject"}],"sessionId":"<session>","subject":{"toolCall":{"content":[{"changes":[{"fileType":"text","operation":"modify","path":"<cwd>/src/app.ts"}],"patch":{"format":"git_patch","text":"diff --git <cwd>/src/app.ts <cwd>/src/app.ts\n--- <cwd>/src/app.ts\n+++ <cwd>/src/app.ts\n@@ -1,3 +1,3 @@\n line 1\n-const value = 1;\n+const value = 2;\n line 3\n"},"type":"diff"}],"kind":"edit","locations":[{"path":"<cwd>/src/app.ts"}],"name":"Edit","rawInput":{"file_path":"<cwd>/src/app.ts","new_string":"const value = 2;","old_string":"const value = 1;"},"status":"pending","title":"Edit src/app.ts","toolCallId":"toolu_edit"},"type":"tool_call"},"title":"Edit src/app.ts"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"Edit"}},"rawOutput":"The file <cwd>/src/app.ts has been updated successfully.","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_edit"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"Edit","toolResponse":{"filePath":"<cwd>/src/app.ts","newString":"const value = 2;","oldString":"const value = 1;","originalFile":"line 1\nconst value = 1;\nline 3\n","replaceAll":false,"structuredPatch":[{"lines":[" line 1","-const value = 1;","+const value = 2;"," line 3"],"newLines":3,"newStart":1,"oldLines":3,"oldStart":1}],"userModified":false}}},"locations":[{"line":1,"path":"<cwd>/src/app.ts"}],"sessionUpdate":"tool_call_update","toolCallId":"toolu_edit"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"rawOutput":"The file <cwd>/src/app.ts has been updated successfully.","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_edit"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"ExitPlanMode"}},"content":[{"content":{"text":"# Plan\n1. Do it","type":"text"},"type":"content"}],"rawInput":{"plan":"# Plan\n1. Do it"},"sessionUpdate":"tool_call_update","toolCallId":"toolu_plan"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[{"content":{"text":"# Plan\n1. Do it","type":"text"},"type":"content"}],"rawInput":{"plan":"# Plan\n1. Do it"},"sessionUpdate":"tool_call_update","toolCallId":"toolu_plan"}}}
{"kind":"request","method":"session/request_permission","payload":{"options":[{"kind":"allow_once","name":"Yes, manually approve edits","optionId":"exit-plan-default"},{"kind":"allow_always","name":"Yes, clear context (0% used) and use auto mode","optionId":"exit-plan-clear-auto"},{"kind":"allow_always","name":"Yes, and use auto mode","optionId":"exit-plan-auto"},{"kind":"allow_always","name":"Yes, and bypass permissions","optionId":"exit-plan-bypass"},{"kind":"reject_once","name":"No, keep planning","optionId":"reject"}],"sessionId":"<session>","subject":{"toolCall":{"content":[{"content":{"text":"# Plan\n1. Do it","type":"text"},"type":"content"}],"kind":"switch_mode","name":"ExitPlanMode","rawInput":{"plan":"# Plan\n1. Do it"},"status":"pending","title":"Approve Plan","toolCallId":"toolu_plan"},"type":"tool_call"},"title":"Ready to code?"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionUpdate":"config_option_update"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"ExitPlanMode"}},"rawOutput":"User has approved your plan. You can now start coding.\n\n## Approved Plan:\n# Plan\n1. Do it","sessionUpdate":"tool_call_update","status":"completed","title":"Exited Plan Mode","toolCallId":"toolu_plan"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"rawOutput":"User has approved your plan. You can now start coding.\n\n## Approved Plan:\n# Plan\n1. Do it","sessionUpdate":"tool_call_update","status":"completed","title":"Exited Plan Mode","toolCallId":"toolu_plan"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"plan":{"content":"# Plan\n1. Do it","planId":"plan-mode","type":"markdown"},"sessionUpdate":"plan_update"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"ExitPlanMode"}},"content":[{"content":{"text":"# Plan\n1. Do it","type":"text"},"type":"content"}],"rawInput":{"plan":"# Plan\n1. Do it"},"sessionUpdate":"tool_call_update","toolCallId":"toolu_plan"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[{"content":{"text":"# Plan\n1. Do it","type":"text"},"type":"content"}],"rawInput":{"plan":"# Plan\n1. Do it"},"sessionUpdate":"tool_call_update","toolCallId":"toolu_plan"}}}
{"kind":"request","method":"session/request_permission","payload":{"options":[{"kind":"allow_once","name":"Yes, manually approve edits","optionId":"exit-plan-default"},{"kind":"allow_always","name":"Yes, clear context (0% used) and use auto mode","optionId":"exit-plan-clear-auto"},{"kind":"allow_always","name":"Yes, and use auto mode","optionId":"exit-plan-auto"},{"kind":"allow_always","name":"Yes, and bypass permissions","optionId":"exit-plan-bypass"},{"kind":"reject_once","name":"No, keep planning","optionId":"reject"}],"sessionId":"<session>","subject":{"toolCall":{"content":[{"content":{"text":"# Plan\n1. Do it","type":"text"},"type":"content"}],"kind":"switch_mode","name":"ExitPlanMode","rawInput":{"plan":"# Plan\n1. Do it"},"status":"pending","title":"Approve Plan","toolCallId":"toolu_plan"},"type":"tool_call"},"title":"Ready to code?"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"ExitPlanMode"}},"content":[{"content":{"text":"```\n```\nThe user doesn't want to proceed with this tool use.\n```\n```","type":"text"},"type":"content"}],"rawOutput":"The user doesn't want to proceed with this tool use.","sessionUpdate":"tool_call_update","status":"failed","toolCallId":"toolu_plan"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[{"content":{"text":"```\n```\nThe user doesn't want to proceed with this tool use.\n```\n```","type":"text"},"type":"content"}],"rawOutput":"The user doesn't want to proceed with this tool use.","sessionUpdate":"tool_call_update","status":"failed","toolCallId":"toolu_plan"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[{"text":"/goal Ship the feature","type":"text"}],"messageId":"<id-1>","sessionUpdate":"user_message"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"Grep"}},"content":[{"content":{"text":"src/app.ts:2:const value = 1;","type":"text"},"type":"content"}],"rawOutput":"src/app.ts:2:const value = 1;","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_grep"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[{"content":{"text":"src/app.ts:2:const value = 1;","type":"text"},"type":"content"}],"rawOutput":"src/app.ts:2:const value = 1;","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_grep"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"NotebookEdit"}},"content":[{"content":{"text":"Updated cell cell-1 with print('hi')","type":"text"},"type":"content"}],"rawOutput":"Updated cell cell-1 with print('hi')","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_nb"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"content":[{"content":{"text":"Updated cell cell-1 with print('hi')","type":"text"},"type":"content"}],"rawOutput":"Updated cell cell-1 with print('hi')","sessionUpdate":"tool_call_update","status":"completed","toolCallId":"toolu_nb"}}}
{"kind":"response","method":"session/new","payload":{"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"sessionUpdate":"available_commands_update"}}}
{"kind":"response","method":"session/new","payload":{"availableCommands":[{"description":"Show the MCP servers and their status, or reconnect, enable, or disable a server","input":{"hint":"[reconnect|enable|disable [<server>|all]]","type":"text"},"name":"mcp"}],"configOptions":[{"category":"mode","configId":"mode","currentValue":"default","description":"Session permission mode","name":"Mode","options":[{"description":"Always ask before making changes","name":"Manual","value":"default"},{"description":"Automatically accept all file edits","name":"Accept edits","value":"acceptEdits"},{"description":"Create a plan before making changes","name":"Plan","value":"plan"},{"description":"Claude handles permission decisions","name":"Auto","value":"auto"},{"description":"Accepts all permissions","name":"Bypass permissions","value":"bypassPermissions"}],"type":"select"},{"category":"model","configId":"model","currentValue":"claude-sonnet-4-6","description":"AI model to use","name":"Model","options":[{"description":"Fast","name":"Claude Sonnet 4.6","value":"claude-sonnet-4-6"}],"type":"select"}],"sessionId":"<session>"}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolName":"Bash","toolResponse":{"decisionReason":"Denied by rule Bash(rm:*)","decisionReasonType":"rule","message":"Permission to use Bash has been denied."}}},"content":[{"content":{"text":"Permission denied: Denied by rule Bash(rm:*)","type":"text"},"type":"content"}],"sessionUpdate":"tool_call_update","status":"failed","toolCallId":"toolu_denied"}}}
{"kind":"notification","method":"session/update","payload":{"sessionId":"<session>","update":{"_meta":{"claudeCode":{"toolResponse":{"decisionReasonType":"rule","message":"Permission to use Bash has been denied."}}},"content":[{"content":{"text":"Permission denied: Denied by rule Bash(rm:*)","type":"text"},"type":"content"}],"sessionUpdate":"tool_call_update","status":"failed","toolCallId":"toolu_denied"}}}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
