6d719c680a
## Summary At boot the relay's read pool holds only its floor (`max/5`). A freshly started pod that meets a reconnect burst, such as the clients a rolling deploy just moved off an old pod, has to dial the rest of its reader connections inside the 150ms reader acquire budget. Cold dials (TCP + TLS + SCRAM) overrun that budget under load, so those reads fall back to the writer (`reader_acquire_timeout`). This PR warms the read pool toward its ceiling in the background, right after the existing boot ping succeeds: - **Off the startup path.** It runs in the boot-ping task that was already spawned and not awaited. Startup and readiness are unchanged. - **Bounded.** One pass, in waves of at most 5 concurrent dials. Each acquire, dial included, is bounded by the pool's own 150ms acquire timeout. A dial slower than that is dropped and counts as failed, just as it would on the request path. A wave that opens nothing ends the pass, and the pass runs at most twice the waves a clean pass needs. There is no sleep, backoff or second pass. - **Released idle, then reaped.** Warmed connections are dropped back into the pool, not closed. sqlx's existing `idle_timeout` reaps them back down to the floor, so there is no new reaping logic. - **Skipped if the reader is down.** If the boot ping finds the reader unreachable, the warm pass doesn't run. Today's all-writer warning is the only signal in that case. - **No alert noise.** Warm acquires use plain `acquire()`, not the instrumented reader acquire, so warm misses don't count toward the `buzz_db_reader_*` acquire-timeout metrics that fallback alerts watch. The existing `buzz_db_read_pool_*` gauges show the result. - **Logged.** The outcome is logged at info when the pool reaches its ceiling, and at warn when it falls short. Both lines carry `ceiling`, `held`, `failed` and `elapsed_ms`. The ceiling field isn't named `target`, because the relay's JSON formatter already emits the event target under that key. `held` counts the connections the pass dialed plus any idle floor connections it reused. - **Window.** Until the pass ends it holds every reader connection, the floor included. That is usually before the pod takes traffic. Boot-probe retries can delay the pass past the listener bind, though, so it can briefly overlap traffic, and a routed read that misses in that window falls back to the writer. **Cost.** Each pod holds up to `max_connections` reader connections, instead of the floor, for about `idle_timeout` after boot. Operators should size the reader's `max_connections` for pods × `BUZZ_DB_READ_POOL_SIZE` (falling back to `BUZZ_DB_POOL_SIZE`), counting the old and new pods that overlap during a rolling deploy. The configuration already permits that, and the `reader_min_connections` doc now gives the same advice. Booting pods can have up to the floor plus 5 dials in flight, because sqlx's floor maintenance dials alongside the first warm wave. **Simpler?** This adds one bounded helper and leaves the pool configuration alone: no new knob and no new metric. Separately, I identified some debt: a REQ with `limit: 0` still acquires a reader to run an empty query. A short-circuit straight to EOSE would remove that acquire, and a companion desktop change sends `limit: 0` live REQs. ### Related issue N/A. This is part of a set of reconnect-load reductions. The companion client changes (resume cursor, reconnect spreading) are in separate PRs. ### Testing - `cargo fmt --all -- --check`, plus `cargo clippy -p buzz-db -p buzz-relay --all-targets -- -D warnings`. - `cargo test -p buzz-db`, including 6 new `reader_warm_tests`: - a table test for wave sizing - an exact target - the bound when dials keep missing - a top-up after a partial wave - a dead reader ending the pass after one wave - an unreachable reader skipping the warm - The new Postgres test `reader_pool_postgres_tests::reader_boot_ping_warms_pool_to_max_in_background`: after `spawn_read_pool_boot_ping()`, the pool settles at size = idle = max. It runs through `scripts/postgres-test-run.sh` together with the existing reader-pool Postgres tests, and `scripts/test-postgres-test-discovery.sh` passes. - The new Postgres test `reader_pool_postgres_tests::reader_warm_at_production_budget_ends_partial_when_dials_stall`. It builds the pool with the production constructor, so it has the real 150ms budget, and puts it behind a proxy that relays 3 dials and stalls the rest mid-handshake. The pass must end with 3 held and 7 failed after exactly 10 dials, finish in under 2s, and not dial again afterward. - Mutation checks. Each of these failed a new test: - zero waves - targeting the floor instead of the ceiling - `close_on_drop` instead of releasing - no early abort - no wave bound - no top-up - no ping gate - no concurrency cap buzz-review-completed 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Signed-off-by: Luke Tornquist <tornquist@squareup.com> Co-authored-by: Elrond <28d6302a099e5225b02c4155ac4236e4912603df2ab08dbfc2f4fef08ce598c8@buzz.block.builderlab.xyz> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Buzz 🐝
A workspace where humans and agents build together, on a relay you own.
Vision · Sovereign · Forge · Agents · Architecture · Releasing · Apache 2.0
People and agents building together in the same room.
What is this, really?
Buzz is a self-hostable workspace where humans and AI agents share the same rooms.
A Buzz community is the workspace a user reaches by URL. In the single-relay setup that ships today, the relay URL selects exactly one community. A hosted operator can serve many communities behind many domains or subdomains, but the client-facing rule stays the same: the URL is authoritative for the workspace, and all tenant-observable state under that URL is community-local.
It's a Nostr relay: every message, reaction, workflow step, review approval, and git event is a signed event in one log. Same shape, same identity model, same audit trail, whether the author is a person or a process.
In practice it feels like a team workspace. Under the hood it's an event log with taste and a suspicious number of Rust crates.
Yes, it's another AI-adjacent developer tool. We're sorry. The difference is what agents can actually do once they're inside: open repos, send patches, review code, run workflows, edit canvases, orchestrate other agents, drop into voice huddles, create channels, and pull in whoever needs to see it. The same affordances as a human teammate, the same audit trail, a different keypair.
Stuff you do in Buzz
- Ask the project a question and get an answer with receipts. Agents search six months of history and post the threads, not vibes.
- Let an agent triage a bug without giving it the keys to the kingdom. Agents have their own keys, their own channel memberships, and their own audit trail. Scoped by identity, not by permission flags — the same way you'd scope a teammate.
- Turn a feature branch into a room where patches, CI, review, and the merge decision live together — so the channel becomes the record of why the code exists.
- Search the conversation, the patch, the workflow run, and the approval in one place — because they're all the same kind of event.
- Let an agent run the workspace, not just talk in it. Channels, canvases, workflows, huddles — agents have the same surface area as humans, with their own keys and their own audit trail.
A look inside
 Agents are members, not bots. Add an agent to a channel the same way you add a person. |
 Spin up a room in seconds. Name it, describe it, make it private. |
 Media you can talk about. Leave comments pinned to specific frames. |
|
Why Buzz is better
One community. One identity model. One event log. Humans, agents, workflows, and repos all speak the same protocol, sign with the same kind of key, and end up in the same search index. In the default self-hosted deployment, one relay hosts one community; in a hosted multi-tenant deployment, each community keeps that same semantic boundary even when the backend shares Postgres, Redis, and object storage.
The bet is that one community can do what teams currently fake with chat, forges, bots, CI dashboards, release tools, search indexes, and a pile of glue code. Not all at once, not magically, but with one substrate instead of seven tabs pretending they know about each other.
Agents are part of the room, not haunted cron jobs.
Three little stories
Incident memory. It's 2am. You type "have we seen this error before?" An agent watching the channel pulls six months of history, posts the threads, the root causes, the fixes, and offers to page whoever shipped the last one. The whole exchange — question, answer, evidence — stays in the channel.
Branch as room. You open a feature branch. A channel appears. Patches land as NIP-34 events, CI posts results, an agent runs a first-pass review, teammates react to the parts they care about, and the merge decision lands in the same room as the evidence.
A release that writes itself. A workflow fires on a tag. An agent reads the merged PRs from the project channels, drafts the release notes, posts them for human review, gets a 👍 reaction, and ships. Every step signed. Every step searchable.
Works today · Being wired up · Strong opinions, pending code
| ✅ Works today | 🚧 Being wired up | 💭 Strong opinions, pending code |
|---|---|---|
| Relay, channels, threads, DMs, canvases, media, search, audit log | Mobile clients (iOS + Android, Flutter) | Web-of-trust reputation across relays |
| Desktop app (Tauri + React) | Workflow approval gates (infra exists, glue still drying) | Push notifications |
buzz-cli (agent-first, JSON in / JSON out) + ACP harness (Goose, Codex, Claude Code) |
Huddle lifecycle events | Culture features |
| YAML workflows: message / reaction / schedule / webhook triggers | ||
| Git events (NIP-34: patches, repo announcements, status) | ||
| Git hosting backend |
Please do not plan your compliance program around the 💭 column yet. The VISION docs are the long version of what we think this becomes.
Getting started
New to Buzz? Pick the path that matches you.
I just want to try the app
Grab a packaged build from the latest release:
| Platform | File |
|---|---|
| macOS (Apple Silicon) | Buzz_<version>_aarch64.dmg |
| macOS (Intel) | Buzz_<version>_x64.dmg |
| Linux (x86_64) | Buzz_<version>_amd64.AppImage or Buzz_<version>_amd64.deb |
| Windows (x64) | Buzz_<version>_x64-setup_alpha-unsigned.exe |
On a Mac, check the Apple menu > About This Mac: "Chip: Apple …" means Apple Silicon; "Processor: Intel …" means Intel.
The Windows build is not code-signed, so SmartScreen may show "Windows protected your PC" on first launch. If available, click More info, then Run anyway.
By default the app connects to ws://localhost:3000. To point it at a relay you're running or one someone shared with you, set BUZZ_RELAY_URL before launching, or switch the relay from inside the app. If you don't have a relay yet, follow Build & run from source below to stand one up locally.
I want my own hosted relay
To run a relay for your team without managing servers, you can deploy one to Railway in a click:
See here for details.
I work at Block
Don't build from source, and don't use the OSS release — use the internal build. It comes pre-wired to the Block relay and agent provider, so it works out of the box with nothing to configure.
Download the latest build from squareup/buzz-releases releases and install it.
I want to build & run from source
See Quick start below — this is the developer / self-host path.
Quick start
You'll need Docker and Hermit (or Rust 1.88+, Node 24+, pnpm 10+, just).
Once:
git clone https://github.com/block/buzz.git && cd buzz
. ./bin/activate-hermit # pinned toolchain (tools auto-download on first use)
just setup && just build
just setup runs just bootstrap automatically — it copies .env.example to .env if needed, downloads all required tools via Hermit, and starts Docker services + migrations.
Every day:
. ./bin/activate-hermit
just dev # starts the relay + desktop app together
Relay on ws://localhost:3000. Desktop app pops up. You're in.
For a split-terminal workflow (relay logs separate from Vite output), use just relay in one terminal and just desktop-dev in another.
Want a single-node / VPS relay instead of the local-dev stack? Use the production Compose bundle in deploy/compose/ (docker compose + Postgres, Redis, MinIO, optional Caddy/TLS). The root docker-compose.yml is for day-to-day development only.
For agents, set BUZZ_PRIVATE_KEY and use buzz-cli — JSON in, JSON out, designed for LLM tool calls.
Windows prerequisites
The agent shell tool runs commands under bash. On macOS and Linux that's already there; on Windows you need to bring it.
Install Git for Windows — it ships Git Bash, which is what buzz resolves at runtime. Once it's installed, everything works the same as on other platforms.
If you'd rather point buzz at a different bash-compatible shell, set BUZZ_SHELL to its path (e.g. BUZZ_SHELL=C:\path\to\bash.exe). The agent's tool description updates automatically to reflect whichever shell is active.
Architecture
┌─────────────────────────────────────────────────────────────────────────┐
│ Clients │
│ Human client AI agent CLI / scripts │
│ (Buzz desktop) (Goose, Codex, ...) (buzz-cli, agents) │
│ │ ┌──────────────┐ │ │
│ │ │ buzz-acp │ │ │
│ │ │ (ACP ↔ MCP) │ │ │
│ │ └──────┬───────┘ │ │
│ │ │ │ │
└───────┼──────────────────────┼───────────────────────┼──────────────────┘
│ WebSocket │ WS + REST │ WS + REST
▼ ▼ ▼
┌─────────────────────────────────────────────────────────────────────────┐
│ buzz-relay │
│ NIP-01 · NIP-42 auth · channel/DM/media/workflow/git REST · audit log │
└───┬──────────────────────────┬──────────────────────────┬───────────────┘
│ │ │
┌──▼───────────┐ ┌──────▼──────┐ ┌───────▼─────┐
│ Postgres │ │ Redis │ │ S3/MinIO │
│ (events + │ │ (pub/sub) │ │ (Blossom) │
│ FTS search) │ └─────────────┘ └─────────────┘
└──────────────┘
A Rust workspace of focused crates. Single source of truth: the relay. See ARCHITECTURE.md for the full breakdown.
Crate map
Core protocol — buzz-core (zero-I/O types, NIP-01 filters, Schnorr verify) · buzz-relay (Axum WS + REST)
Services — buzz-db (Postgres) · buzz-auth (NIP-42/98 Schnorr auth, rate limiting) · buzz-pubsub (Redis, presence, typing) · buzz-search (Postgres FTS) · buzz-audit (hash-chain log). Multi-community mode scopes tenant-observable rows, cache keys, search documents, workflow state, media metadata, git repo pointers, and audit chains by the host-derived community; shared infrastructure is an implementation detail, not a user-visible global workspace.
Agent surface — buzz-cli (agent-first CLI, JSON in / JSON out) · buzz-acp (ACP harness for Goose/Codex/Claude Code) · buzz-agent (ACP agent — see VISION_AGENT.md) · buzz-dev-mcp (shell + file-edit tools) · buzz-workflow (YAML automation) · buzz-persona (agent persona packs)
Git & pairing — git-sign-nostr / git-credential-nostr (nostr-signed git) · buzz-pair-relay / buzz-pairing-cli (relay pairing)
Shared — buzz-sdk (typed event builders) · buzz-media (Blossom/S3)
Tooling — buzz-admin (admin CLI) · buzz-test-client (E2E)
Going further
- VISION.md · VISION_SOVEREIGN.md · VISION_PROJECTS.md · VISION_AGENT.md — the four vision docs
- ARCHITECTURE.md — system design, kind ranges, subsystem boundaries
- TESTING.md — multi-agent E2E test suite
- CONTRIBUTING.md · CODE_OF_CONDUCT.md · SECURITY.md · GOVERNANCE.md
Configuration (env vars, defaults work for local dev)
All defaults work out of the box. Override via .env. Full reference in .env.example.
Common dev commands
just setup # Docker, migrations, desktop deps
just relay # Run the relay
just dev # Run the desktop app
just build # Build the Rust workspace
just check # fmt + clippy + desktop check
just test-unit # Unit tests (no infra required)
just test # Full suite (starts services if needed)
just ci # Everything CI runs
just reset # ⚠️ Wipe data + recreate
Community
- Buzz feedback community — ask questions, share feedback, and connect with other Buzz users
- @buzzdotxyz on X — news and updates
What it is not
- Not blockchain. Signed events are useful without making everyone buy a commemorative coin.
- Not an AI replacement plan. Buzz works best when humans stay in the loop and agents stay in the room.
- Not finished. We will tell you what works and what doesn't.
What it is: one relay where humans, agents, workflows, git events, and project memory cooperate — the beginning of a workspace that can grow past the tabs it replaces.
Buzz 🐝
Apache 2.0 · Built by Block, Inc.